[PATCH v13 09/11] iio: afe: rescale: add temperature transducers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A temperature transducer is a device that converts a thermal quantity
into any other physical quantity. This patch adds support for
temperature to voltage (like the LTC2997) and temperature to current
(like the AD590) linear transducers.
In both cases these are assumed to be connected to a voltage ADC.

Signed-off-by: Liam Beguin <liambeguin@xxxxxxxxx>
Reviewed-by: Peter Rosin <peda@xxxxxxxxxx>
---
 drivers/iio/afe/iio-rescale.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index ae71a545c7e0..706d2d224777 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -436,11 +436,37 @@ static int rescale_temp_sense_rtd_props(struct device *dev,
 	return 0;
 }
 
+static int rescale_temp_transducer_props(struct device *dev,
+					 struct rescale *rescale)
+{
+	s32 offset = 0;
+	s32 sense = 1;
+	s32 alpha;
+	int ret;
+
+	device_property_read_u32(dev, "sense-offset-millicelsius", &offset);
+	device_property_read_u32(dev, "sense-resistor-ohms", &sense);
+	ret = device_property_read_u32(dev, "alpha-ppm-per-celsius", &alpha);
+	if (ret) {
+		dev_err(dev, "failed to read alpha-ppm-per-celsius: %d\n", ret);
+		return ret;
+	}
+
+	rescale->numerator = MEGA;
+	rescale->denominator = alpha * sense;
+
+	rescale->offset = div_s64((s64)offset * rescale->denominator,
+				  rescale->numerator);
+
+	return 0;
+}
+
 enum rescale_variant {
 	CURRENT_SENSE_AMPLIFIER,
 	CURRENT_SENSE_SHUNT,
 	VOLTAGE_DIVIDER,
 	TEMP_SENSE_RTD,
+	TEMP_TRANSDUCER,
 };
 
 static const struct rescale_cfg rescale_cfg[] = {
@@ -460,6 +486,10 @@ static const struct rescale_cfg rescale_cfg[] = {
 		.type = IIO_TEMP,
 		.props = rescale_temp_sense_rtd_props,
 	},
+	[TEMP_TRANSDUCER] = {
+		.type = IIO_TEMP,
+		.props = rescale_temp_transducer_props,
+	},
 };
 
 static const struct of_device_id rescale_match[] = {
@@ -471,6 +501,8 @@ static const struct of_device_id rescale_match[] = {
 	  .data = &rescale_cfg[VOLTAGE_DIVIDER], },
 	{ .compatible = "temperature-sense-rtd",
 	  .data = &rescale_cfg[TEMP_SENSE_RTD], },
+	{ .compatible = "temperature-transducer",
+	  .data = &rescale_cfg[TEMP_TRANSDUCER], },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, rescale_match);
-- 
2.35.1.4.g5d01301f2b86




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux