Hi,
On Wed 09 Feb 22, 10:22, Maxime Ripard wrote:
> On Sat, Feb 05, 2022 at 07:53:45PM +0100, Paul Kocialkowski wrote:
> > Wrap the clock and reset preparation into runtime pm functions
> > for better organization of the code.
> >
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> > ---
> > .../platform/sunxi/sun6i-csi/sun6i_csi.c | 94 ++++++++++++++-----
> > 1 file changed, 69 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > index 2355088fdc37..b53b92b70a89 100644
> > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > @@ -152,40 +152,18 @@ int sun6i_csi_set_power(struct sun6i_csi_device *csi_dev, bool enable)
> >
> > if (!enable) {
> > regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, 0);
> > + pm_runtime_put(dev);
> >
> > - clk_disable_unprepare(csi_dev->clk_ram);
> > - clk_disable_unprepare(csi_dev->clk_mod);
> > - reset_control_assert(csi_dev->reset);
> > return 0;
> > }
> >
> > - ret = clk_prepare_enable(csi_dev->clk_mod);
> > - if (ret) {
> > - dev_err(csi_dev->dev, "Enable csi clk err %d\n", ret);
> > + ret = pm_runtime_resume_and_get(dev);
> > + if (ret < 0)
> > return ret;
> > - }
> > -
> > - ret = clk_prepare_enable(csi_dev->clk_ram);
> > - if (ret) {
> > - dev_err(csi_dev->dev, "Enable clk_dram_csi clk err %d\n", ret);
> > - goto clk_mod_disable;
> > - }
> > -
> > - ret = reset_control_deassert(csi_dev->reset);
> > - if (ret) {
> > - dev_err(csi_dev->dev, "reset err %d\n", ret);
> > - goto clk_ram_disable;
> > - }
> >
> > regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN, CSI_EN_CSI_EN);
> >
> > return 0;
> > -
> > -clk_ram_disable:
> > - clk_disable_unprepare(csi_dev->clk_ram);
> > -clk_mod_disable:
> > - clk_disable_unprepare(csi_dev->clk_mod);
> > - return ret;
> > }
> >
> > static enum csi_input_fmt get_csi_input_format(struct sun6i_csi_device *csi_dev,
> > @@ -800,6 +778,65 @@ static irqreturn_t sun6i_csi_isr(int irq, void *private)
> > return IRQ_HANDLED;
> > }
> >
> > +static int sun6i_csi_suspend(struct device *dev)
> > +{
> > + struct sun6i_csi_device *csi_dev = dev_get_drvdata(dev);
> > +
> > + reset_control_assert(csi_dev->reset);
> > + clk_disable_unprepare(csi_dev->clk_ram);
> > + clk_disable_unprepare(csi_dev->clk_mod);
> > + clk_disable_unprepare(csi_dev->clk_bus);
> > +
> > + return 0;
> > +}
> > +
> > +static int sun6i_csi_resume(struct device *dev)
> > +{
> > + struct sun6i_csi_device *csi_dev = dev_get_drvdata(dev);
> > + int ret;
> > +
> > + ret = reset_control_deassert(csi_dev->reset);
> > + if (ret) {
> > + dev_err(dev, "failed to deassert reset\n");
> > + return ret;
> > + }
> > +
> > + ret = clk_prepare_enable(csi_dev->clk_bus);
> > + if (ret) {
> > + dev_err(dev, "failed to enable bus clock\n");
> > + goto error_reset;
> > + }
> > +
> > + ret = clk_prepare_enable(csi_dev->clk_mod);
> > + if (ret) {
> > + dev_err(dev, "failed to enable module clock\n");
> > + goto error_clk_bus;
> > + }
> > +
> > + ret = clk_prepare_enable(csi_dev->clk_ram);
> > + if (ret) {
> > + dev_err(dev, "failed to enable ram clock\n");
> > + goto error_clk_mod;
> > + }
> > +
> > + return 0;
>
> You've change the order of the reset vs clock initialization.
Oh right. Is there a preference regarding the order?
It probably makes more sense to release reset once all the clocks are
ready rather than the opposite (so that would match the previous order).
> Also, does that work with CONFIG_PM disabled?
It doesn't, but the driver should really depend on PM anyway (it doesn't yet).
That makes me realize that I didn't cleanup the Kconfig entry, which
should have been updated along the way.
Will fix both next time.
Thanks for the review!
Paul
--
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com
Attachment:
signature.asc
Description: PGP signature
