From: Baruch Siach <baruch.siach@xxxxxxxxx>
DT binding for the PWM block in Qualcomm IPQ6018 SoC.
Signed-off-by: Baruch Siach <baruch.siach@xxxxxxxxx>
---
This series does not convert the TCSR binding documentation to YAML. As
a result, this commit adds a new dt_binding_check warning:
/example-0/syscon@1937000: failed to match any schema with compatible: ['qcom,tcsr-ipq 6018', 'syscon', 'simple-mfd']
If that is a blocker to IPQ6018 PWM support, so be it. Patches will wait
for someone else to push them further.
v10:
No change
v9:
Add 'ranges' property to example (Rob)
Drop label in example (Rob)
v8:
Add size cell to 'reg' (Rob)
v7:
Use 'reg' instead of 'offset' (Rob)
Drop 'clock-names' and 'assigned-clock*' (Bjorn)
Use single cell address/size in example node (Bjorn)
Move '#pwm-cells' lower in example node (Bjorn)
List 'reg' as required
v6:
Device node is child of TCSR; remove phandle (Rob Herring)
Add assigned-clocks/assigned-clock-rates (Uwe Kleine-König)
v5: Use qcom,pwm-regs for phandle instead of direct regs (Bjorn
Andersson, Kathiravan T)
v4: Update the binding example node as well (Rob Herring's bot)
v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
v2: Make #pwm-cells const (Rob Herring)
---
.../devicetree/bindings/pwm/ipq-pwm.yaml | 53 +++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
diff --git a/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
new file mode 100644
index 000000000000..857086ad539e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/ipq-pwm.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/ipq-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ6018 PWM controller
+
+maintainers:
+ - Baruch Siach <baruch@xxxxxxxxxx>
+
+properties:
+ "#pwm-cells":
+ const: 2
+
+ compatible:
+ const: qcom,ipq6018-pwm
+
+ reg:
+ description: Offset of PWM register in the TCSR block.
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - "#pwm-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
+
+ syscon@1937000 {
+ compatible = "qcom,tcsr-ipq6018", "syscon", "simple-mfd";
+ reg = <0x01937000 0x21000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1937000 0x21000>;
+
+ pwm: pwm@a010 {
+ compatible = "qcom,ipq6018-pwm";
+ reg = <0xa010 0x20>;
+ clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clocks = <&gcc GCC_ADSS_PWM_CLK>;
+ assigned-clock-rates = <100000000>;
+ #pwm-cells = <2>;
+ };
+ };
--
2.34.1
