Re: [PATCH v12 2/9] drm/ingenic: Add support for JZ4780 and HDMI output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nikolaus,

Le mer., févr. 2 2022 at 12:56:35 +0100, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :
Hi Paul,
thanks for the reviews. Looks as if we are close to making a goal.

 Am 02.02.2022 um 11:23 schrieb Paul Cercueil <paul@xxxxxxxxxxxxxxx>:

 Hi Nikolaus,

Le lun., janv. 31 2022 at 13:26:48 +0100, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :
 From: Paul Boddie <paul@xxxxxxxxxxxxx>
 Add support for the LCD controller present on JZ4780 SoCs.
 This SoC uses 8-byte descriptors which extend the current
 4-byte descriptors used for other Ingenic SoCs.
 Tested on MIPS Creator CI20 board.
 Signed-off-by: Paul Boddie <paul@xxxxxxxxxxxxx>
 Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
 Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
 ---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 61 ++++++++++++++++++++++-
 drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++
 2 files changed, 98 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
 index 9c60fc4605e4b..ccdb9eedd9247 100644
 --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
 +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
 @@ -6,6 +6,7 @@
 #include "ingenic-drm.h"
 +#include <linux/bitfield.h>
 #include <linux/component.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
 @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
 	u32 addr;
 	u32 id;
 	u32 cmd;
 +	/* extended hw descriptor for jz4780 */
 +	u32 offsize;
 +	u32 pagewidth;
 +	u32 cpos;
 +	u32 dessize;
 } __aligned(16);
 struct ingenic_dma_hwdescs {
 @@ -59,7 +65,9 @@ struct ingenic_dma_hwdescs {
 struct jz_soc_info {
 	bool needs_dev_clk;
 	bool has_osd;
 +	bool has_alpha;
 	bool map_noncoherent;
 +	bool use_extended_hwdesc;
 	unsigned int max_width, max_height;
 	const u32 *formats_f0, *formats_f1;
 	unsigned int num_formats_f0, num_formats_f1;
@@ -446,6 +454,9 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
 	if (!crtc)
 		return 0;
 +	if (plane == &priv->f0)
 +		return -EINVAL;

This will break JZ4725B -> JZ4770 SoCs, the f0 plane is perfectly usable there.

Hm. I think it was your request/proposal to add this [1]?

Because otherwise with your current patchset the f0 plane does not work *on JZ4780*. It does work on older SoCs.

What I have forgotten is why the f0 plane should not be usable for jz4780.

We return an error here to prevent userspace from using the f0 plane until it's effectively working on the JZ4780.

Cheers,
-Paul

BR and thanks,
Nikolaus

[1] end of https://patchwork.kernel.org/project/dri-devel/patch/2c7d0aa7d3ef480ebb996d37c27cbaa6f722728b.1633436959.git.hns@xxxxxxxxxxxxx/#24578683



 Cheers,
 -Paul

 +
 	crtc_state = drm_atomic_get_existing_crtc_state(state,
 							crtc);
 	if (WARN_ON(!crtc_state))
@@ -662,6 +673,33 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
 		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
 		hwdesc->next = dma_hwdesc_addr(priv, next_id);
 +		if (priv->soc_info->use_extended_hwdesc) {
 +			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
 +
 +			/* Extended 8-byte descriptor */
 +			hwdesc->cpos = 0;
 +			hwdesc->offsize = 0;
 +			hwdesc->pagewidth = 0;
 +
 +			switch (newstate->fb->format->format) {
 +			case DRM_FORMAT_XRGB1555:
 +				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
 +				fallthrough;
 +			case DRM_FORMAT_RGB565:
 +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
 +				break;
 +			case DRM_FORMAT_XRGB8888:
 +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
 +				break;
 +			}
 +			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
 +					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
 +			hwdesc->dessize =
 +				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
 +				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
 +				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
 +		}
 +
 		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
 			fourcc = newstate->fb->format->format;
@@ -693,6 +731,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
 		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
 	}
 +	if (priv->soc_info->use_extended_hwdesc)
 +		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
 +
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -1015,6 +1056,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
 	long parent_rate;
 	unsigned int i, clone_mask = 0;
 	int ret, irq;
 +	u32 osdc = 0;
 	soc_info = of_device_get_match_data(dev);
 	if (!soc_info) {
@@ -1272,7 +1314,10 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
 	/* Enable OSD if available */
 	if (soc_info->has_osd)
 -		regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
 +		osdc |= JZ_LCD_OSDC_OSDEN;
 +	if (soc_info->has_alpha)
 +		osdc |= JZ_LCD_OSDC_ALPHAEN;
 +	regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc);
 	mutex_init(&priv->clk_mutex);
 	priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
@@ -1468,10 +1513,24 @@ static const struct jz_soc_info jz4770_soc_info = {
 	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
 };
 +static const struct jz_soc_info jz4780_soc_info = {
 +	.needs_dev_clk = true,
 +	.has_osd = true,
 +	.has_alpha = true,
 +	.use_extended_hwdesc = true,
 +	.max_width = 4096,
 +	.max_height = 2048,
 +	.formats_f1 = jz4770_formats_f1,
 +	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
 +	.formats_f0 = jz4770_formats_f0,
 +	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
 +};
 +
 static const struct of_device_id ingenic_drm_of_match[] = {
 	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
 	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
 +	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
 index 22654ac1dde1c..cb1d09b625881 100644
 --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
 +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
 @@ -44,8 +44,11 @@
 #define JZ_REG_LCD_XYP1				0x124
 #define JZ_REG_LCD_SIZE0			0x128
 #define JZ_REG_LCD_SIZE1			0x12c
 +#define JZ_REG_LCD_PCFG				0x2c0
 #define JZ_LCD_CFG_SLCD				BIT(31)
 +#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
 +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
 #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
 #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
 #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
 @@ -63,6 +66,7 @@
 #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
 #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
 #define JZ_LCD_CFG_18_BIT			BIT(7)
 +#define JZ_LCD_CFG_24_BIT			BIT(6)
 #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
 #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
 @@ -132,6 +136,7 @@
 #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
 #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
 #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
 +#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
 #define JZ_LCD_SYNC_MASK			0x3ff
 @@ -153,6 +158,7 @@
 #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
 #define JZ_LCD_OSDC_OSDEN			BIT(0)
 +#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
 #define JZ_LCD_OSDC_F0EN			BIT(3)
 #define JZ_LCD_OSDC_F1EN			BIT(4)
 @@ -176,6 +182,38 @@
 #define JZ_LCD_SIZE01_WIDTH_LSB			0
 #define JZ_LCD_SIZE01_HEIGHT_LSB		16
 +#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
 +#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
 +#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
 +
 +#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
 +#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
 +#define JZ_LCD_CPOS_BPP_30			(7 << 27)
 +#define JZ_LCD_CPOS_RGB555			BIT(30)
 +#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
 +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
 +#define JZ_LCD_CPOS_COEFFICIENT_0		0
 +#define JZ_LCD_CPOS_COEFFICIENT_1		1
 +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
 +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
 +
 +#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
 +#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
 +#define JZ_LCD_RGBC_422				BIT(8)
 +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
 +
 +#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
 +#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
 +#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
 +#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
 +#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
 +#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
 +#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
 +#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
 +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
 +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
 +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
 +
 struct device;
 struct drm_plane;
 struct drm_plane_state;
 --
 2.33.0








[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux