On Mon, Jan 17, 2022 at 06:06:39PM -0500, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
>
> Add interrupt controller mode for the pca6416 on i.MX8MP EVK board's.
>
> Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
It doesn't apply to my branch. Could you rebase?
Shawn
> ---
> arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 66437b659f3a..00e1e1342162 100755
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -526,6 +526,12 @@ pca6416: gpio@20 {
> reg = <0x20>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pca6416_int>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
> };
>
> codec: wm8960@1a {
> @@ -1209,6 +1215,12 @@ pinctrl_csi_mclk: csi_mclk_grp {
> MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2 0x59
> >;
> };
> +
> + pinctrl_pca6416_int: pca6416_int_grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* Input pull-up. */
> + >;
> + };
> };
>
> &vpu_g1 {
> --
> 2.30.2
>
