Re: [PATCH v2 30/66] media: sun6i-csi: Add bridge v4l2 subdev with port management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Wed 09 Feb 22, 10:24, Maxime Ripard wrote:
> On Sat, Feb 05, 2022 at 07:53:53PM +0100, Paul Kocialkowski wrote:
> > Introduce a bridge v4l2 subdev to prepare for separation between the
> > processing part (bridge) and the dma engine, which is required to
> > properly support ths isp workflow later on.
> > 
> > Currently the bridge just manages fwnode mapping to media pads,
> > using an async notifier (which was previously in the main code).
> > The s_stream video op just forwards to the connected v4l2 subdev
> > (sensor or MIPI CSI-2 bridge).
> > 
> > The video capture device is now registered after the bridge and
> > attaches to it with a media link.
> > 
> > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
> 
> There's a bunch of checkpatch --strict warnings that need to be fixed

Yes so it turns out these are adaptations to the existing video code
which has these warnings already merged. They are cleaned up later on
in a dedicated commit, but since it's not the topic of this change
(which is a logic change) I kept the code as it is.

What do you think?

Cheers,

Paul

-- 
Paul Kocialkowski, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux