Re: [PATCH v2 1/2] media: dt-bindings: media: i2c: Add MT9M114 camera sensor binding

[Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>]

Hi Laurent,

On Mon, Feb 07, 2022 at 03:20:54AM +0200, Laurent Pinchart wrote:
> Add device tree binding for the onsemi MT9M114 CMOS camera sensor.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> Changes since v1:
> 
> - Use graph schema
> - Drop unneeded properties
> - Rename ON Semiconductor to onsemi
> ---
>  .../bindings/media/i2c/onnn,mt9m114.yaml      | 110 ++++++++++++++++++
>  MAINTAINERS                                   |   7 ++
>  2 files changed, 117 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> new file mode 100644
> index 000000000000..55b67833f9a1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: onsemi 1/6-inch 720p CMOS Digital Image Sensor
> +
> +maintainers:
> +  - Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> +
> +description: |-
> +  The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor
> +  with an active pixel-array size of 1296H x 976V. It is programmable through
> +  an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI
> +  CSI-2 connection.
> +
> +properties:
> +  compatible:
> +    const: onnn,mt9m114
> +
> +  reg:
> +    description: I2C device address
> +    enum:
> +      - 0x48
> +      - 0x5d
> +
> +  clocks:
> +    description: EXTCLK clock signal
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description:
> +      Core digital voltage supply, 1.8V
> +
> +  vddio-supply:
> +    description:
> +      I/O digital voltage supply, 1.8V or 2.8V
> +
> +  vaa-supply:
> +    description:
> +      Analog voltage supply, 2.8V
> +
> +  reset-gpios:
> +    description: |-
> +      Reference to the GPIO connected to the RESET_BAR pin, if any (active
> +      low).
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    additionalProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        additionalProperties: false
> +
> +        properties:
> +          bus-type:
> +            enum: [4, 5, 6]

With bus-type 5, shouldn't you have the parallel interface sync signal
polarity properties? Possibly also others if the hardware supports them.

> +
> +          remote-endpoint: true
> +
> +          # The number and mapping of lanes (for CSI-2), and the bus width and
> +          # signal polarities (for parallel and BT.656) are fixed and must not
> +          # be specified.
> +
> +        required:
> +          - bus-type
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - vdd-supply
> +  - vddio-supply
> +  - vaa-supply
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c0 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        sensor@48 {
> +            compatible = "onnn,mt9m114";
> +            reg = <0x48>;
> +
> +            clocks = <&clk24m 0>;
> +
> +            reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
> +
> +            vddio-supply = <&reg_cam_1v8>;
> +            vdd-supply = <&reg_cam_1v8>;
> +            vaa-supply = <&reg_2p8v>;
> +
> +            port {
> +                endpoint {
> +                    bus-type = <4>;
> +                    remote-endpoint = <&mipi_csi_in>;
> +                };
> +            };
> +        };
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index f41088418aae..e9919a359c12 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13096,6 +13096,13 @@ T:	git git://linuxtv.org/media_tree.git
>  F:	drivers/media/i2c/mt9m032.c
>  F:	include/media/i2c/mt9m032.h
>  
> +MT9M114 ONSEMI SENSOR DRIVER
> +M:	Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> +L:	linux-media@xxxxxxxxxxxxxxx
> +S:	Maintained
> +T:	git git://linuxtv.org/media_tree.git
> +F:	Documentation/devicetree/bindings/media/i2c.onnn,mt9m114.yaml
> +
>  MT9P031 APTINA CAMERA SENSOR
>  M:	Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
>  L:	linux-media@xxxxxxxxxxxxxxx

-- 
Regards,

Sakari Ailus