From: Franck LENORMAND <franck.lenormand@xxxxxxx>
i.MX8/8X SECO firmware IPC is an implementation of passing messages.
But current imx-mailbox driver only support one word message,
i.MX8/8X linux side firmware has to request four TX, four RX and a
TXDB to support IPC to SECO firmware. This is low efficent and
more interrupts triggered compared with one TX and one RX.
To make SECO MU work,
- parse the size of msg.
- Only enable TR0/RR0 interrupt for transmit/receive message.
- For TX/RX, only support one TX channel and one RX channel
- For RX, support receive msg of any size, limited by hardcoded value
of 30.
Signed-off-by: Franck LENORMAND <franck.lenormand@xxxxxxx>
Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
drivers/mailbox/imx-mailbox.c | 213 +++++++++++++++++++++++++++++++++-
1 file changed, 212 insertions(+), 1 deletion(-)
diff --git a/drivers/mailbox/imx-mailbox.c b/drivers/mailbox/imx-mailbox.c
index 399e12671bad..cd011ca5707e 100644
--- a/drivers/mailbox/imx-mailbox.c
+++ b/drivers/mailbox/imx-mailbox.c
@@ -9,6 +9,7 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
+#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/mailbox_controller.h>
#include <linux/module.h>
@@ -24,6 +25,9 @@
#define IMX_MU_S4_CHANS 2
#define IMX_MU_CHAN_NAME_SIZE 20
+#define IMX_MU_SECO_TX_TOUT (msecs_to_jiffies(3000))
+#define IMX_MU_SECO_RX_TOUT (msecs_to_jiffies(3000))
+
enum imx_mu_chan_type {
IMX_MU_TYPE_TX, /* Tx */
IMX_MU_TYPE_RX, /* Rx */
@@ -48,7 +52,7 @@ enum imx_mu_xsr {
struct imx_sc_rpc_msg_max {
struct imx_sc_rpc_msg hdr;
- u32 data[7];
+ u32 data[30];
};
struct imx_s4_rpc_msg_max {
@@ -131,6 +135,55 @@ static u32 imx_mu_read(struct imx_mu_priv *priv, u32 offs)
return ioread32(priv->base + offs);
}
+static int imx_mu_tx_waiting_write(struct imx_mu_priv *priv, u32 val, u32 idx)
+{
+ u64 timeout_time = get_jiffies_64() + IMX_MU_SECO_TX_TOUT;
+ u32 status;
+ u32 can_write;
+
+ dev_dbg(priv->dev, "Trying to write %.8x to idx %d\n", val, idx);
+
+ do {
+ status = imx_mu_read(priv, priv->dcfg->xSR[IMX_MU_TSR]);
+ can_write = status & IMX_MU_xSR_TEn(priv->dcfg->type, idx % 4);
+ } while (!can_write && time_is_after_jiffies64(timeout_time));
+
+ if (!can_write) {
+ dev_err(priv->dev, "timeout trying to write %.8x at %d(%.8x)\n",
+ val, idx, status);
+ return -ETIME;
+ }
+
+ imx_mu_write(priv, val, priv->dcfg->xTR + (idx % 4) * 4);
+
+ return 0;
+}
+
+static int imx_mu_rx_waiting_read(struct imx_mu_priv *priv, u32 *val, u32 idx)
+{
+ u64 timeout_time = get_jiffies_64() + IMX_MU_SECO_RX_TOUT;
+ u32 status;
+ u32 can_read;
+
+ dev_dbg(priv->dev, "Trying to read from idx %d\n", idx);
+
+ do {
+ status = imx_mu_read(priv, priv->dcfg->xSR[IMX_MU_RSR]);
+ can_read = status & IMX_MU_xSR_RFn(priv->dcfg->type, idx % 4);
+ } while (!can_read && time_is_after_jiffies64(timeout_time));
+
+ if (!can_read) {
+ dev_err(priv->dev, "timeout trying to read idx %d (%.8x)\n",
+ idx, status);
+ return -ETIME;
+ }
+
+ *val = imx_mu_read(priv, priv->dcfg->xRR + (idx % 4) * 4);
+ dev_dbg(priv->dev, "Read %.8x\n", *val);
+
+ return 0;
+}
+
static u32 imx_mu_xcr_rmw(struct imx_mu_priv *priv, enum imx_mu_xcr type, u32 set, u32 clr)
{
unsigned long flags;
@@ -289,6 +342,125 @@ static int imx_mu_specific_rx(struct imx_mu_priv *priv, struct imx_mu_con_priv *
return 0;
}
+static int imx_mu_seco_tx(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp,
+ void *data)
+{
+ struct imx_sc_rpc_msg_max *msg = data;
+ u32 *arg = data;
+ u32 byte_size;
+ int err;
+ int i;
+
+ dev_dbg(priv->dev, "Sending message\n");
+
+ switch (cp->type) {
+ case IMX_MU_TYPE_TXDB:
+ byte_size = msg->hdr.size * sizeof(u32);
+ if (byte_size > sizeof(*msg)) {
+ /*
+ * The real message size can be different to
+ * struct imx_sc_rpc_msg_max size
+ */
+ dev_err(priv->dev,
+ "Exceed max msg size (%zu) on TX, got: %i\n",
+ sizeof(*msg), byte_size);
+ return -EINVAL;
+ }
+
+ print_hex_dump_debug("from client ", DUMP_PREFIX_OFFSET, 4, 4,
+ data, byte_size, false);
+
+ /* Send first word */
+ dev_dbg(priv->dev, "Sending header\n");
+ imx_mu_write(priv, *arg++, priv->dcfg->xTR);
+
+ /* Send signaling */
+ dev_dbg(priv->dev, "Sending signaling\n");
+ imx_mu_xcr_rmw(priv, IMX_MU_GCR,
+ IMX_MU_xCR_GIRn(priv->dcfg->type, cp->idx), 0);
+
+ /* Send words to fill the mailbox */
+ for (i = 1; i < 4 && i < msg->hdr.size; i++) {
+ dev_dbg(priv->dev, "Sending word %d\n", i);
+ imx_mu_write(priv, *arg++,
+ priv->dcfg->xTR + (i % 4) * 4);
+ }
+
+ /* Send rest of message waiting for remote read */
+ for (; i < msg->hdr.size; i++) {
+ dev_dbg(priv->dev, "Sending word %d\n", i);
+ err = imx_mu_tx_waiting_write(priv, *arg++, i);
+ if (err) {
+ dev_err(priv->dev, "Timeout tx %d\n", i);
+ return err;
+ }
+ }
+
+ /* Simulate hack for mbox framework */
+ tasklet_schedule(&cp->txdb_tasklet);
+
+ break;
+ default:
+ dev_warn_ratelimited(priv->dev,
+ "Send data on wrong channel type: %d\n",
+ cp->type);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int imx_mu_seco_rxdb(struct imx_mu_priv *priv, struct imx_mu_con_priv *cp)
+{
+ struct imx_sc_rpc_msg_max msg;
+ u32 *data = (u32 *)&msg;
+ u32 byte_size;
+ int err = 0;
+ int i;
+
+ dev_dbg(priv->dev, "Receiving message\n");
+
+ /* Read header */
+ dev_dbg(priv->dev, "Receiving header\n");
+ *data++ = imx_mu_read(priv, priv->dcfg->xRR);
+ byte_size = msg.hdr.size * sizeof(u32);
+ if (byte_size > sizeof(msg)) {
+ dev_err(priv->dev, "Exceed max msg size (%zu) on RX, got: %i\n",
+ sizeof(msg), byte_size);
+ err = -EINVAL;
+ goto error;
+ }
+
+ /* Read message waiting they are written */
+ for (i = 1; i < msg.hdr.size; i++) {
+ dev_dbg(priv->dev, "Receiving word %d\n", i);
+ err = imx_mu_rx_waiting_read(priv, data++, i);
+ if (err) {
+ dev_err(priv->dev, "Timeout rx %d\n", i);
+ goto error;
+ }
+ }
+
+ /* Clear GIP */
+ imx_mu_write(priv, IMX_MU_xSR_GIPn(priv->dcfg->type, cp->idx),
+ priv->dcfg->xSR[IMX_MU_GSR]);
+
+ print_hex_dump_debug("to client ", DUMP_PREFIX_OFFSET, 4, 4,
+ &msg, byte_size, false);
+
+ /* send data to client */
+ dev_dbg(priv->dev, "Sending message to client\n");
+ mbox_chan_received_data(cp->chan, (void *)&msg);
+
+ goto exit;
+
+error:
+ mbox_chan_received_data(cp->chan, ERR_PTR(err));
+
+exit:
+ return err;
+}
+
static void imx_mu_txdb_tasklet(unsigned long data)
{
struct imx_mu_con_priv *cp = (struct imx_mu_con_priv *)data;
@@ -494,6 +666,27 @@ static struct mbox_chan * imx_mu_xlate(struct mbox_controller *mbox,
return &mbox->chans[chan];
}
+static struct mbox_chan *imx_mu_seco_xlate(struct mbox_controller *mbox,
+ const struct of_phandle_args *sp)
+{
+ u32 type;
+
+ if (sp->args_count < 1) {
+ dev_err(mbox->dev, "Invalid argument count %d\n", sp->args_count);
+ return ERR_PTR(-EINVAL);
+ }
+
+ type = sp->args[0]; /* channel type */
+
+ /* Only supports TXDB and RXDB */
+ if (type == IMX_MU_TYPE_TX || type == IMX_MU_TYPE_RX) {
+ dev_err(mbox->dev, "Invalid type: %d\n", type);
+ return ERR_PTR(-EINVAL);
+ }
+
+ return imx_mu_xlate(mbox, sp);
+}
+
static void imx_mu_init_generic(struct imx_mu_priv *priv)
{
unsigned int i;
@@ -544,6 +737,12 @@ static void imx_mu_init_specific(struct imx_mu_priv *priv)
imx_mu_write(priv, 0, priv->dcfg->xCR[i]);
}
+static void imx_mu_init_seco(struct imx_mu_priv *priv)
+{
+ imx_mu_init_generic(priv);
+ priv->mbox.of_xlate = imx_mu_seco_xlate;
+}
+
static int imx_mu_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -702,12 +901,24 @@ static const struct imx_mu_dcfg imx_mu_cfg_imx8_scu = {
.xCR = {0x24, 0x24, 0x24, 0x24},
};
+static const struct imx_mu_dcfg imx_mu_cfg_imx8_seco = {
+ .tx = imx_mu_seco_tx,
+ .rx = imx_mu_generic_rx,
+ .rxdb = imx_mu_seco_rxdb,
+ .init = imx_mu_init_seco,
+ .xTR = 0x0,
+ .xRR = 0x10,
+ .xSR = {0x20, 0x20, 0x20, 0x20},
+ .xCR = {0x24, 0x24, 0x24, 0x24},
+};
+
static const struct of_device_id imx_mu_dt_ids[] = {
{ .compatible = "fsl,imx7ulp-mu", .data = &imx_mu_cfg_imx7ulp },
{ .compatible = "fsl,imx6sx-mu", .data = &imx_mu_cfg_imx6sx },
{ .compatible = "fsl,imx8ulp-mu", .data = &imx_mu_cfg_imx8ulp },
{ .compatible = "fsl,imx8ulp-mu-s4", .data = &imx_mu_cfg_imx8ulp_s4 },
{ .compatible = "fsl,imx8-mu-scu", .data = &imx_mu_cfg_imx8_scu },
+ { .compatible = "fsl,imx8-mu-seco", .data = &imx_mu_cfg_imx8_seco },
{ },
};
MODULE_DEVICE_TABLE(of, imx_mu_dt_ids);
--
2.25.1
