From: Rafał Miłecki <rafal@xxxxxxxxxx>
This is V2 of my:
[PATCH 0/3] nvmem: allow specifying cells by just names in DT
These changes will allow me to improve BCM5301X support with:
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 24ae3c8a3..9efcb2424 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -25,6 +25,9 @@ memory@0 {
nvram@1eff0000 {
compatible = "brcm,nvram";
reg = <0x1eff0000 0x10000>;
+
+ et0macaddr: et0macaddr {
+ };
};
leds {
@@ -72,6 +75,11 @@ restart {
};
};
+&gmac0 {
+ nvmem-cells = <&et0macaddr>;
+ nvmem-cell-names = "mac-address";
+};
+
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
Rafał Miłecki (3):
dt-bindings: nvmem: make "reg" property optional
dt-bindings: nvmem: brcm,nvram: add NVMEM cell to example
nvmem: core: add cell name based matching of DT cell nodes
.../devicetree/bindings/nvmem/brcm,nvram.yaml | 16 +++++++++--
.../devicetree/bindings/nvmem/nvmem.yaml | 3 ---
drivers/nvmem/core.c | 27 +++++++++++++++++++
3 files changed, 41 insertions(+), 5 deletions(-)
--
2.34.1
