From: Nick Hawkins <nick.hawkins@xxxxxxx>
Description: Originally this was of a larger patch
HPE BMC GXP SUPPORT that was rejected for being to big.
This is why the label v3 is being used.
This patch Create a basic device tree layout that
will allow the HPE GXP to boot. The undocumented
bindings hpe,gxp-wdt and hpe,gxp-timer are being
documented in patches:
[v1] dt-bindings: timer: Add HPE GXP Timer binding
[v1] dt-bindings: watchdog: Add HPE GXP Watchdog timer binding
[v1]dt-bindings: vendor-prefixes: add HPE Prefix
that are currently out for review.
The dts file is largely empty for this initial patch but
follow up patches will add more content.
Information: GXP is the name of the HPE SoC.
This SoC is used to implement BMC features of HPE servers
(all ProLiant, Synergy, and many Apollo, and Superdome machines)
It does support many features including:
ARMv7 architecture, and it is based on a Cortex A9 core
Use an AXI bus to which
a memory controller is attached, as well as
multiple SPI interfaces to connect boot flash,
and ROM flash, a 10/100/1000 Mac engine which
supports SGMII (2 ports) and RMII
Multiple I2C engines to drive connectivity with a
host infrastructure
A video engine which support VGA and DP, as well as
an hardware video encoder
Multiple PCIe ports
A PECI interface, and LPC eSPI
Multiple UART for debug purpose, and Virtual UART for
host connectivity
A GPIO engine.
Signed-off-by: Nick Hawkins <nick.hawkins@xxxxxxx>
---
MAINTAINERS | 7 +
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 27 ++++
arch/arm/boot/dts/hpe-gxp.dtsi | 169 +++++++++++++++++++++++
4 files changed, 205 insertions(+)
create mode 100644 arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
create mode 100644 arch/arm/boot/dts/hpe-gxp.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index f41088418aae..ca9fcc611b1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8385,6 +8385,13 @@ L: linux-efi@xxxxxxxxxxxxxxx
S: Maintained
F: block/partitions/efi.*
+GXP ARM ARCHITECTURE
+M: Nick Hawkins <nick.hawkins@xxxxxxx>
+M: Jean-Marie <verdun@xxxxxxx>
+S: Maintained
+F: arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
+F: arch/arm/boot/dts/hpe-gxp.dtsi
+
H8/300 ARCHITECTURE
M: Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>
L: uclinux-h8-devel@xxxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 235ad559acb2..a96b4d5b7f68 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1549,3 +1549,5 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-vegman-n110.dtb \
aspeed-bmc-vegman-rx20.dtb \
aspeed-bmc-vegman-sx20.dtb
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+ hpe-bmc-dl360gen10.dtb
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..179de6945e3f
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "hpe,gxp";
+ model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200 user_debug=31";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+
+ ahb {
+
+ };
+
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
new file mode 100644
index 000000000000..f62109abf685
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+ model = "Hewlett Packard Enterprise GXP BMC";
+ compatible = "hpe,gxp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,armv7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ ranges;
+
+ vic0: interrupt-controller@ceff0000 {
+ compatible = "arm,pl192-vic";
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0xceff0000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ vic1: vic@80f00000 {
+ compatible = "arm,pl192-vic";
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x80f00000 0x1000>;
+ #interrupt-cells = <1>;
+ };
+
+ timer0: timer@c0000080 {
+ compatible = "hpe,gxp-timer";
+ reg = <0xc0000080 0x1>, <0xc0000094 0x01>, <0xc0000088 0x08>;
+ interrupts = <0>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <400000000>;
+ };
+
+ watchdog: watchdog@c0000090 {
+ compatible = "hpe,gxp-wdt";
+ reg = <0xc0000090 0x02>, <0xc0000096 0x01>;
+ };
+
+ uarta: serial@c00000e0 {
+ compatible = "ns16550a";
+ reg = <0xc00000e0 0x8>;
+ interrupts = <17>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ uartb: serial@c00000e8 {
+ compatible = "ns16550a";
+ reg = <0xc00000e8 0x8>;
+ interrupts = <18>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ uartc: serial@c00000f0 {
+ compatible = "ns16550a";
+ reg = <0xc00000f0 0x8>;
+ interrupts = <19>;
+ interrupt-parent = <&vic0>;
+ clock-frequency = <1846153>;
+ reg-shift = <0>;
+ };
+
+ usb0: ehci@cefe0000 {
+ compatible = "generic-ehci";
+ reg = <0xcefe0000 0x100>;
+ interrupts = <7>;
+ interrupt-parent = <&vic0>;
+ };
+
+ usb1: ohci@cefe0100 {
+ compatible = "generic-ohci";
+ reg = <0xcefe0100 0x110>;
+ interrupts = <6>;
+ interrupt-parent = <&vic0>;
+ };
+
+ sram@d0000000 {
+ compatible = "mtd-ram";
+ reg = <0xd0000000 0x80000>;
+ bank-width = <1>;
+ erase-size =<1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "host-reserved";
+ reg = <0x0 0x10000>;
+ };
+ partition@10000 {
+ label = "nvram";
+ reg = <0x10000 0x70000>;
+ };
+ };
+
+ vrom@58000000 {
+ compatible = "mtd-ram";
+ bank-width = <4>;
+ reg = <0x58000000 0x4000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "vrom-prime";
+ reg = <0x0 0x2000000>;
+ };
+ partition@2000000 {
+ label = "vrom-second";
+ reg = <0x2000000 0x2000000>;
+ };
+ };
+
+ i2cg: i2cg@c00000f8 {
+ compatible = "syscon";
+ reg = <0xc00000f8 0x08>;
+ };
+ };
+
+ clocks {
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "osc";
+ clock-frequency = <33333333>;
+ };
+
+ iopclk: iopclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clocks = <&osc>;
+ clock-out-put-names = "iopclk";
+ clock-frequency = <400000000>;
+ };
+
+ memclk: memclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clocks = <&osc>;
+ clock-out-put-names = "memclk";
+ clock-frequency = <800000000>;
+ };
+ };
+};
--
2.17.1
