[PATCH v2 09/11] PCI: qcom: Remove redundancy between qcom_pcie and qcom_pcie_cfg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In preparation to adding more flags to configuration data, use pointer
to struct qcom_pcie_cfg directly inside struct qcom_pcie, rather than
duplicating all its fields. This would save us from the boilerplate code
that just copies flag values from one struct to another one.

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 37 ++++++++++++--------------
 1 file changed, 17 insertions(+), 20 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 7df8632a21a8..3a0da577b75d 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -198,7 +198,7 @@ struct qcom_pcie {
 	union qcom_pcie_resources res;
 	struct phy *phy;
 	struct gpio_desc *reset;
-	const struct qcom_pcie_ops *ops;
+	const struct qcom_pcie_cfg *cfg;
 };
 
 #define to_qcom_pcie(x)		dev_get_drvdata((x)->dev)
@@ -222,8 +222,8 @@ static int qcom_pcie_start_link(struct dw_pcie *pci)
 	struct qcom_pcie *pcie = to_qcom_pcie(pci);
 
 	/* Enable Link Training state machine */
-	if (pcie->ops->ltssm_enable)
-		pcie->ops->ltssm_enable(pcie);
+	if (pcie->cfg->ops->ltssm_enable)
+		pcie->cfg->ops->ltssm_enable(pcie);
 
 	return 0;
 }
@@ -1307,7 +1307,7 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 
 	qcom_ep_reset_assert(pcie);
 
-	ret = pcie->ops->init(pcie);
+	ret = pcie->cfg->ops->init(pcie);
 	if (ret)
 		return ret;
 
@@ -1315,16 +1315,16 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 	if (ret)
 		goto err_deinit;
 
-	if (pcie->ops->post_init) {
-		ret = pcie->ops->post_init(pcie);
+	if (pcie->cfg->ops->post_init) {
+		ret = pcie->cfg->ops->post_init(pcie);
 		if (ret)
 			goto err_disable_phy;
 	}
 
 	qcom_ep_reset_deassert(pcie);
 
-	if (pcie->ops->config_sid) {
-		ret = pcie->ops->config_sid(pcie);
+	if (pcie->cfg->ops->config_sid) {
+		ret = pcie->cfg->ops->config_sid(pcie);
 		if (ret)
 			goto err;
 	}
@@ -1333,12 +1333,12 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 
 err:
 	qcom_ep_reset_assert(pcie);
-	if (pcie->ops->post_deinit)
-		pcie->ops->post_deinit(pcie);
+	if (pcie->cfg->ops->post_deinit)
+		pcie->cfg->ops->post_deinit(pcie);
 err_disable_phy:
 	phy_power_off(pcie->phy);
 err_deinit:
-	pcie->ops->deinit(pcie);
+	pcie->cfg->ops->deinit(pcie);
 
 	return ret;
 }
@@ -1447,15 +1447,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	struct pcie_port *pp;
 	struct dw_pcie *pci;
 	struct qcom_pcie *pcie;
-	const struct qcom_pcie_cfg *pcie_cfg;
 	int ret;
 
-	pcie_cfg = of_device_get_match_data(dev);
-	if (!pcie_cfg || !pcie_cfg->ops) {
-		dev_err(dev, "Invalid platform data\n");
-		return -EINVAL;
-	}
-
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
 	if (!pcie)
 		return -ENOMEM;
@@ -1475,7 +1468,11 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 
 	pcie->pci = pci;
 
-	pcie->ops = pcie_cfg->ops;
+	pcie->cfg = of_device_get_match_data(dev);
+	if (!pcie->cfg || !pcie->cfg->ops) {
+		dev_err(dev, "Invalid platform data\n");
+		return -EINVAL;
+	}
 
 	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
 	if (IS_ERR(pcie->reset)) {
@@ -1501,7 +1498,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		goto err_pm_runtime_put;
 	}
 
-	ret = pcie->ops->get_resources(pcie);
+	ret = pcie->cfg->ops->get_resources(pcie);
 	if (ret)
 		goto err_pm_runtime_put;
 
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux