On Tue 02 Sep 06:13 PDT 2014, Georgi Djakov wrote:
> Define a new binding for the Qualcomm TLMM (Top-Level Mode Mux) based pin
> controller inside the APQ8084.
>
> Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
Don't remember giving you this...
But, with the s/sdc3/sdc2 below I think it looks good; so with that change you
have my Acked-by
Regards,
Bjorn
> Signed-off-by: Georgi Djakov <gdjakov@xxxxxxxxxx>
> ---
> .../bindings/pinctrl/qcom,apq8084-pinctrl.txt | 179 ++++++++++++++++++++
> 1 file changed, 179 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
> new file mode 100644
> index 0000000..9d95700
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
> @@ -0,0 +1,179 @@
> +Qualcomm APQ8084 TLMM block
> +
> +This binding describes the Top Level Mode Multiplexer block found in the
> +MSM8960 platform.
> +
> +- compatible:
> + Usage: required
> + Value type: <string>
> + Definition: must be "qcom,apq8084-pinctrl"
> +
> +- reg:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: the base address and size of the TLMM register space.
> +
> +- interrupts:
> + Usage: required
> + Value type: <prop-encoded-array>
> + Definition: should specify the TLMM summary IRQ.
> +
> +- interrupt-controller:
> + Usage: required
> + Value type: <none>
> + Definition: identifies this node as an interrupt controller
> +
> +- #interrupt-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 2. Specifying the pin number and flags, as defined
> + in <dt-bindings/interrupt-controller/irq.h>
> +
> +- gpio-controller:
> + Usage: required
> + Value type: <none>
> + Definition: identifies this node as a gpio controller
> +
> +- #gpio-cells:
> + Usage: required
> + Value type: <u32>
> + Definition: must be 2. Specifying the pin number and flags, as defined
> + in <dt-bindings/gpio/gpio.h>
> +
> +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
> +a general description of GPIO and interrupt bindings.
> +
> +Please refer to pinctrl-bindings.txt in this directory for details of the
> +common pinctrl bindings used by client devices, including the meaning of the
> +phrase "pin configuration node".
> +
> +The pin configuration nodes act as a container for an abitrary number of
> +subnodes. Each of these subnodes represents some desired configuration for a
> +pin, a group, or a list of pins or groups. This configuration can include the
> +mux function to select on those pin(s)/group(s), and various pin configuration
> +parameters, such as pull-up, drive strength, etc.
> +
> +
> +PIN CONFIGURATION NODES:
> +
> +The name of each subnode is not important; all subnodes should be enumerated
> +and processed purely based on their content.
> +
> +Each subnode only affects those parameters that are explicitly listed. In
> +other words, a subnode that lists a mux function but no pin configuration
> +parameters implies no information about any pin configuration parameters.
> +Similarly, a pin subnode that describes a pullup parameter implies no
> +information about e.g. the mux function.
> +
> +
> +The following generic properties as defined in pinctrl-bindings.txt are valid
> +to specify in a pin configuration subnode:
> +
> +- pins:
> + Usage: required
> + Value type: <string-array>
> + Definition: List of gpio pins affected by the properties specified in
> + this subnode. Valid pins are:
> + gpio0-gpio146,
> + sdc1_clk,
> + sdc1_cmd,
> + sdc1_data
> + sdc3_clk,
> + sdc3_cmd,
> + sdc3_data
These are supposed to be sdc2.
> +
> +- function:
> + Usage: required
> + Value type: <string>
> + Definition: Specify the alternative function to be configured for the
> + specified pins. Functions are only valid for gpio pins.
> + Valid values are:
> + adsp_ext, audio_ref, blsp_i2c1, blsp_i2c2, blsp_i2c3,
> + blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, blsp_i2c8,
> + blsp_i2c9, blsp_i2c10, blsp_i2c11, blsp_i2c12,
> + blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, blsp_spi5,
> + blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, blsp_spi10,
> + blsp_spi11, blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3,
> + blsp_uart4, blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8,
> + blsp_uart9, blsp_uart10, blsp_uart11, blsp_uart12,
> + blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5,
> + blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10,
> + blsp_uim11, blsp_uim12, cam_mclk0, cam_mclk1, cam_mclk2,
> + cam_mclk3, cci_async, cci_async_in0, cci_i2c0, cci_i2c1,
> + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
> + edp_hpd, gcc_gp1, gcc_gp2, gcc_gp3, gcc_obt, gcc_vtt,i
> + gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, gp1_clk, gpio,
> + hdmi_cec, hdmi_ddc, hdmi_dtest, hdmi_hpd, hdmi_rcv, hsic,
> + ldo_en, ldo_update, mdp_vsync, pci_e0, pci_e0_n, pci_e0_rst,
> + pci_e1, pci_e1_rst, pci_e1_rst_n, pci_e1_clkreq_n, pri_mi2s,
> + qua_mi2s, sata_act, sata_devsleep, sata_devsleep_n,
> + sd_write, sdc_emmc_mode, sdc3, sdc4, sec_mi2s, slimbus,
> + spdif_tx, spkr_i2s, spkr_i2s_ws, spss_geni, ter_mi2s, tsif1,
> + tsif2, uim, uim_batt_alarm
> +
> +- bias-disable:
> + Usage: optional
> + Value type: <none>
> + Definition: The specified pins should be configued as no pull.
> +
> +- bias-pull-down:
> + Usage: optional
> + Value type: <none>
> + Definition: The specified pins should be configued as pull down.
> +
> +- bias-pull-up:
> + Usage: optional
> + Value type: <none>
> + Definition: The specified pins should be configued as pull up.
> +
> +- output-high:
> + Usage: optional
> + Value type: <none>
> + Definition: The specified pins are configured in output mode, driven
> + high.
> + Not valid for sdc pins.
> +
> +- output-low:
> + Usage: optional
> + Value type: <none>
> + Definition: The specified pins are configured in output mode, driven
> + low.
> + Not valid for sdc pins.
> +
> +- drive-strength:
> + Usage: optional
> + Value type: <u32>
> + Definition: Selects the drive strength for the specified pins, in mA.
> + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
> +
> +Example:
> +
> + tlmm: pinctrl@fd510000 {
> + compatible = "qcom,apq8084-pinctrl";
> + reg = <0xfd510000 0x4000>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 208 0>;
> +
> + uart2: uart2-default {
"uart2" might be a little bit too generic name of a label here, but it is after
all just an example...
> + mux {
> + pins = "gpio4", "gpio5";
> + function = "blsp_uart2";
> + };
> +
> + tx {
> + pins = "gpio4";
> + drive-strength = <4>;
> + bias-disable;
> + };
> +
> + rx {
> + pins = "gpio5";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> + };
> + };
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
