On 2/4/22 15:37, Tudor Ambarus wrote:
> Describe and enable the AES, SHA and TDES crypto IPs.
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/sama7g5.dtsi | 35 ++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
> index 7972cb8c2562..1f2731a64139 100644
> --- a/arch/arm/boot/dts/sama7g5.dtsi
> +++ b/arch/arm/boot/dts/sama7g5.dtsi
> @@ -393,6 +393,29 @@ pit64b1: timer@e1804000 {
> clock-names = "pclk", "gclk";
> };
>
> + aes: aes@e1810000 {
> + compatible = "atmel,at91sam9g46-aes";
> + reg = <0xe1810000 0x100>;
> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
> + <&dma0 AT91_XDMAC_DT_PERID(2)>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
> + clock-names = "aes_clk";
> + status = "okay";
> + };
> +
> + sha: sha@e1814000 {
> + compatible = "atmel,at91sam9g46-sha";
> + reg = <0xe1814000 0x100>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
> + dma-names = "tx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
> + clock-names = "sha_clk";
> + status = "okay";
> + };
> +
> flx0: flexcom@e1818000 {
> compatible = "atmel,sama5d2-flexcom";
> reg = <0xe1818000 0x200>;
> @@ -475,6 +498,18 @@ trng: rng@e2010000 {
> status = "disabled";
> };
>
> + tdes@e2014000 {
tdes: tdes@e2014000
I should have added a label here. Nicolas, maybe you can add it when applying,
if everything else looks ok to you.
> + compatible = "atmel,at91sam9g46-tdes";
> + reg = <0xe2014000 0x100>;
> + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
> + <&dma0 AT91_XDMAC_DT_PERID(53)>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
> + clock-names = "tdes_clk";
> + status = "okay";
> + };
> +
> flx4: flexcom@e2018000 {
> compatible = "atmel,sama5d2-flexcom";
> reg = <0xe2018000 0x200>;
