Convert the ps2-gpio dt-binding documentation to DT schema format using
the json-schema.
Signed-off-by: Danilo Krummrich <danilokrummrich@xxxxxxxxxxxxx>
---
.../devicetree/bindings/serio/ps2-gpio.txt | 23 --------
.../devicetree/bindings/serio/ps2-gpio.yaml | 58 +++++++++++++++++++
2 files changed, 58 insertions(+), 23 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/serio/ps2-gpio.txt
create mode 100644 Documentation/devicetree/bindings/serio/ps2-gpio.yaml
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.txt b/Documentation/devicetree/bindings/serio/ps2-gpio.txt
deleted file mode 100644
index 7b7bc9cdf986..000000000000
--- a/Documentation/devicetree/bindings/serio/ps2-gpio.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Device-Tree binding for ps/2 gpio device
-
-Required properties:
- - compatible = "ps2-gpio"
- - data-gpios: the data pin
- - clk-gpios: the clock pin
- - interrupts: Should trigger on the falling edge of the clock line.
-
-Optional properties:
- - write-enable: Indicates whether write function is provided
- to serio device. Possibly providing the write fn will not work, because
- of the tough timing requirements.
-
-Example nodes:
-
-ps2@0 {
- compatible = "ps2-gpio";
- interrupt-parent = <&gpio>;
- interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
- data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
- clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
- write-enable;
-};
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.yaml b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
new file mode 100644
index 000000000000..41e43d797651
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/ps2-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO based PS/2
+
+maintainers:
+ - Danilo Krummrich <danilokrummrich@xxxxxxxxxxxxx>
+
+properties:
+ compatible:
+ const: ps2-gpio
+
+ data-gpios:
+ description:
+ the gpio used for the data signal
+ maxItems: 1
+
+ clk-gpios:
+ description:
+ the gpio used for the clock signal
+ maxItems: 1
+
+ interrupts:
+ description:
+ The given interrupt should trigger on the falling edge of the clock line.
+ maxItems: 1
+
+ write-enable:
+ type: boolean
+ description:
+ Indicates whether write function is provided to serio device. Possibly
+ providing the write function will not work, because of the tough timing
+ requirements.
+
+required:
+ - compatible
+ - data-gpios
+ - clk-gpios
+ - interrupts
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ ps2 {
+ compatible = "ps2-gpio";
+ interrupt-parent = <&gpio>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ data-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
+ clk-gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
+ write-enable;
+ };
--
2.35.1
