On 2/1/22 12:14 PM, frowand.list@xxxxxxxxx wrote: > From: Frank Rowand <frank.rowand@xxxxxxxx> > < snip > > > I will also reply with examples of raw and processed console logs. < snip > In 5.6-rc1 there was a problem with the test of gpio hogs. This is the raw console log that showed the problem. $ cat ../linux--5.6-rc/console_gpio_unittest Android Bootloader - UART_DM Initialized!!! [0] welcome to lk [10] platform_init() [10] target_init() [10] Display Init: Start [10] display_init(),target_id=10. [30] Config MIPI_VIDEO_PANEL. [30] Turn on MIPI_VIDEO_PANEL. [50] Video lane tested successfully [50] Display Init: Done [80] Loading keystore failed status 5 [80] ERROR: scm_protect_keystore Failed[200] USB init ept @ 0xf96b000 [220] fastboot_init() [220] udc_start() [350] -- reset -- [350] -- portchange -- [460] -- reset -- [460] -- portchange -- [650] fastboot: processing commands [760] fastboot: download:00f3f800 [1250] fastboot: boot [1260] Found Appeneded Flattened Device tree [1270] cmdline: console=ttyMSM0,115200,n8 androidboot.hardware=qcom maxcpus=2 msm_rtb.filter=0x37 ehci-hcd.park=3 norandmaps androidboot.emmc=true androidboot.serialno=40081c41 androidboot.baseband=apq [1290] Updating device tree: start [1290] Updating device tree: done [1300] booting linux @ 0x8000, ramdisk @ 0x2000000 (9533134), tags/device tree @ 0x1e00000 [1300] Turn off MIPI_VIDEO_PANEL. [1300] Continuous splash enabled, keeping panel alive. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.6.0-rc1-00002-g6be01ed870a2-dirty (frowand@xps8900) (gcc version 4.6.x-google 20120106 (prerelease) (GCC)) #4 SMP PREEMPT Wed Feb 19 18:23:24 CST 2020 [ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5787d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Qualcomm APQ8074 Dragonboard [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 256 MiB at 0x70000000 [ 0.000000] percpu: Embedded 19 pages/cpu s48256 r8192 d21376 u77824 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 490240 [ 0.000000] Kernel command line: console=ttyMSM0,115200,n8 androidboot.hardware=qcom maxcpus=2 msm_rtb.filter=0x37 ehci-hcd.park=3 norandmaps androidboot.emmc=true androidboot.serialno=40081c41 androidboot.baseband=apq [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 1662424K/1967104K available (9216K kernel code, 946K rwdata, 3852K rodata, 1024K init, 269K bss, 42536K reserved, 262144K cma-reserved, 1048576K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x52c/0x76c with crng_init=0 [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000016] Switching to timer-based delay loop, resolution 52ns [ 0.000425] Console: colour dummy device 80x30 [ 0.000457] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000471] pid_max: default: 32768 minimum: 301 [ 0.000603] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000620] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001219] CPU: Testing write buffer coherency: ok [ 0.001503] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.001525] qcom_scm: convention: smc legacy [ 0.059946] Setting up static identity map for 0x300000 - 0x300060 [ 0.079947] rcu: Hierarchical SRCU implementation. [ 0.120028] smp: Bringing up secondary CPUs ... [ 0.200490] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.200699] smp: Brought up 1 node, 2 CPUs [ 0.200714] SMP: Total of 2 processors activated (76.80 BogoMIPS). [ 0.200722] CPU: All CPU(s) started in SVC mode. [ 0.201334] devtmpfs: initialized [ 0.210578] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0 [ 0.210937] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.210957] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.220811] pinctrl core: initialized pinctrl subsystem [ 0.221680] thermal_sys: Registered thermal governor 'step_wise' [ 0.223264] NET: Registered protocol family 16 [ 0.224749] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.226015] cpuidle: using governor menu [ 0.226397] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.226409] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.264195] iommu: Default domain type: Translated [ 0.264493] vgaarb: loaded [ 0.264996] SCSI subsystem initialized [ 0.265460] usbcore: registered new interface driver usbfs [ 0.265527] usbcore: registered new interface driver hub [ 0.265615] usbcore: registered new device driver usb [ 0.265976] qcom_scm: convention: smc legacy [ 0.266643] Advanced Linux Sound Architecture Driver Initialized. [ 0.267589] clocksource: Switched to clocksource arch_sys_counter [ 0.703278] NET: Registered protocol family 2 [ 0.703747] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.703772] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.703832] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.703919] TCP: Hash tables configured (established 8192 bind 8192) [ 0.704011] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.704038] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.704190] NET: Registered protocol family 1 [ 0.704766] RPC: Registered named UNIX socket transport module. [ 0.704777] RPC: Registered udp transport module. [ 0.704786] RPC: Registered tcp transport module. [ 0.704795] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.704809] PCI: CLS 0 bytes, default 64 [ 0.705072] Trying to unpack rootfs image as initramfs... [ 1.255915] Freeing initrd memory: 9312K [ 1.256509] hw perfevents: enabled with armv7_krait PMU driver, 5 counters available [ 1.258217] Initialise system trusted keyrings [ 1.258416] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 1.264805] NFS: Registering the id_resolver key type [ 1.264829] Key type id_resolver registered [ 1.264840] Key type id_legacy registered [ 1.265772] Key type cifs.idmap registered [ 1.265789] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 1.266082] fuse: init (API version 7.31) [ 1.288256] Key type asymmetric registered [ 1.288269] Asymmetric key parser 'x509' registered [ 1.288323] bounce: pool size: 64 pages [ 1.288367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.288379] io scheduler mq-deadline registered [ 1.288388] io scheduler kyber registered [ 1.306222] bam-dma-engine f9944000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use [ 1.310473] msm_serial f991e000.serial: msm_serial: detected port #0 [ 1.310511] msm_serial f991e000.serial: uartclk = 7372800 [ 1.310561] f991e000.serial: ttyMSM0 at MMIO 0xf991e000 (irq = 28, base_baud = 460800) is a MSM [ 1.310589] msm_serial: console setup on port #0 [ 1.898395] printk: console [ttyMSM0] enabled [ 1.903559] msm_serial: driver initialized [ 1.919151] brd: module loaded [ 1.929372] loop: module loaded [ 1.929912] SCSI Media Changer driver v0.25 [ 1.932366] spmi spmi-0: PMIC arbiter version v1 (0x20000002) [ 1.949269] s1: supplied by regulator-dummy [ 1.949606] s2: supplied by regulator-dummy [ 1.952558] s3: supplied by regulator-dummy [ 1.956764] s4: Bringing 5100000uV into 5000000-5000000uV [ 1.960949] l1: supplied by regulator-dummy [ 1.966459] l2: supplied by regulator-dummy [ 1.970481] l3: supplied by regulator-dummy [ 1.974614] l4: supplied by regulator-dummy [ 1.978846] l5: supplied by regulator-dummy [ 1.982949] l6: supplied by regulator-dummy [ 1.987132] l7: supplied by regulator-dummy [ 1.991315] l8: supplied by regulator-dummy [ 1.995467] l9: supplied by regulator-dummy [ 1.999661] l10: supplied by regulator-dummy [ 2.003794] l11: supplied by regulator-dummy [ 2.008334] l12: supplied by regulator-dummy [ 2.012568] l13: supplied by regulator-dummy [ 2.016825] l14: supplied by regulator-dummy [ 2.021093] l15: supplied by regulator-dummy [ 2.025335] l16: supplied by regulator-dummy [ 2.029624] l17: supplied by regulator-dummy [ 2.033850] l18: supplied by regulator-dummy [ 2.038117] l19: supplied by regulator-dummy [ 2.042351] l20: supplied by regulator-dummy [ 2.046617] l21: supplied by regulator-dummy [ 2.050884] l22: supplied by regulator-dummy [ 2.055122] l23: supplied by regulator-dummy [ 2.059395] l24: supplied by regulator-dummy [ 2.063630] lvs1: supplied by regulator-dummy [ 2.067841] lvs2: supplied by regulator-dummy [ 2.072066] lvs3: supplied by regulator-dummy [ 2.076579] 5vs1: supplied by s4 [ 2.081017] 5vs2: supplied by s4 [ 2.085591] libphy: Fixed MDIO Bus: probed [ 2.087213] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 2.090958] CSLIP: code copyright 1989 Regents of the University of California. [ 2.100609] usbcore: registered new interface driver ax88179_178a [ 2.107789] usbcore: registered new interface driver cdc_ether [ 2.114005] usbcore: registered new interface driver net1080 [ 2.119761] usbcore: registered new interface driver cdc_subset [ 2.125572] usbcore: registered new interface driver cdc_ncm [ 2.131410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.137071] ehci-pci: EHCI PCI platform driver [ 2.143515] usbcore: registered new interface driver cdc_acm [ 2.147846] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.169389] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: registered as rtc0 [ 2.169602] i2c /dev entries driver [ 2.177084] qcom-smbb fc4cf000.spmi:pm8941@0:charger@1000: Initializing SMBB rev 3 [ 2.182317] otg-vbus: supplied by 5vs1 [ 2.187815] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations [ 2.190071] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations [ 2.197256] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations [ 2.204746] cpuidle: enable-method property 'qcom,kpss-acc-v2' found operations [ 2.212300] sdhci: Secure Digital Host Controller Interface driver [ 2.219025] sdhci: Copyright(c) Pierre Ossman [ 2.225230] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.230951] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 2.236664] usbcore: registered new interface driver usbhid [ 2.240021] usbhid: USB HID core driver [ 2.248434] oprofile: using timer interrupt. [ 2.249403] NET: Registered protocol family 17 [ 2.253769] Key type dns_resolver registered [ 2.258180] Registering SWP/SWPB emulation handler [ 2.262768] Loading compiled-in X.509 certificates [ 2.319325] debugfs: Directory 'fc4a9000.thermal-sensor' with parent 'tsens' already present! [ 2.326483] s1: supplied by regulator-dummy [ 2.326885] s1: Bringing 0uV into 675000-675000uV [ 2.332731] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 2.336719] s2: supplied by regulator-dummy [ 2.340452] s2: Bringing 0uV into 500000-500000uV [ 2.344669] s3: supplied by regulator-dummy [ 2.349827] ocmem fdd00000.ocmem: 8 ports, 3 regions, 2048 macros, interleaved [ 2.353491] s3: Bringing 0uV into 500000-500000uV [ 2.362620] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 2.365773] s4: supplied by regulator-dummy [ 2.370062] s4: Bringing 0uV into 500000-500000uV [ 2.374271] s5: supplied by regulator-dummy [ 2.381554] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 2.384149] rtc-pm8xxx fc4cf000.spmi:pm8941@0:rtc@6000: setting system clock to 1970-02-07T19:24:17 UTC (3266657) [ 2.387869] ### dt-test ### start of unittest - you will see error messages [ 2.398101] s6: supplied by regulator-dummy [ 2.399604] ### dt-test ### EXPECT \ : Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 2.399842] Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 2.418543] s7: supplied by regulator-dummy [ 2.422498] ### dt-test ### EXPECT / : Duplicate name in testcase-data, renamed to "duplicate-name#1" [ 2.423561] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 2.425369] s8: supplied by regulator-dummy [ 2.429148] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 2.429156] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 2.429160] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 2.439237] s1: supplied by regulator-dummy [ 2.452933] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 2.457091] s1: Bringing 0uV into 1300000-1300000uV [ 2.469597] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1 [ 2.469602] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 2.484573] s2: supplied by regulator-dummy [ 2.498542] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 2.504829] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 2.515126] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 2.515130] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 2.515189] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 2.520022] s2: Bringing 0uV into 2150000-2150000uV [ 2.534335] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-a: could not find phandle [ 2.534339] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 [ 2.544887] s3: supplied by regulator-dummy [ 2.548132] OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 [ 2.555433] s3: Bringing 0uV into 1800000-1800000uV [ 2.560266] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 [ 2.560270] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 [ 2.560298] OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 [ 2.560303] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-a: #phandle-cells = 3 found -1 [ 2.560535] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1 [ 2.570510] l1: supplied by s1 [ 2.579510] OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1 [ 2.586682] l1: Bringing 0uV into 1225000-1225000uV [ 2.591521] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-b: could not get #phandle-missing-cells for /testcase-data/phandle-tests/provider1 [ 2.591525] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-b: could not find phandle [ 2.591587] OF: /testcase-data/phandle-tests/consumer-b: could not find phandle [ 2.601775] l2: supplied by s3 [ 2.611233] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-b: could not find phandle [ 2.611268] ### dt-test ### EXPECT \ : OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 [ 2.615419] l2: Bringing 0uV into 1200000-1200000uV [ 2.623396] OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 [ 2.628271] l3: supplied by s1 [ 2.638063] ### dt-test ### EXPECT / : OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1 [ 2.640314] ### dt-test ### EXPECT \ : platform testcase-data:testcase-device2: IRQ index 0 not found [ 2.648179] l3: Bringing 0uV into 1225000-1225000uV [ 2.656092] platform testcase-data:testcase-device2: IRQ index 0 not found [ 2.666227] l4: supplied by s1 [ 2.680516] ### dt-test ### EXPECT / : platform testcase-data:testcase-device2: IRQ index 0 not found [ 2.686076] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status [ 2.696208] l4: Bringing 0uV into 1225000-1225000uV [ 2.700903] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status [ 2.834265] l5: supplied by s2 [ 2.836015] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest0/status [ 2.836019] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status [ 2.847318] l5: Bringing 0uV into 1800000-1800000uV [ 2.850356] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status [ 2.886261] l6: supplied by s2 [ 2.886399] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest1/status [ 2.886404] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status [ 2.898903] l6: Bringing 0uV into 1800000-1800000uV [ 2.902539] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 2.917894] l7: supplied by s2 [ 2.932924] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status [ 2.937295] l7: Bringing 0uV into 1800000-1800000uV [ 2.942841] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest2/status [ 2.942846] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status [ 2.945614] l8: supplied by regulator-dummy [ 2.958650] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status [ 2.963000] l8: Bringing 0uV into 1800000-1800000uV [ 2.979086] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest3/status [ 2.980440] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status [ 2.994350] l9: supplied by regulator-dummy [ 2.998308] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status [ 3.011109] l9: Bringing 0uV into 1800000-1800000uV [ 3.016696] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest5/status [ 3.016850] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status [ 3.031831] l10: supplied by regulator-dummy [ 3.048351] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status [ 3.050677] l10: Bringing 0uV into 1800000-1800000uV [ 3.064441] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest6/status [ 3.064446] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status [ 3.069011] l11: supplied by s1 [ 3.084690] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status [ 3.099536] l11: Bringing 0uV into 1300000-1300000uV [ 3.104432] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 3.173762] l12: supplied by s2 [ 3.174105] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest7/status [ 3.174972] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status [ 3.178158] l12: Bringing 0uV into 1800000-1800000uV [ 3.181186] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status [ 3.217801] l13: supplied by regulator-dummy [ 3.230269] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/status [ 3.230275] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo [ 3.234444] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo [ 3.235079] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 3.249677] l13: Bringing 0uV into 1800000-1800000uV [ 3.283658] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/test-unittest8/property-foo [ 3.283662] ### dt-test ### EXPECT \ : OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 3.288738] ### dt-test ### EXPECT \ : OF: overlay: overlay #6 is not topmost [ 3.304462] OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 3.324871] OF: overlay: overlay #6 is not topmost [ 3.335975] ### dt-test ### EXPECT / : OF: overlay: overlay #6 is not topmost [ 3.335978] ### dt-test ### EXPECT / : OF: overlay: node_overlaps_later_cs: #6 overlaps with #7 @/testcase-data/overlay-node/test-bus/test-unittest8 [ 3.340707] l14: supplied by s2 [ 3.361105] l14: Bringing 0uV into 1800000-1800000uV [ 3.364354] l15: supplied by s2 [ 3.367222] ### dt-test ### EXPECT \ : i2c i2c-1: Added multiplexed i2c bus 2 [ 3.368029] i2c i2c-1: Added multiplexed i2c bus 2 [ 3.369217] l15: Bringing 0uV into 2050000-2050000uV [ 3.372488] ### dt-test ### EXPECT / : i2c i2c-1: Added multiplexed i2c bus 2 [ 3.372492] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status [ 3.379783] l16: supplied by regulator-dummy [ 3.384807] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 3.389149] l16: Bringing 0uV into 2700000-2700000uV [ 3.396589] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status [ 3.427778] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest12/status [ 3.427783] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status [ 3.427844] l17: supplied by regulator-dummy [ 3.440871] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status [ 3.457520] l17: Bringing 0uV into 2700000-2700000uV [ 3.475876] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data/overlay-node/test-bus/i2c-test-bus/test-unittest13/status [ 3.475880] ### dt-test ### EXPECT \ : i2c i2c-1: Added multiplexed i2c bus 3 [ 3.478783] l18: supplied by regulator-dummy [ 3.497049] i2c i2c-1: Added multiplexed i2c bus 3 [ 3.497674] l18: Bringing 0uV into 2850000-2850000uV [ 3.514706] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 3.521586] l19: supplied by regulator-dummy [ 3.525579] ### dt-test ### EXPECT / : i2c i2c-1: Added multiplexed i2c bus 3 [ 3.534279] ### dt-test ### EXPECT \ : GPIO line <<int>> (line-B-input) hogged as input [ 3.535218] l19: Bringing 0uV into 3300000-3300000uV [ 3.540558] ### dt-test ### EXPECT \ : GPIO line <<int>> (line-A-input) hogged as input [ 3.544881] l20: supplied by regulator-dummy [ 3.551751] GPIO line 315 (line-B-input) hogged as input [ 3.559114] l20: Bringing 0uV into 2950000-2950000uV [ 3.564560] GPIO line 309 (line-A-input) hogged as input [ 3.572690] l21: supplied by regulator-dummy [ 3.579102] ### dt-test ### EXPECT / : GPIO line <<int>> (line-A-input) hogged as input [ 3.581811] l21: Bringing 0uV into 2950000-2950000uV [ 3.586628] ### dt-test ### EXPECT / : GPIO line <<int>> (line-B-input) hogged as input [ 3.586633] ### dt-test ### EXPECT \ : GPIO line <<int>> (line-D-input) hogged as input [ 3.592642] l22: supplied by regulator-dummy [ 3.600104] GPIO line 307 (line-D-input) hogged as input [ 3.604075] l22: Bringing 0uV into 3000000-3000000uV [ 3.609574] ### dt-test ### EXPECT / : GPIO line <<int>> (line-D-input) hogged as input [ 3.617292] l23: supplied by regulator-dummy [ 3.627709] ### dt-test ### EXPECT \ : GPIO line <<int>> (line-C-input) hogged as input [ 3.629414] l23: Bringing 0uV into 3000000-3000000uV [ 3.635770] ### dt-test ### EXPECT / : GPIO line <<int>> (line-C-input) hogged as input [ 3.640074] l24: supplied by regulator-dummy [ 3.647322] mmc0: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using ADMA [ 3.651912] l24: Bringing 0uV into 3075000-3075000uV [ 3.659592] ### dt-test ### FAIL of_unittest_overlay_gpio():2664 unittest_gpio_chip_request() called 0 times (expected 1 time) [ 3.665255] lvs1: supplied by s3 [ 3.682927] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status [ 3.682931] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status [ 3.684820] lvs2: supplied by s3 [ 3.690133] sdhci_msm f98a4900.sdhci: Got CD GPIO [ 3.700948] lvs3: supplied by s3 [ 3.704316] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up [ 3.704321] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up [ 3.718126] 5vs1: supplied by s4 [ 3.731723] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status [ 3.731727] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color [ 3.734472] 5vs2: supplied by s4 [ 3.738656] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate [ 3.738660] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2 [ 3.805410] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200 [ 3.818689] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left [ 3.830515] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right [ 3.843341] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status [ 3.860744] mmc1: SDHCI controller on f98a4900.sdhci [f98a4900.sdhci] using ADMA [ 3.868094] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status [ 3.886817] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up [ 3.897848] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up [ 3.910448] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status [ 3.923033] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color [ 3.934061] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate [ 3.945320] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2 [ 3.956218] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200 [ 3.965748] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left [ 3.975753] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right [ 3.991170] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_right [ 3.991174] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200_left [ 3.996032] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/ride_200 [ 4.008806] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /__symbols__/hvac_2 [ 4.009664] msm_hsusb f9a55000.usb: failed to create device link to ci_hdrc.0.ulpi [ 4.021413] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/rate [ 4.021416] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/color [ 4.052920] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/lights@40000/status [ 4.066380] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@40/incline-up [ 4.079700] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/ride@100/track@30/incline-up [ 4.093071] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/fairway-1/status [ 4.108241] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/status [ 4.123325] ### dt-test ### EXPECT \ : OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller [ 4.136370] ### dt-test ### EXPECT \ : OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name [ 4.150628] OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller [ 4.179147] OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name [ 4.190137] ### dt-test ### EXPECT / : OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/controller/name [ 4.190145] ### dt-test ### EXPECT / : OF: overlay: ERROR: multiple fragments add and/or delete node /testcase-data-2/substation@100/motor-1/controller [ 4.202662] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.217880] ### dt-test ### EXPECT \ : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.231256] ### dt-test ### EXPECT \ : OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.231507] mmc1: new ultra high speed DDR50 SDHC card at address aaaa [ 4.246031] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.271061] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 4.275021] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.298499] OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.298507] mmcblk1: p1 [ 4.310625] ### dt-test ### EXPECT / : OF: overlay: ERROR: multiple fragments add, update, and/or delete property /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.310629] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.325399] ### dt-test ### EXPECT / : OF: overlay: WARNING: memory leak will occur if overlay removed, property: /testcase-data-2/substation@100/motor-1/rpm_avail [ 4.340232] ### dt-test ### end of unittest - 258 passed, 1 failed [ 4.369695] ALSA device list: [ 4.375127] No soundc�[ 4.382470] Freeing unused kernel memory: 1024K [ 4.392204] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 4.392431] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 4.395717] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 4.401692] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB, chardev (247:0) [ 4.407818] Run /init as init process [ 4.416285] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 mkdir: can't create directory '/bin': File exists mkdir: can't create directory '/dev': File exists /init: line 25: can't create /proc/sys/kernel/hotplug: nonexistent directory mdev: unknown user/group 'root:uucp' on line 34 Attempt to mount partitions: /usr/system /usr/data Mounting partitions from: /dev/mmcblk0 [ 4.912251] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: (null) [ 4.932285] EXT4-fs (mmcblk0p13): recovery complete [ 4.932321] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null) / # [ 5.288283] random: fast init done / # cat /proc/version Linux version 5.6.0-rc1-00002-g6be01ed870a2-dirty (frowand@xps8900) (gcc version 4.6.x-google 20120106 (prerelease) (GCC)) #4 SMP PREEMPT Wed Feb 19 18:23:24 CST 2020
