Re: [PATCH v2 11/11] ARM: dts: armada-385.dtsi: Add definitions for PCIe legacy INTx interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday 14 February 2022 16:07:13 Gregory CLEMENT wrote:
> Hello Pali,
> 
> > With this change legacy INTA, INTB, INTC and INTD interrupts are reported
> > separately and not mixed into one Linux virq source anymore.
> >
> > Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/armada-385.dtsi | 52 ++++++++++++++++++++++++++-----
> 
> Is there any reason for not doing the same change in armada-380.dtsi ?

I do not have A380 HW, so I did this change only for A385 which I have tested.

> Grégory
> 
> >  1 file changed, 44 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
> > index f0022d10c715..83392b92dae2 100644
> > --- a/arch/arm/boot/dts/armada-385.dtsi
> > +++ b/arch/arm/boot/dts/armada-385.dtsi
> > @@ -69,16 +69,25 @@
> >  				reg = <0x0800 0 0 0 0>;
> >  				#address-cells = <3>;
> >  				#size-cells = <2>;
> > +				interrupt-names = "intx";
> > +				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> >  				#interrupt-cells = <1>;
> >  				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> >  					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
> >  				bus-range = <0x00 0xff>;
> > -				interrupt-map-mask = <0 0 0 0>;
> > -				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> > +				interrupt-map-mask = <0 0 0 7>;
> > +				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
> > +						<0 0 0 2 &pcie1_intc 1>,
> > +						<0 0 0 3 &pcie1_intc 2>,
> > +						<0 0 0 4 &pcie1_intc 3>;
> >  				marvell,pcie-port = <0>;
> >  				marvell,pcie-lane = <0>;
> >  				clocks = <&gateclk 8>;
> >  				status = "disabled";
> > +				pcie1_intc: interrupt-controller {
> > +					interrupt-controller;
> > +					#interrupt-cells = <1>;
> > +				};
> >  			};
> >  
> >  			/* x1 port */
> > @@ -88,16 +97,25 @@
> >  				reg = <0x1000 0 0 0 0>;
> >  				#address-cells = <3>;
> >  				#size-cells = <2>;
> > +				interrupt-names = "intx";
> > +				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> >  				#interrupt-cells = <1>;
> >  				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> >  					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
> >  				bus-range = <0x00 0xff>;
> > -				interrupt-map-mask = <0 0 0 0>;
> > -				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> > +				interrupt-map-mask = <0 0 0 7>;
> > +				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
> > +						<0 0 0 2 &pcie2_intc 1>,
> > +						<0 0 0 3 &pcie2_intc 2>,
> > +						<0 0 0 4 &pcie2_intc 3>;
> >  				marvell,pcie-port = <1>;
> >  				marvell,pcie-lane = <0>;
> >  				clocks = <&gateclk 5>;
> >  				status = "disabled";
> > +				pcie2_intc: interrupt-controller {
> > +					interrupt-controller;
> > +					#interrupt-cells = <1>;
> > +				};
> >  			};
> >  
> >  			/* x1 port */
> > @@ -107,16 +125,25 @@
> >  				reg = <0x1800 0 0 0 0>;
> >  				#address-cells = <3>;
> >  				#size-cells = <2>;
> > +				interrupt-names = "intx";
> > +				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> >  				#interrupt-cells = <1>;
> >  				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> >  					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
> >  				bus-range = <0x00 0xff>;
> > -				interrupt-map-mask = <0 0 0 0>;
> > -				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> > +				interrupt-map-mask = <0 0 0 7>;
> > +				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
> > +						<0 0 0 2 &pcie3_intc 1>,
> > +						<0 0 0 3 &pcie3_intc 2>,
> > +						<0 0 0 4 &pcie3_intc 3>;
> >  				marvell,pcie-port = <2>;
> >  				marvell,pcie-lane = <0>;
> >  				clocks = <&gateclk 6>;
> >  				status = "disabled";
> > +				pcie3_intc: interrupt-controller {
> > +					interrupt-controller;
> > +					#interrupt-cells = <1>;
> > +				};
> >  			};
> >  
> >  			/*
> > @@ -129,16 +156,25 @@
> >  				reg = <0x2000 0 0 0 0>;
> >  				#address-cells = <3>;
> >  				#size-cells = <2>;
> > +				interrupt-names = "intx";
> > +				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> >  				#interrupt-cells = <1>;
> >  				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
> >  					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
> >  				bus-range = <0x00 0xff>;
> > -				interrupt-map-mask = <0 0 0 0>;
> > -				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> > +				interrupt-map-mask = <0 0 0 7>;
> > +				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
> > +						<0 0 0 2 &pcie4_intc 1>,
> > +						<0 0 0 3 &pcie4_intc 2>,
> > +						<0 0 0 4 &pcie4_intc 3>;
> >  				marvell,pcie-port = <3>;
> >  				marvell,pcie-lane = <0>;
> >  				clocks = <&gateclk 7>;
> >  				status = "disabled";
> > +				pcie4_intc: interrupt-controller {
> > +					interrupt-controller;
> > +					#interrupt-cells = <1>;
> > +				};
> >  			};
> >  		};
> >  	};
> > -- 
> > 2.20.1
> >
> 
> -- 
> Gregory Clement, Bootlin
> Embedded Linux and Kernel engineering
> http://bootlin.com



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux