This patch series adds a DRM driver for the Solomon OLED SSD1305, SSD1306, SSD1307 and SSD1309 displays. It is a port of the ssd1307fb fbdev driver. Using the DRM fb emulation, all the tests from Geert Uytterhoeven's fbtest (https://git.kernel.org/pub/scm/linux/kernel/git/geert/fbtest.git) passes: ./fbtest -f /dev/fb1 Using drawops cfb32 (32 bpp packed pixels) Available visuals: Monochrome Grayscale 256 Truecolor 8:8:8:0 Using visops truecolor Running all tests test001: PASSED test002: PASSED test003: PASSED test004: PASSED test005: PASSED test006: PASSED test008: PASSED Screen size too small for this test test010: PASSED Benchmarking... 10x10 squares: 414.41 Mpixels/s Benchmarking... 20x20 squares: 858.31 Mpixels/s Benchmarking... 50x50 squares: 1586.33 Mpixels/s test012: PASSED Benchmarking... R5 circles: 234.68 Mpixels/s Benchmarking... R10 circles: 498.24 Mpixels/s Benchmarking... R25 circles: 942.34 Mpixels/s test013: PASSED This is a v2 that addresses all the issues pointed in v1, thanks a lot to everyone that gave me feedback and reviews. I tried to not miss any comment, but there were a lot so forgive me if something is not there. Patch #1 adds two new helpers, drm_fb_gray8_to_mono_reversed() to convert from grayscale to monochrome and a drm_fb_xrgb8888_to_mono_reversed() to convert from XR24 to monochrome. The latter internally use thes former. Patch #2 adds the driver. The name ssd130x was used instead of ssd1307fb to denote that this driver is not only for SSD1307, but also for other displays from the same chip family. Patch #3 just adds a MAINTAINERS entry for the DRM driver and patch #4 adds myself as a co-maintainer of the existing Device Tree binding for ssd1307fb, since the same is shared between the fbdev and DRM drivers. Best regards, Javier Changes in v2: - Drop patch that was adding a DRM_MODE_CONNECTOR_I2C type. - Invert order of backlight {en,dis}able and display {on,off} (Sam Ravnborg) - Don't clear the screen and turn on display on probe (Sam Ravnborg) - Use backlight_get_brightness() macro to get BL brightness (Sam Ravnborg) - Use dev managed version of devm_backlight_device_register() (Sam Ravnborg) - Use dev_name(dev) for backlight name instead of an array (Sam Ravnborg) - Drop the .get_brightness callback since isn't needed (Sam Ravnborg) - Add myself as co-maintainer of the ssd1370fb DT binding (Sam Ravnborg) - Add Sam Ravnborg's acked-by tag to patch 3/4. - Rename driver to ssd130x since supports a display family (Thomas Zimmermann) - Drop the TINY prefix from the Kconfig symbol (Thomas Zimmermann) - Sort the Kconfig symbol dependencies alphabetically (Thomas Zimmermann) - Rename struct ssd130x_array to struct ssd130x_i2c_msg (Thomas Zimmermann) - Rename struct ssd130x_i2c_msg .type member to .cmd (Thomas Zimmermann) - Use sizeof(*foo) instead of sizeof(struct foo) (Thomas Zimmermann) - Use struct_size() macro to calculate sizeof(*foo) + len (Thomas Zimmermann) - Use kcalloc() instead of kmalloc_array() + memset() (Thomas Zimmermann) - Use shadow plane helpers virtual screen support (Thomas Zimmermann) - Remove unused goto label in ssd1307_fb_blit_rect() (Thomas Zimmermann) - Use drm_set_preferred_mode() inset of manually set (Thomas Zimmermann) - Use shadow plane helpers virtual screen support (Thomas Zimmermann) - Remove unused goto label in ssd1307_fb_blit_rect() (Thomas Zimmermann) - Use drm_set_preferred_mode() inset of manually set (Thomas Zimmermann) - Reorganize code in probe to make it more legible (Thomas Zimmermann) - ssd130x_write_cmd() uses varargs to simplify I2C code (Thomas Zimmermann) - Move regulator/pwm init logic to display pipe enable callback. - Also add a drm_fb_xrgb8888_to_mono_reversed() helper (Thomas Zimmermann) - Add a drm_fb_gray8_to_mono_reversed_line() helper (Thomas Zimmermann) Javier Martinez Canillas (4): drm/format-helper: Add drm_fb_{xrgb8888,gray8}_to_mono_reversed() drm/tiny: Add driver for Solomon SSD130X OLED displays MAINTAINERS: Add entry for Solomon SSD130X OLED displays DRM driver dt-bindings: display: ssd1307fb: Add myself as binding co-maintainer .../bindings/display/solomon,ssd1307fb.yaml | 1 + MAINTAINERS | 7 + drivers/gpu/drm/drm_format_helper.c | 80 ++ drivers/gpu/drm/tiny/Kconfig | 12 + drivers/gpu/drm/tiny/Makefile | 1 + drivers/gpu/drm/tiny/ssd130x.c | 971 ++++++++++++++++++ include/drm/drm_format_helper.h | 7 + 7 files changed, 1079 insertions(+) create mode 100644 drivers/gpu/drm/tiny/ssd130x.c -- 2.34.1
