RE: [PATCH v3 3/4] drm/panel-edp: Add eDP sharp panel support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dmitry,

As discussed over a separate email, we will be exploring using the generic panel edp and aux bus after implementing the basic PSR feature. We are using a non-generic compatible string now because we enabled PSR with this. The changes from aux-bus and generic-edp may be intrusive for the dp driver and hence we want to explore it as a separate task/feature after the basic PSR feature.

Thank you,
Sankeerth

-----Original Message-----
From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> 
Sent: Thursday, February 10, 2022 5:55 PM
To: Sankeerth Billakanti (QUIC) <quic_sbillaka@xxxxxxxxxxx>; dri-devel@xxxxxxxxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx; freedreno@xxxxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; agross@xxxxxxxxxx; bjorn.andersson@xxxxxxxxxx; robh+dt@xxxxxxxxxx; robdclark@xxxxxxxxx; seanpaul@xxxxxxxxxxxx; swboyd@xxxxxxxxxxxx; dianders@xxxxxxxxxxxx; krzysztof.kozlowski@xxxxxxxxxxxxx; thierry.reding@xxxxxxxxx; sam@xxxxxxxxxxxx; airlied@xxxxxxxx; daniel@xxxxxxxx
Cc: quic_kalyant <quic_kalyant@xxxxxxxxxxx>; Abhinav Kumar (QUIC) <quic_abhinavk@xxxxxxxxxxx>; Kuogee Hsieh (QUIC) <quic_khsieh@xxxxxxxxxxx>; quic_mkrishn <quic_mkrishn@xxxxxxxxxxx>; quic_vproddut <quic_vproddut@xxxxxxxxxxx>
Subject: Re: [PATCH v3 3/4] drm/panel-edp: Add eDP sharp panel support

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

On 09/02/2022 11:55, Sankeerth Billakanti wrote:
> Add support for the 14" sharp,lq140m1jw46 eDP panel.
>
> Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>

Please excuse my ignorance, is there any reason, why we can't use generic panel-edp here?

> ---
>
> Changes in v3:
>    None
>
>   drivers/gpu/drm/panel/panel-edp.c | 31 +++++++++++++++++++++++++++++++
>   1 file changed, 31 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-edp.c 
> b/drivers/gpu/drm/panel/panel-edp.c
> index a394a15..5d13ccc 100644
> --- a/drivers/gpu/drm/panel/panel-edp.c
> +++ b/drivers/gpu/drm/panel/panel-edp.c
> @@ -1605,6 +1605,34 @@ static const struct panel_desc sharp_lq123p1jx31 = {
>       },
>   };
>
> +static const struct drm_display_mode sharp_lq140m1jw46_mode = {
> +     .clock = 144370,
> +     .hdisplay = 1920,
> +     .hsync_start = 1920 + 48,
> +     .hsync_end = 1920 + 48 + 32,
> +     .htotal = 1920 + 48 + 32 + 80,
> +     .vdisplay = 1080,
> +     .vsync_start = 1080 + 3,
> +     .vsync_end = 1080 + 3 + 5,
> +     .vtotal = 1080 + 3 + 5 + 69,
> +     .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC, };
> +
> +static const struct panel_desc sharp_lq140m1jw46 = {
> +     .modes = &sharp_lq140m1jw46_mode,
> +     .num_modes = 1,
> +     .bpc = 8,
> +     .size = {
> +             .width = 309,
> +             .height = 174,
> +     },
> +     .delay = {
> +             .hpd_absent = 80,
> +             .enable = 50,
> +             .unprepare = 500,
> +     },
> +};
> +
>   static const struct drm_display_mode starry_kr122ea0sra_mode = {
>       .clock = 147000,
>       .hdisplay = 1920,
> @@ -1719,6 +1747,9 @@ static const struct of_device_id platform_of_match[] = {
>               .compatible = "sharp,lq123p1jx31",
>               .data = &sharp_lq123p1jx31,
>       }, {
> +             .compatible = "sharp,lq140m1jw46",
> +             .data = &sharp_lq140m1jw46,
> +     }, {
>               .compatible = "starry,kr122ea0sra",
>               .data = &starry_kr122ea0sra,
>       }, {


--
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux