On 11.01.22 12:25, Matthias Schiffer wrote:
> Specifying partitions directly in the flash node is deprecated, a
> fixed-partitions node should be used instead. Therefore, it doesn't make
> sense to have these properties in the flash nodes.
>
> Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 --
> arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 ++------
> 2 files changed, 2 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> index 873c123c611e..7eca697e1ca1 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> @@ -623,8 +623,6 @@ flash@0 {
> cdns,tchsh-ns = <60>;
> cdns,tslch-ns = <60>;
> cdns,read-delay = <2>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index 821ee7f2eff0..9c06da9d6d8f 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -340,14 +340,12 @@ &main_spi0 {
> ti,pindir-d0-out-d1-in;
> status = "okay";
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <1>;
> spi-rx-bus-width = <1>;
> spi-max-frequency = <48000000>;
> - #address-cells = <1>;
> - #size-cells= <1>;
> };
> };
>
> @@ -442,7 +440,7 @@ &ospi0 {
> pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
> status = "okay";
>
> - flash@0{
> + flash@0 {
> compatible = "jedec,spi-nor";
> reg = <0x0>;
> spi-tx-bus-width = <8>;
> @@ -453,8 +451,6 @@ flash@0{
> cdns,tchsh-ns = <60>;
> cdns,tslch-ns = <60>;
> cdns,read-delay = <0>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> };
> };
>
For the iot2050 bits:
Acked-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
--
Siemens AG, Technology
Competence Center Embedded Linux
