On Sep 2, 2014, at 10:40 AM, Georgi Djakov <gdjakov@xxxxxxxxxx> wrote: > Add basic support for the IFC6540 single-board computer boards, that are > based on the APQ8084 SoC. The first patch adds the initial device tree. > The second enables the serial console. The third adds the SDHC nodes and > enables the eMMC. > > Should go through the qcom/arm-soc tree. > > Changes since v1: > - This time add linux-arm-msm list to the CC. > - Include a third patch for enabling the eMMC. > > Georgi Djakov (3): > ARM: dts: qcom: Add initial IFC6540 board device tree > ARM: dts: qcom: Enable serial port on IFC6540 boards > ARM: dts: qcom: Add SDHC nodes for APQ8084 platform > > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 23 +++++++++++++++++++++++ > arch/arm/boot/dts/qcom-apq8084.dtsi | 23 +++++++++++++++++++++++ > 3 files changed, 47 insertions(+) > create mode 100644 arch/arm/boot/dts/qcom-apq8084-ifc6540.dts > > -- > 1.7.9.5 > Thanks, there is really no reason for these to be 3 patches, can you squash them down into one. - k -- Employee of Qualcomm Innovation Center, Inc. Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
