The EPDC can process some dirty rectangles at a time, pick them up and
forward them to the controller. Only processes not involving PXP are
supported at the moment. Due to that and to work with more waveforms,
there is some masking/shifting done. It was tested with the factory
waveforms of Kobo Clara HD, Tolino Shine 3, and Tolino Shine 2HD.
Also the waveform called epdc_E060SCM.fw from NXP BSP works with the
i.MX6SL devices.
Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
---
drivers/gpu/drm/mxc-epdc/Makefile | 2 +-
drivers/gpu/drm/mxc-epdc/epdc_hw.c | 2 +
drivers/gpu/drm/mxc-epdc/epdc_update.c | 1210 +++++++++++++++++++++++
drivers/gpu/drm/mxc-epdc/epdc_update.h | 9 +
drivers/gpu/drm/mxc-epdc/mxc_epdc.h | 50 +
drivers/gpu/drm/mxc-epdc/mxc_epdc_drv.c | 33 +-
6 files changed, 1304 insertions(+), 2 deletions(-)
create mode 100644 drivers/gpu/drm/mxc-epdc/epdc_update.c
create mode 100644 drivers/gpu/drm/mxc-epdc/epdc_update.h
diff --git a/drivers/gpu/drm/mxc-epdc/Makefile b/drivers/gpu/drm/mxc-epdc/Makefile
index 0263ef2bf0db..a55e2bfe824a 100644
--- a/drivers/gpu/drm/mxc-epdc/Makefile
+++ b/drivers/gpu/drm/mxc-epdc/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-mxc_epdc_drm-y := mxc_epdc_drv.o epdc_hw.o epdc_waveform.o
+mxc_epdc_drm-y := mxc_epdc_drv.o epdc_hw.o epdc_update.o epdc_waveform.o
obj-$(CONFIG_DRM_MXC_EPDC) += mxc_epdc_drm.o
diff --git a/drivers/gpu/drm/mxc-epdc/epdc_hw.c b/drivers/gpu/drm/mxc-epdc/epdc_hw.c
index a74cbd237e0d..22a065ac6992 100644
--- a/drivers/gpu/drm/mxc-epdc/epdc_hw.c
+++ b/drivers/gpu/drm/mxc-epdc/epdc_hw.c
@@ -20,6 +20,7 @@
#include "mxc_epdc.h"
#include "epdc_regs.h"
#include "epdc_hw.h"
+#include "epdc_update.h"
#include "epdc_waveform.h"
void mxc_epdc_powerup(struct mxc_epdc *priv)
@@ -410,6 +411,7 @@ void mxc_epdc_init_sequence(struct mxc_epdc *priv, struct drm_display_mode *m)
priv->in_init = true;
mxc_epdc_powerup(priv);
+ mxc_epdc_draw_mode0(priv);
/* Force power down event */
priv->powering_down = true;
mxc_epdc_powerdown(priv);
diff --git a/drivers/gpu/drm/mxc-epdc/epdc_update.c b/drivers/gpu/drm/mxc-epdc/epdc_update.c
new file mode 100644
index 000000000000..0c061982aa0b
--- /dev/null
+++ b/drivers/gpu/drm/mxc-epdc/epdc_update.c
@@ -0,0 +1,1210 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2022 Andreas Kemnade
+//
+/*
+ * based on the EPDC framebuffer driver
+ * Copyright (C) 2010-2016 Freescale Semiconductor, Inc.
+ * Copyright 2017 NXP
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include "mxc_epdc.h"
+#include "epdc_hw.h"
+#include "epdc_regs.h"
+#include "epdc_waveform.h"
+
+#define EPDC_V2_NUM_LUTS 64
+#define EPDC_V2_MAX_NUM_UPDATES 64
+#define INVALID_LUT (-1)
+#define DRY_RUN_NO_LUT 100
+
+#define MERGE_OK 0
+#define MERGE_FAIL 1
+#define MERGE_BLOCK 2
+
+struct update_desc_list {
+ struct list_head list;
+ struct mxcfb_update_data upd_data;/* Update parameters */
+ u32 update_order; /* Numeric ordering value for update */
+};
+
+/* This structure represents a list node containing both
+ * a memory region allocated as an output buffer for the PxP
+ * update processing task, and the update description (mode, region, etc.)
+ */
+struct update_data_list {
+ struct list_head list;
+ struct update_desc_list *update_desc;
+ int lut_num; /* Assigned before update is processed into working buffer */
+ u64 collision_mask; /* Set when update creates collision */
+ /* Mask of the LUTs the update collides with */
+};
+
+/********************************************************
+ * Start Low-Level EPDC Functions
+ ********************************************************/
+
+static inline void epdc_lut_complete_intr(struct mxc_epdc *priv, u32 lut_num, bool enable)
+{
+ if (enable) {
+ if (lut_num < 32)
+ epdc_write(priv, EPDC_IRQ_MASK1_SET, BIT(lut_num));
+ else
+ epdc_write(priv, EPDC_IRQ_MASK2_SET, BIT(lut_num - 32));
+ } else {
+ if (lut_num < 32)
+ epdc_write(priv, EPDC_IRQ_MASK1_CLEAR, BIT(lut_num));
+ else
+ epdc_write(priv, EPDC_IRQ_MASK2_CLEAR, BIT(lut_num - 32));
+ }
+}
+
+static inline void epdc_working_buf_intr(struct mxc_epdc *priv, bool enable)
+{
+ if (enable)
+ epdc_write(priv, EPDC_IRQ_MASK_SET, EPDC_IRQ_WB_CMPLT_IRQ);
+ else
+ epdc_write(priv, EPDC_IRQ_MASK_CLEAR, EPDC_IRQ_WB_CMPLT_IRQ);
+}
+
+static inline void epdc_clear_working_buf_irq(struct mxc_epdc *priv)
+{
+ epdc_write(priv, EPDC_IRQ_CLEAR,
+ EPDC_IRQ_WB_CMPLT_IRQ | EPDC_IRQ_LUT_COL_IRQ);
+}
+
+static inline void epdc_eof_intr(struct mxc_epdc *priv, bool enable)
+{
+ if (enable)
+ epdc_write(priv, EPDC_IRQ_MASK_SET, EPDC_IRQ_FRAME_END_IRQ);
+ else
+ epdc_write(priv, EPDC_IRQ_MASK_CLEAR, EPDC_IRQ_FRAME_END_IRQ);
+}
+
+static inline void epdc_clear_eof_irq(struct mxc_epdc *priv)
+{
+ epdc_write(priv, EPDC_IRQ_CLEAR, EPDC_IRQ_FRAME_END_IRQ);
+}
+
+static inline bool epdc_signal_eof(struct mxc_epdc *priv)
+{
+ return (epdc_read(priv, EPDC_IRQ_MASK) & epdc_read(priv, EPDC_IRQ)
+ & EPDC_IRQ_FRAME_END_IRQ) ? true : false;
+}
+
+
+static void epdc_set_update_area(struct mxc_epdc *priv, u32 addr,
+ u32 x, u32 y, u32 width, u32 height,
+ u32 stride)
+{
+ u32 val;
+
+ epdc_write(priv, EPDC_UPD_ADDR, addr);
+ val = (y << EPDC_UPD_CORD_YCORD_OFFSET) | x;
+ epdc_write(priv, EPDC_UPD_CORD, val);
+ val = (height << EPDC_UPD_SIZE_HEIGHT_OFFSET) | width;
+ epdc_write(priv, EPDC_UPD_SIZE, val);
+ epdc_write(priv, EPDC_UPD_STRIDE, stride);
+}
+
+static bool is_free_list_full(struct mxc_epdc *priv)
+{
+ int count = 0;
+ struct update_data_list *plist;
+
+ /* Count buffers in free buffer list */
+ list_for_each_entry(plist, &priv->upd_buf_free_list, list)
+ count++;
+
+ /* Check to see if all buffers are in this list */
+ return (count == priv->max_num_updates);
+}
+
+static inline bool epdc_is_lut_complete(struct mxc_epdc *priv, u32 lut_num)
+{
+ u32 val;
+ bool is_compl;
+
+ if (lut_num < 32) {
+ val = epdc_read(priv, EPDC_IRQ1);
+ is_compl = val & BIT(lut_num) ? true : false;
+ } else {
+ val = epdc_read(priv, EPDC_IRQ2);
+ is_compl = val & BIT(lut_num - 32) ? true : false;
+ }
+
+ return is_compl;
+}
+static inline void epdc_clear_lut_complete_irq(struct mxc_epdc *priv, u32 lut_num)
+{
+ if (lut_num < 32)
+ epdc_write(priv, EPDC_IRQ1_CLEAR, BIT(lut_num));
+ else
+ epdc_write(priv, EPDC_IRQ2_CLEAR, BIT(lut_num - 32));
+}
+
+static inline bool epdc_is_working_buffer_busy(struct mxc_epdc *priv)
+{
+ u32 val = epdc_read(priv, EPDC_STATUS);
+ bool is_busy = (val & EPDC_STATUS_WB_BUSY) ? true : false;
+
+ return is_busy;
+}
+
+static inline bool epdc_is_working_buffer_complete(struct mxc_epdc *priv)
+{
+ u32 val = epdc_read(priv, EPDC_IRQ);
+ bool is_compl = (val & EPDC_IRQ_WB_CMPLT_IRQ) ? true : false;
+
+ return is_compl;
+}
+
+static inline bool epdc_is_lut_cancelled(struct mxc_epdc *priv)
+{
+ u32 val = epdc_read(priv, EPDC_STATUS);
+ bool is_void = (val & EPDC_STATUS_UPD_VOID) ? true : false;
+
+ return is_void;
+}
+
+static inline bool epdc_is_collision(struct mxc_epdc *priv)
+{
+ u32 val = epdc_read(priv, EPDC_IRQ);
+
+ return (val & EPDC_IRQ_LUT_COL_IRQ) ? true : false;
+}
+
+static inline u64 epdc_get_colliding_luts(struct mxc_epdc *priv)
+{
+ u64 val = (u64)(epdc_read(priv, EPDC_STATUS_COL));
+
+ val |= (u64)epdc_read(priv, EPDC_STATUS_COL2) << 32;
+ return val;
+}
+
+static irqreturn_t mxc_epdc_irq_handler(int irq, void *dev_id)
+{
+ struct mxc_epdc *priv = dev_id;
+ u32 ints_fired, luts1_ints_fired, luts2_ints_fired;
+
+ /*
+ * If we just completed one-time panel init, bypass
+ * queue handling, clear interrupt and return
+ */
+ if (priv->in_init) {
+ if (epdc_is_working_buffer_complete(priv)) {
+ epdc_working_buf_intr(priv, false);
+ epdc_clear_working_buf_irq(priv);
+ dev_dbg(priv->drm.dev, "Cleared WB for init update\n");
+ }
+
+ if (epdc_is_lut_complete(priv, 0)) {
+ epdc_lut_complete_intr(priv, 0, false);
+ epdc_clear_lut_complete_irq(priv, 0);
+ priv->in_init = false;
+ dev_dbg(priv->drm.dev, "Cleared LUT complete for init update\n");
+ }
+
+ return IRQ_HANDLED;
+ }
+
+ ints_fired = epdc_read(priv, EPDC_IRQ_MASK) & epdc_read(priv, EPDC_IRQ);
+
+ luts1_ints_fired = epdc_read(priv, EPDC_IRQ_MASK1) & epdc_read(priv, EPDC_IRQ1);
+ luts2_ints_fired = epdc_read(priv, EPDC_IRQ_MASK2) & epdc_read(priv, EPDC_IRQ2);
+
+ if (!(ints_fired || luts1_ints_fired || luts2_ints_fired))
+ return IRQ_HANDLED;
+
+ if (epdc_read(priv, EPDC_IRQ) & EPDC_IRQ_TCE_UNDERRUN_IRQ) {
+ dev_err(priv->drm.dev,
+ "TCE underrun! Will continue to update panel\n");
+ /* Clear TCE underrun IRQ */
+ epdc_write(priv, EPDC_IRQ_CLEAR, EPDC_IRQ_TCE_UNDERRUN_IRQ);
+ }
+
+ /* Check if we are waiting on EOF to sync a new update submission */
+ if (epdc_signal_eof(priv)) {
+ epdc_eof_intr(priv, false);
+ epdc_clear_eof_irq(priv);
+ }
+
+ /*
+ * Workaround for EPDC v2.0/v2.1 errata: Must read collision status
+ * before clearing IRQ, or else collision status for bits 16:63
+ * will be automatically cleared. So we read it here, and there is
+ * no conflict with using it in epdc_intr_work_func since the
+ * working buffer processing flow is strictly sequential (i.e.,
+ * only one WB processing done at a time, so the data grabbed
+ * here should be up-to-date and accurate when the WB processing
+ * completes. Also, note that there is no impact to other versions
+ * of EPDC by reading LUT status here.
+ */
+ if (priv->cur_update != NULL)
+ priv->epdc_colliding_luts = epdc_get_colliding_luts(priv);
+
+ /* Clear the interrupt mask for any interrupts signalled */
+ epdc_write(priv, EPDC_IRQ_MASK_CLEAR, ints_fired);
+ epdc_write(priv, EPDC_IRQ_MASK1_CLEAR, luts1_ints_fired);
+ epdc_write(priv, EPDC_IRQ_MASK2_CLEAR, luts2_ints_fired);
+
+ dev_dbg(priv->drm.dev,
+ "EPDC interrupts fired = 0x%x, LUTS1 fired = 0x%x, LUTS2 fired = 0x%x\n",
+ ints_fired, luts1_ints_fired, luts2_ints_fired);
+
+ queue_work(priv->epdc_intr_workqueue,
+ &priv->epdc_intr_work);
+
+
+ return IRQ_HANDLED;
+}
+
+static void cleanup_update_list(void *data)
+{
+ struct mxc_epdc *priv = (struct mxc_epdc *)data;
+ struct update_data_list *plist, *temp_list;
+
+ list_for_each_entry_safe(plist, temp_list, &priv->upd_buf_free_list,
+ list) {
+ list_del(&plist->list);
+ kfree(plist);
+ }
+}
+
+static void epdc_done_work_func(struct work_struct *work)
+{
+ struct mxc_epdc *priv =
+ container_of(work, struct mxc_epdc,
+ epdc_done_work.work);
+ mxc_epdc_powerdown(priv);
+}
+
+static int epdc_submit_merge(struct update_desc_list *upd_desc_list,
+ struct update_desc_list *update_to_merge,
+ struct mxc_epdc *priv)
+{
+ struct mxcfb_update_data *a, *b;
+ struct drm_rect *arect, *brect;
+
+ a = &upd_desc_list->upd_data;
+ b = &update_to_merge->upd_data;
+ arect = &upd_desc_list->upd_data.update_region;
+ brect = &update_to_merge->upd_data.update_region;
+
+ if (a->update_mode != b->update_mode)
+ a->update_mode = UPDATE_MODE_FULL;
+
+ if (a->waveform_mode != b->waveform_mode)
+ a->waveform_mode = WAVEFORM_MODE_AUTO;
+
+ if ((arect->x1 > brect->x2) ||
+ (brect->x1 > arect->x2) ||
+ (arect->y1 > brect->y2) ||
+ (brect->y1 > arect->y2))
+ return MERGE_FAIL;
+
+ arect->x1 = min(arect->x1, brect->x1);
+ arect->x2 = max(arect->x2, brect->x2);
+ arect->y1 = min(arect->y1, brect->y1);
+ arect->y2 = max(arect->y2, brect->y2);
+
+ /* Merged update should take on the earliest order */
+ upd_desc_list->update_order = max(upd_desc_list->update_order,
+ update_to_merge->update_order);
+
+ return MERGE_OK;
+}
+
+static void epdc_from_rgb_clear_lower_nibble(struct drm_rect *clip,
+ void *vaddr, int pitch,
+ u8 *dst, int dst_pitch)
+{
+ unsigned int x, y;
+
+ dst += clip->y1 * dst_pitch;
+
+ for (y = clip->y1; y < clip->y2; y++, dst += dst_pitch) {
+ u32 *src;
+
+ src = vaddr + (y * pitch);
+ src += clip->x1;
+ for (x = clip->x1; x < clip->x2; x++) {
+ u8 r = (*src & 0x00ff0000) >> 16;
+ u8 g = (*src & 0x0000ff00) >> 8;
+ u8 b = *src & 0x000000ff;
+
+ /* ITU BT.601: Y = 0.299 R + 0.587 G + 0.114 B */
+ u8 gray = (3 * r + 6 * g + b) / 10;
+
+ /*
+ * done in Tolino 3.0.x kernels via PXP_LUT_AA
+ * needed for 5 bit waveforms
+ */
+
+ dst[x] = gray & 0xF0;
+ src++;
+ }
+ }
+}
+
+/* found by experimentation, reduced number of levels of gray */
+static void epdc_from_rgb_shift(struct drm_rect *clip, void *vaddr, int pitch,
+ u8 *dst, int dst_pitch)
+{
+ unsigned int x, y;
+
+ dst += clip->y1 * dst_pitch;
+
+ for (y = clip->y1; y < clip->y2; y++, dst += dst_pitch) {
+ u32 *src;
+
+ src = vaddr + (y * pitch);
+ src += clip->x1;
+ for (x = clip->x1; x < clip->x2; x++) {
+ u8 r = (*src & 0x00ff0000) >> 16;
+ u8 g = (*src & 0x0000ff00) >> 8;
+ u8 b = *src & 0x000000ff;
+
+ /* ITU BT.601: Y = 0.299 R + 0.587 G + 0.114 B */
+ u8 gray = (3 * r + 6 * g + b) / 10;
+
+ dst[x] = (gray >> 2) | 0xC0;
+ src++;
+ }
+ }
+}
+
+static void epdc_submit_update(struct mxc_epdc *priv,
+ u32 lut_num, u32 waveform_mode, u32 update_mode,
+ bool use_dry_run, bool use_test_mode, u32 np_val)
+{
+ u32 reg_val = 0;
+
+ if (use_test_mode) {
+ reg_val |=
+ ((np_val << EPDC_UPD_FIXED_FIXNP_OFFSET) &
+ EPDC_UPD_FIXED_FIXNP_MASK) | EPDC_UPD_FIXED_FIXNP_EN;
+
+ epdc_write(priv, EPDC_UPD_FIXED, reg_val);
+
+ reg_val = EPDC_UPD_CTRL_USE_FIXED;
+ } else {
+ epdc_write(priv, EPDC_UPD_FIXED, reg_val);
+ }
+
+ if (waveform_mode == WAVEFORM_MODE_AUTO)
+ reg_val |= EPDC_UPD_CTRL_AUTOWV;
+ else
+ reg_val |= ((waveform_mode <<
+ EPDC_UPD_CTRL_WAVEFORM_MODE_OFFSET) &
+ EPDC_UPD_CTRL_WAVEFORM_MODE_MASK);
+
+ reg_val |= (use_dry_run ? EPDC_UPD_CTRL_DRY_RUN : 0) |
+ ((lut_num << EPDC_UPD_CTRL_LUT_SEL_OFFSET) &
+ EPDC_UPD_CTRL_LUT_SEL_MASK) |
+ update_mode;
+ epdc_write(priv, EPDC_UPD_CTRL, reg_val);
+}
+
+static inline bool epdc_is_lut_active(struct mxc_epdc *priv, u32 lut_num)
+{
+ u32 val;
+ bool is_active;
+
+ if (lut_num < 32) {
+ val = epdc_read(priv, EPDC_STATUS_LUTS);
+ is_active = val & BIT(lut_num) ? true : false;
+ } else {
+ val = epdc_read(priv, EPDC_STATUS_LUTS2);
+ is_active = val & BIT(lut_num - 32) ? true : false;
+ }
+
+ return is_active;
+}
+
+static inline bool epdc_any_luts_active(struct mxc_epdc *priv)
+{
+ bool any_active;
+
+ any_active = (epdc_read(priv, EPDC_STATUS_LUTS) |
+ epdc_read(priv, EPDC_STATUS_LUTS2)) ? true : false;
+
+ return any_active;
+}
+
+static inline bool epdc_any_luts_available(struct mxc_epdc *priv)
+{
+ bool luts_available =
+ (epdc_read(priv, EPDC_STATUS_NEXTLUT) &
+ EPDC_STATUS_NEXTLUT_NEXT_LUT_VALID) ? true : false;
+ return luts_available;
+}
+
+static inline int epdc_get_next_lut(struct mxc_epdc *priv)
+{
+ u32 val =
+ epdc_read(priv, EPDC_STATUS_NEXTLUT) &
+ EPDC_STATUS_NEXTLUT_NEXT_LUT_MASK;
+ return val;
+}
+
+static int epdc_choose_next_lut(struct mxc_epdc *priv, int *next_lut)
+{
+ u64 luts_status, unprocessed_luts, used_luts;
+ /* Available LUTs are reduced to 16 in 5-bit waveform mode */
+ bool format_p5n = ((epdc_read(priv, EPDC_FORMAT) &
+ EPDC_FORMAT_BUF_PIXEL_FORMAT_MASK) ==
+ EPDC_FORMAT_BUF_PIXEL_FORMAT_P5N);
+
+ luts_status = epdc_read(priv, EPDC_STATUS_LUTS);
+ if (format_p5n)
+ luts_status &= 0xFFFF;
+ else
+ luts_status |= ((u64)epdc_read(priv, EPDC_STATUS_LUTS2) << 32);
+
+ unprocessed_luts = epdc_read(priv, EPDC_IRQ1) |
+ ((u64)epdc_read(priv, EPDC_IRQ2) << 32);
+ if (format_p5n)
+ unprocessed_luts &= 0xFFFF;
+
+ /*
+ * Note on unprocessed_luts: There is a race condition
+ * where a LUT completes, but has not been processed by
+ * IRQ handler workqueue, and then a new update request
+ * attempts to use that LUT. We prevent that here by
+ * ensuring that the LUT we choose doesn't have its IRQ
+ * bit set (indicating it has completed but not yet been
+ * processed).
+ */
+ used_luts = luts_status | unprocessed_luts;
+
+ if (format_p5n) {
+ *next_lut = fls64(used_luts);
+ if (*next_lut > 15)
+ *next_lut = ffz(used_luts);
+ } else {
+ if ((u32)used_luts != ~0UL)
+ *next_lut = ffz((u32)used_luts);
+ else if ((u32)(used_luts >> 32) != ~0UL)
+ *next_lut = ffz((u32)(used_luts >> 32)) + 32;
+ else
+ *next_lut = INVALID_LUT;
+ }
+
+ if (used_luts & 0x8000)
+ return 1;
+ else
+ return 0;
+}
+
+
+
+
+static void epdc_submit_work_func(struct work_struct *work)
+{
+ struct update_data_list *next_update, *temp_update;
+ struct update_desc_list *next_desc, *temp_desc;
+ struct mxc_epdc *priv =
+ container_of(work, struct mxc_epdc, epdc_submit_work);
+ struct update_data_list *upd_data_list = NULL;
+ struct drm_rect adj_update_region, *upd_region;
+ bool end_merge = false;
+ u32 update_addr;
+ uint8_t *update_addr_virt;
+ int ret;
+
+ /* Protect access to buffer queues and to update HW */
+ mutex_lock(&priv->queue_mutex);
+
+ /*
+ * Are any of our collision updates able to go now?
+ * Go through all updates in the collision list and check to see
+ * if the collision mask has been fully cleared
+ */
+ list_for_each_entry_safe(next_update, temp_update,
+ &priv->upd_buf_collision_list, list) {
+
+ if (next_update->collision_mask != 0)
+ continue;
+
+ dev_dbg(priv->drm.dev, "A collision update is ready to go!\n");
+
+ /* Force waveform mode to auto for resubmitted collisions */
+ next_update->update_desc->upd_data.waveform_mode =
+ WAVEFORM_MODE_AUTO;
+
+ /*
+ * We have a collision cleared, so select it for resubmission.
+ * If an update is already selected, attempt to merge.
+ */
+ if (!upd_data_list) {
+ upd_data_list = next_update;
+ list_del_init(&next_update->list);
+ } else {
+ switch (epdc_submit_merge(upd_data_list->update_desc,
+ next_update->update_desc,
+ priv)) {
+ case MERGE_OK:
+ dev_dbg(priv->drm.dev,
+ "Update merged [collision]\n");
+ list_del_init(&next_update->update_desc->list);
+ kfree(next_update->update_desc);
+ next_update->update_desc = NULL;
+ list_del_init(&next_update->list);
+ /* Add to free buffer list */
+ list_add_tail(&next_update->list,
+ &priv->upd_buf_free_list);
+ break;
+ case MERGE_FAIL:
+ dev_dbg(priv->drm.dev,
+ "Update not merged [collision]\n");
+ break;
+ case MERGE_BLOCK:
+ dev_dbg(priv->drm.dev,
+ "Merge blocked [collision]\n");
+ end_merge = true;
+ break;
+ }
+
+ if (end_merge) {
+ end_merge = false;
+ break;
+ }
+ }
+ }
+
+ /*
+ * If we didn't find a collision update ready to go, we
+ * need to get a free buffer and match it to a pending update.
+ */
+
+ /*
+ * Can't proceed if there are no free buffers (and we don't
+ * already have a collision update selected)
+ */
+ if (!upd_data_list &&
+ list_empty(&priv->upd_buf_free_list)) {
+ mutex_unlock(&priv->queue_mutex);
+ return;
+ }
+
+ list_for_each_entry_safe(next_desc, temp_desc,
+ &priv->upd_pending_list, list) {
+
+ dev_dbg(priv->drm.dev, "Found a pending update!\n");
+
+ if (!upd_data_list) {
+ if (list_empty(&priv->upd_buf_free_list))
+ break;
+ upd_data_list =
+ list_entry(priv->upd_buf_free_list.next,
+ struct update_data_list, list);
+ list_del_init(&upd_data_list->list);
+ upd_data_list->update_desc = next_desc;
+ list_del_init(&next_desc->list);
+ } else {
+ switch (epdc_submit_merge(upd_data_list->update_desc,
+ next_desc, priv)) {
+ case MERGE_OK:
+ dev_dbg(priv->drm.dev,
+ "Update merged [queue]\n");
+ list_del_init(&next_desc->list);
+ kfree(next_desc);
+ break;
+ case MERGE_FAIL:
+ dev_dbg(priv->drm.dev,
+ "Update not merged [queue]\n");
+ break;
+ case MERGE_BLOCK:
+ dev_dbg(priv->drm.dev,
+ "Merge blocked [collision]\n");
+ end_merge = true;
+ break;
+ }
+
+ if (end_merge)
+ break;
+ }
+ }
+
+ /* Is update list empty? */
+ if (!upd_data_list) {
+ mutex_unlock(&priv->queue_mutex);
+ return;
+ }
+
+ if ((!priv->powered)
+ || priv->powering_down)
+ mxc_epdc_powerup(priv);
+
+ /*
+ * Set update buffer pointer to the start of
+ * the update region in the frame buffer.
+ */
+ upd_region = &upd_data_list->update_desc->upd_data.update_region;
+ update_addr = priv->epdc_mem_phys +
+ ((upd_region->y1 * priv->epdc_mem_width) +
+ upd_region->x1);
+ update_addr_virt = (u8 *)(priv->epdc_mem_virt) +
+ ((upd_region->y1 * priv->epdc_mem_width) +
+ upd_region->x1);
+
+ adj_update_region = upd_data_list->update_desc->upd_data.update_region;
+ /*
+ * Is the working buffer idle?
+ * If the working buffer is busy, we must wait for the resource
+ * to become free. The IST will signal this event.
+ */
+ if (priv->cur_update != NULL) {
+ dev_dbg(priv->drm.dev, "working buf busy!\n");
+
+ /* Initialize event signalling an update resource is free */
+ init_completion(&priv->update_res_free);
+
+ priv->waiting_for_wb = true;
+
+ /* Leave spinlock while waiting for WB to complete */
+ mutex_unlock(&priv->queue_mutex);
+ wait_for_completion(&priv->update_res_free);
+ mutex_lock(&priv->queue_mutex);
+ }
+
+ /*
+ * If there are no LUTs available,
+ * then we must wait for the resource to become free.
+ * The IST will signal this event.
+ */
+ if (!epdc_any_luts_available(priv)) {
+ dev_dbg(priv->drm.dev, "no luts available!\n");
+
+ /* Initialize event signalling an update resource is free */
+ init_completion(&priv->update_res_free);
+
+ priv->waiting_for_lut = true;
+
+ /* Leave spinlock while waiting for LUT to free up */
+ mutex_unlock(&priv->queue_mutex);
+ wait_for_completion(&priv->update_res_free);
+ mutex_lock(&priv->queue_mutex);
+ }
+
+ ret = epdc_choose_next_lut(priv, &upd_data_list->lut_num);
+
+ /* LUTs are available, so we get one here */
+ priv->cur_update = upd_data_list;
+
+ /* Reset mask for LUTS that have completed during WB processing */
+ priv->luts_complete_wb = 0;
+
+ /* Mark LUT with order */
+ priv->lut_update_order[upd_data_list->lut_num] =
+ upd_data_list->update_desc->update_order;
+
+ epdc_lut_complete_intr(priv, upd_data_list->lut_num,
+ true);
+
+ /* Enable Collision and WB complete IRQs */
+ epdc_working_buf_intr(priv, true);
+
+ epdc_write(priv, EPDC_TEMP,
+ mxc_epdc_fb_get_temp_index(priv, TEMP_USE_AMBIENT));
+
+ /* Program EPDC update to process buffer */
+
+ epdc_set_update_area(priv, update_addr,
+ adj_update_region.x1, adj_update_region.y1,
+ drm_rect_width(&adj_update_region),
+ drm_rect_height(&adj_update_region),
+ priv->epdc_mem_width);
+
+ if (priv->wv_modes_update &&
+ (upd_data_list->update_desc->upd_data.waveform_mode
+ == WAVEFORM_MODE_AUTO)) {
+ mxc_epdc_set_update_waveform(priv, &priv->wv_modes);
+ priv->wv_modes_update = false;
+ }
+
+ epdc_submit_update(priv, upd_data_list->lut_num,
+ upd_data_list->update_desc->upd_data.waveform_mode,
+ upd_data_list->update_desc->upd_data.update_mode,
+ false,
+ false, 0);
+
+ /* Release buffer queues */
+ mutex_unlock(&priv->queue_mutex);
+}
+
+void mxc_epdc_flush_updates(struct mxc_epdc *priv)
+{
+ int ret;
+
+ if (priv->in_init)
+ return;
+
+ /* Grab queue lock to prevent any new updates from being submitted */
+ mutex_lock(&priv->queue_mutex);
+
+ /*
+ * 3 places to check for updates that are active or pending:
+ * 1) Updates in the pending list
+ * 2) Update buffers in use (e.g., PxP processing)
+ * 3) Active updates to panel - We can key off of EPDC
+ * power state to know if we have active updates.
+ */
+ if (!list_empty(&priv->upd_pending_list) ||
+ !is_free_list_full(priv) ||
+ (priv->updates_active == true)) {
+ /* Initialize event signalling updates are done */
+ init_completion(&priv->updates_done);
+ priv->waiting_for_idle = true;
+
+ mutex_unlock(&priv->queue_mutex);
+ /* Wait for any currently active updates to complete */
+ ret = wait_for_completion_timeout(&priv->updates_done,
+ msecs_to_jiffies(8000));
+ if (!ret)
+ dev_err(priv->drm.dev,
+ "Flush updates timeout! ret = 0x%x\n", ret);
+
+ mutex_lock(&priv->queue_mutex);
+ priv->waiting_for_idle = false;
+ }
+
+ mutex_unlock(&priv->queue_mutex);
+}
+
+void mxc_epdc_draw_mode0(struct mxc_epdc *priv)
+{
+ u32 *upd_buf_ptr;
+ int i;
+ u32 xres, yres;
+
+ upd_buf_ptr = (u32 *)priv->epdc_mem_virt;
+
+ epdc_working_buf_intr(priv, true);
+ epdc_lut_complete_intr(priv, 0, true);
+
+ /* Use unrotated (native) width/height */
+ xres = priv->epdc_mem_width;
+ yres = priv->epdc_mem_height;
+
+ /* Program EPDC update to process buffer */
+ epdc_set_update_area(priv, priv->epdc_mem_phys, 0, 0, xres, yres, 0);
+ epdc_submit_update(priv, 0, priv->wv_modes.mode_init, UPDATE_MODE_FULL,
+ false, true, 0xFF);
+
+ dev_dbg(priv->drm.dev, "Mode0 update - Waiting for LUT to complete...\n");
+
+ /* Will timeout after ~4-5 seconds */
+
+ for (i = 0; i < 40; i++) {
+ if (!epdc_is_lut_active(priv, 0)) {
+ dev_dbg(priv->drm.dev, "Mode0 init complete\n");
+ return;
+ }
+ msleep(100);
+ }
+
+ dev_err(priv->drm.dev, "Mode0 init failed!\n");
+}
+
+
+int mxc_epdc_send_single_update(struct drm_rect *clip, int pitch, void *vaddr,
+ struct mxc_epdc *priv)
+{
+ struct update_desc_list *upd_desc;
+
+ if (priv->rev < 30)
+ epdc_from_rgb_clear_lower_nibble(clip, vaddr, pitch,
+ (u8 *)priv->epdc_mem_virt,
+ priv->epdc_mem_width);
+ else
+ epdc_from_rgb_shift(clip, vaddr, pitch,
+ (u8 *)priv->epdc_mem_virt,
+ priv->epdc_mem_width);
+
+ /* Has EPDC HW been initialized? */
+ if (!priv->hw_ready) {
+ /* Throw message if we are not mid-initialization */
+ if (!priv->hw_initializing)
+ dev_err(priv->drm.dev, "Display HW not properly initialized. Aborting update.\n");
+ return -EPERM;
+ }
+
+ mutex_lock(&priv->queue_mutex);
+
+ if (priv->waiting_for_idle) {
+ dev_dbg(priv->drm.dev, "EPDC not active. Update request abort.\n");
+ mutex_unlock(&priv->queue_mutex);
+ return -EPERM;
+ }
+
+
+ /*
+ * Create new update data structure, fill it with new update
+ * data and add it to the list of pending updates
+ */
+ upd_desc = kzalloc(sizeof(struct update_desc_list), GFP_KERNEL);
+ if (!upd_desc) {
+ mutex_unlock(&priv->queue_mutex);
+ return -ENOMEM;
+ }
+ /* Initialize per-update marker list */
+ upd_desc->upd_data.update_region = *clip;
+ upd_desc->upd_data.waveform_mode = WAVEFORM_MODE_AUTO;
+ upd_desc->upd_data.temp = TEMP_USE_AMBIENT;
+ upd_desc->upd_data.update_mode = UPDATE_MODE_PARTIAL;
+ upd_desc->update_order = priv->order_cnt++;
+ list_add_tail(&upd_desc->list, &priv->upd_pending_list);
+
+ /* Queued update scheme processing */
+
+ mutex_unlock(&priv->queue_mutex);
+
+ /* Signal workqueue to handle new update */
+ queue_work(priv->epdc_submit_workqueue,
+ &priv->epdc_submit_work);
+
+ return 0;
+}
+
+static void epdc_intr_work_func(struct work_struct *work)
+{
+ struct mxc_epdc *priv =
+ container_of(work, struct mxc_epdc, epdc_intr_work);
+ struct update_data_list *collision_update;
+ u64 temp_mask;
+ u32 lut;
+ bool ignore_collision = false;
+ int i;
+ bool wb_lut_done = false;
+ bool free_update = true;
+ u32 epdc_luts_active, epdc_wb_busy, epdc_luts_avail, epdc_lut_cancelled;
+ u32 epdc_collision;
+ u64 epdc_irq_stat;
+ bool epdc_waiting_on_wb;
+ u32 coll_coord, coll_size;
+
+ /* Protect access to buffer queues and to update HW */
+ mutex_lock(&priv->queue_mutex);
+
+ /* Capture EPDC status one time to limit exposure to race conditions */
+ epdc_luts_active = epdc_any_luts_active(priv);
+ epdc_wb_busy = epdc_is_working_buffer_busy(priv);
+ epdc_lut_cancelled = epdc_is_lut_cancelled(priv);
+ epdc_luts_avail = epdc_any_luts_available(priv);
+ epdc_collision = epdc_is_collision(priv);
+
+ epdc_irq_stat = (u64)epdc_read(priv, EPDC_IRQ1) |
+ ((u64)epdc_read(priv, EPDC_IRQ2) << 32);
+ epdc_waiting_on_wb = (priv->cur_update != NULL) ? true : false;
+
+ /* Free any LUTs that have completed */
+ for (i = 0; i < priv->num_luts; i++) {
+ if ((epdc_irq_stat & (1ULL << i)) == 0)
+ continue;
+
+ dev_dbg(priv->drm.dev, "LUT %d completed\n", i);
+
+ /* Disable IRQ for completed LUT */
+ epdc_lut_complete_intr(priv, i, false);
+
+ /*
+ * Go through all updates in the collision list and
+ * unmask any updates that were colliding with
+ * the completed LUT.
+ */
+ list_for_each_entry(collision_update,
+ &priv->upd_buf_collision_list, list) {
+ collision_update->collision_mask =
+ collision_update->collision_mask & ~BIT(i);
+ }
+
+ epdc_clear_lut_complete_irq(priv, i);
+
+ priv->luts_complete_wb |= 1ULL << i;
+
+ priv->lut_update_order[i] = 0;
+
+ /* Signal completion if submit workqueue needs a LUT */
+ if (priv->waiting_for_lut) {
+ complete(&priv->update_res_free);
+ priv->waiting_for_lut = false;
+ }
+
+ /*
+ * Detect race condition where WB and its LUT complete
+ * (i.e. full update completes) in one swoop
+ */
+ if (epdc_waiting_on_wb &&
+ (i == priv->cur_update->lut_num))
+ wb_lut_done = true;
+ }
+
+ /* Check to see if all updates have completed */
+ if (list_empty(&priv->upd_pending_list) &&
+ is_free_list_full(priv) &&
+ !epdc_waiting_on_wb &&
+ !epdc_luts_active) {
+
+ priv->updates_active = false;
+
+ if (priv->pwrdown_delay != FB_POWERDOWN_DISABLE) {
+ /*
+ * Set variable to prevent overlapping
+ * enable/disable requests
+ */
+ priv->powering_down = true;
+
+ /* Schedule task to disable EPDC HW until next update */
+ schedule_delayed_work(&priv->epdc_done_work,
+ msecs_to_jiffies(priv->pwrdown_delay));
+
+ /* Reset counter to reduce chance of overflow */
+ priv->order_cnt = 0;
+ }
+
+ if (priv->waiting_for_idle)
+ complete(&priv->updates_done);
+ }
+
+ /* Is Working Buffer busy? */
+ if (epdc_wb_busy) {
+ /* Can't submit another update until WB is done */
+ mutex_unlock(&priv->queue_mutex);
+ return;
+ }
+
+ /*
+ * Were we waiting on working buffer?
+ * If so, update queues and check for collisions
+ */
+ if (epdc_waiting_on_wb) {
+ dev_dbg(priv->drm.dev, "\nWorking buffer completed\n");
+
+ /* Signal completion if submit workqueue was waiting on WB */
+ if (priv->waiting_for_wb) {
+ complete(&priv->update_res_free);
+ priv->waiting_for_wb = false;
+ }
+
+ if (epdc_lut_cancelled && !epdc_collision) {
+ /*
+ * Note: The update may be cancelled (void) if all
+ * pixels collided. In that case we handle it as a
+ * collision, not a cancel.
+ */
+
+ /* Clear LUT status (might be set if no AUTOWV used) */
+
+ /*
+ * Disable and clear IRQ for the LUT used.
+ * Even though LUT is cancelled in HW, the LUT
+ * complete bit may be set if AUTOWV not used.
+ */
+ epdc_lut_complete_intr(priv,
+ priv->cur_update->lut_num, false);
+ epdc_clear_lut_complete_irq(priv,
+ priv->cur_update->lut_num);
+
+ priv->lut_update_order[priv->cur_update->lut_num] = 0;
+
+ /* Signal completion if submit workqueue needs a LUT */
+ if (priv->waiting_for_lut) {
+ complete(&priv->update_res_free);
+ priv->waiting_for_lut = false;
+ }
+ } else if (epdc_collision) {
+ /* Check list of colliding LUTs, and add to our collision mask */
+ priv->cur_update->collision_mask =
+ priv->epdc_colliding_luts;
+
+ /* Clear collisions that completed since WB began */
+ priv->cur_update->collision_mask &=
+ ~priv->luts_complete_wb;
+
+ dev_dbg(priv->drm.dev, "Collision mask = 0x%llx\n",
+ priv->epdc_colliding_luts);
+
+ /*
+ * For EPDC 2.0 and later, minimum collision bounds
+ * are provided by HW. Recompute new bounds here.
+ */
+
+ coll_coord = epdc_read(priv, EPDC_UPD_COL_CORD);
+ coll_size = epdc_read(priv, EPDC_UPD_COL_SIZE);
+ drm_rect_init(&priv->cur_update->update_desc->upd_data.update_region,
+ (coll_coord & EPDC_UPD_COL_CORD_XCORD_MASK)
+ >> EPDC_UPD_COL_CORD_XCORD_OFFSET,
+ (coll_coord & EPDC_UPD_COL_CORD_YCORD_MASK)
+ >> EPDC_UPD_COL_CORD_YCORD_OFFSET,
+ ((coll_size & EPDC_UPD_COL_SIZE_WIDTH_MASK)
+ >> EPDC_UPD_COL_SIZE_WIDTH_OFFSET),
+ ((coll_size & EPDC_UPD_COL_SIZE_HEIGHT_MASK)
+ >> EPDC_UPD_COL_SIZE_HEIGHT_OFFSET));
+
+ /*
+ * If we collide with newer updates, then
+ * we don't need to re-submit the update. The
+ * idea is that the newer updates should take
+ * precedence anyways, so we don't want to
+ * overwrite them.
+ */
+ for (temp_mask = priv->cur_update->collision_mask, lut = 0;
+ temp_mask != 0;
+ lut++, temp_mask = temp_mask >> 1) {
+ if (!(temp_mask & 0x1))
+ continue;
+
+ if (priv->lut_update_order[lut] >=
+ priv->cur_update->update_desc->update_order) {
+ dev_dbg(priv->drm.dev,
+ "Ignoring collision with newer update.\n");
+ ignore_collision = true;
+ break;
+ }
+ }
+
+ if (!ignore_collision) {
+ free_update = false;
+
+ /* Move to collision list */
+ list_add_tail(&priv->cur_update->list,
+ &priv->upd_buf_collision_list);
+ }
+ }
+
+ /* Do we need to free the current update descriptor? */
+ if (free_update) {
+ /* Free update descriptor */
+ kfree(priv->cur_update->update_desc);
+
+ /* Add to free buffer list */
+ list_add_tail(&priv->cur_update->list,
+ &priv->upd_buf_free_list);
+
+ /* Check to see if all updates have completed */
+ if (list_empty(&priv->upd_pending_list) &&
+ is_free_list_full(priv) &&
+ !epdc_luts_active) {
+
+ priv->updates_active = false;
+
+ if (priv->pwrdown_delay !=
+ FB_POWERDOWN_DISABLE) {
+ /*
+ * Set variable to prevent overlapping
+ * enable/disable requests
+ */
+ priv->powering_down = true;
+
+ /* Schedule EPDC disable */
+ schedule_delayed_work(&priv->epdc_done_work,
+ msecs_to_jiffies(priv->pwrdown_delay));
+
+ /* Reset counter to reduce chance of overflow */
+ priv->order_cnt = 0;
+ }
+
+ if (priv->waiting_for_idle)
+ complete(&priv->updates_done);
+ }
+ }
+
+ /* Clear current update */
+ priv->cur_update = NULL;
+
+ /* Clear IRQ for working buffer */
+ epdc_working_buf_intr(priv, false);
+ epdc_clear_working_buf_irq(priv);
+ }
+
+ /* Schedule task to submit collision and pending update */
+ if (!priv->powering_down)
+ queue_work(priv->epdc_submit_workqueue,
+ &priv->epdc_submit_work);
+
+ /* Release buffer queues */
+ mutex_unlock(&priv->queue_mutex);
+}
+
+
+int mxc_epdc_init_update(struct mxc_epdc *priv)
+{
+ struct update_data_list *upd_list;
+ int ret;
+ int irq;
+ int i;
+ /*
+ * Initialize lists for pending updates,
+ * active update requests, update collisions,
+ * and freely available updates.
+ */
+ priv->num_luts = EPDC_V2_NUM_LUTS;
+ priv->max_num_updates = EPDC_V2_MAX_NUM_UPDATES;
+
+ INIT_LIST_HEAD(&priv->upd_pending_list);
+ INIT_LIST_HEAD(&priv->upd_buf_queue);
+ INIT_LIST_HEAD(&priv->upd_buf_free_list);
+ INIT_LIST_HEAD(&priv->upd_buf_collision_list);
+
+ devm_add_action_or_reset(priv->drm.dev, cleanup_update_list, priv);
+ /* Allocate update buffers and add them to the list */
+ for (i = 0; i < priv->max_num_updates; i++) {
+ upd_list = kzalloc(sizeof(*upd_list), GFP_KERNEL);
+ if (upd_list == NULL)
+ return -ENOMEM;
+
+ /* Add newly allocated buffer to free list */
+ list_add(&upd_list->list, &priv->upd_buf_free_list);
+ }
+
+
+
+ /* Initialize marker list */
+ INIT_LIST_HEAD(&priv->full_marker_list);
+
+ /* Initialize all LUTs to inactive */
+ priv->lut_update_order =
+ devm_kzalloc(priv->drm.dev, priv->num_luts * sizeof(u32 *), GFP_KERNEL);
+ if (!priv->lut_update_order)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->num_luts; i++)
+ priv->lut_update_order[i] = 0;
+
+ INIT_DELAYED_WORK(&priv->epdc_done_work, epdc_done_work_func);
+ priv->epdc_submit_workqueue = alloc_workqueue("EPDC Submit",
+ WQ_MEM_RECLAIM | WQ_HIGHPRI |
+ WQ_CPU_INTENSIVE | WQ_UNBOUND, 1);
+ INIT_WORK(&priv->epdc_submit_work, epdc_submit_work_func);
+ priv->epdc_intr_workqueue = alloc_workqueue("EPDC Interrupt",
+ WQ_MEM_RECLAIM | WQ_HIGHPRI |
+ WQ_CPU_INTENSIVE | WQ_UNBOUND, 1);
+ INIT_WORK(&priv->epdc_intr_work, epdc_intr_work_func);
+
+ mutex_init(&priv->queue_mutex);
+
+ /* Retrieve EPDC IRQ num */
+ irq = platform_get_irq(to_platform_device(priv->drm.dev), 0);
+ if (irq < 0) {
+ dev_err(priv->drm.dev, "cannot get IRQ resource\n");
+ return -ENODEV;
+ }
+ priv->epdc_irq = irq;
+
+ /* Register IRQ handler */
+ ret = devm_request_irq(priv->drm.dev, priv->epdc_irq,
+ mxc_epdc_irq_handler, 0, "epdc", priv);
+ if (ret) {
+ dev_err(priv->drm.dev, "request_irq (%d) failed with error %d\n",
+ priv->epdc_irq, ret);
+ return ret;
+ }
+
+ return 0;
+
+}
+
diff --git a/drivers/gpu/drm/mxc-epdc/epdc_update.h b/drivers/gpu/drm/mxc-epdc/epdc_update.h
new file mode 100644
index 000000000000..b6f30cf8eda7
--- /dev/null
+++ b/drivers/gpu/drm/mxc-epdc/epdc_update.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (C) 2020 Andreas Kemnade */
+int mxc_epdc_send_single_update(struct drm_rect *clip, int pitch,
+ void *vaddr,
+ struct mxc_epdc *priv);
+void mxc_epdc_draw_mode0(struct mxc_epdc *priv);
+int mxc_epdc_init_update(struct mxc_epdc *priv);
+void mxc_epdc_flush_updates(struct mxc_epdc *priv);
+
diff --git a/drivers/gpu/drm/mxc-epdc/mxc_epdc.h b/drivers/gpu/drm/mxc-epdc/mxc_epdc.h
index f7b1cbc4cc4e..db91e615bd89 100644
--- a/drivers/gpu/drm/mxc-epdc/mxc_epdc.h
+++ b/drivers/gpu/drm/mxc-epdc/mxc_epdc.h
@@ -12,6 +12,35 @@
#include "epdc_regs.h"
#define TEMP_USE_AMBIENT 0x1000
+#define GRAYSCALE_8BIT 0x1
+#define GRAYSCALE_8BIT_INVERTED 0x2
+#define GRAYSCALE_4BIT 0x3
+#define GRAYSCALE_4BIT_INVERTED 0x4
+
+#define AUTO_UPDATE_MODE_REGION_MODE 0
+#define AUTO_UPDATE_MODE_AUTOMATIC_MODE 1
+
+#define UPDATE_SCHEME_SNAPSHOT 0
+#define UPDATE_SCHEME_QUEUE 1
+#define UPDATE_SCHEME_QUEUE_AND_MERGE 2
+
+#define UPDATE_MODE_PARTIAL 0x0
+#define UPDATE_MODE_FULL 0x1
+
+#define WAVEFORM_MODE_GLR16 4
+#define WAVEFORM_MODE_GLD16 5
+#define WAVEFORM_MODE_AUTO 257
+
+#define FB_POWERDOWN_DISABLE -1
+
+struct mxcfb_update_data {
+ struct drm_rect update_region;
+ u32 waveform_mode;
+ u32 update_mode;
+ int temp;
+ int dither_mode;
+ int quant_bit;
+};
struct mxcfb_waveform_modes {
int mode_init;
@@ -87,6 +116,27 @@ struct mxc_epdc {
bool hw_initializing;
bool waiting_for_idle;
+ int order_cnt;
+ struct list_head upd_pending_list;
+ struct list_head upd_buf_queue;
+ struct list_head upd_buf_free_list;
+ struct list_head upd_buf_collision_list;
+ struct update_data_list *cur_update;
+ struct mutex queue_mutex;
+ int epdc_irq;
+ struct list_head full_marker_list;
+ u32 *lut_update_order;
+ u64 epdc_colliding_luts;
+ u64 luts_complete_wb;
+ struct completion updates_done;
+ struct delayed_work epdc_done_work;
+ struct workqueue_struct *epdc_submit_workqueue;
+ struct work_struct epdc_submit_work;
+ struct workqueue_struct *epdc_intr_workqueue;
+ struct work_struct epdc_intr_work;
+ bool waiting_for_wb;
+ bool waiting_for_lut;
+ struct completion update_res_free;
};
static inline u32 epdc_read(struct mxc_epdc *priv, u32 reg)
diff --git a/drivers/gpu/drm/mxc-epdc/mxc_epdc_drv.c b/drivers/gpu/drm/mxc-epdc/mxc_epdc_drv.c
index 4810e5c5bc6e..a0bde06187ca 100644
--- a/drivers/gpu/drm/mxc-epdc/mxc_epdc_drv.c
+++ b/drivers/gpu/drm/mxc-epdc/mxc_epdc_drv.c
@@ -12,6 +12,7 @@
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_crtc_helper.h>
+#include <drm/drm_damage_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_fb_helper.h>
@@ -26,6 +27,7 @@
#include <drm/drm_probe_helper.h>
#include "mxc_epdc.h"
#include "epdc_hw.h"
+#include "epdc_update.h"
#include "epdc_waveform.h"
#define DRIVER_NAME "mxc_epdc"
@@ -211,6 +213,7 @@ static void mxc_epdc_pipe_disable(struct drm_simple_display_pipe *pipe)
struct mxc_epdc *priv = drm_pipe_to_mxc_epdc(pipe);
dev_dbg(priv->drm.dev, "pipe disable\n");
+ mxc_epdc_flush_updates(priv);
if (priv->epdc_mem_virt) {
dma_free_wc(priv->drm.dev, priv->epdc_mem_width * priv->epdc_mem_height,
@@ -227,11 +230,35 @@ static void mxc_epdc_pipe_disable(struct drm_simple_display_pipe *pipe)
}
static void mxc_epdc_pipe_update(struct drm_simple_display_pipe *pipe,
- struct drm_plane_state *plane_state)
+ struct drm_plane_state *old_state)
{
struct mxc_epdc *priv = drm_pipe_to_mxc_epdc(pipe);
+ struct drm_gem_cma_object *gem;
+ struct drm_atomic_helper_damage_iter iter;
+ struct drm_rect clip;
+
dev_dbg(priv->drm.dev, "pipe update\n");
+ if (!old_state->fb) {
+ dev_dbg(priv->drm.dev, "no fb, nothing to update\n");
+ return;
+ }
+
+ if (priv->epdc_mem_virt == NULL)
+ return;
+
+ gem = drm_fb_cma_get_gem_obj(old_state->fb, 0);
+ drm_atomic_helper_damage_iter_init(&iter, old_state, pipe->plane.state);
+ drm_atomic_for_each_plane_damage(&iter, &clip) {
+
+ dev_dbg(priv->drm.dev, "damaged: %d,%d-%d,%d\n",
+ clip.x1, clip.y1, clip.x2, clip.y2);
+
+ mxc_epdc_send_single_update(&clip, old_state->fb->pitches[0],
+ gem->vaddr, priv);
+ }
+
+ return;
}
static const struct drm_simple_display_pipe_funcs mxc_epdc_funcs = {
@@ -280,6 +307,10 @@ static int mxc_epdc_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = mxc_epdc_init_update(priv);
+ if (ret)
+ return ret;
+
ret = request_firmware(&firmware, "imx/epdc/epdc.fw", priv->drm.dev);
if (ret)
return ret;
--
2.30.2
