From: Yunus Bas <y.bas@xxxxxxxxx>
The proper way to handle partly used MFD devices are to describe all MFD
subdevices in the devicetree and disable the not used ones. This
suppresses any warnings that may arise as a result.
Signed-off-by: Yunus Bas <y.bas@xxxxxxxxx>
Signed-off-by: Andrej Picej <andrej.picej@xxxxxxxxx>
---
Changes in v2:
- use ARM: dts: imx6qdl-phytec: ... as subject prefix
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +++++
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 10 ++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index c6ec71f6f034..1f2ba6f6254e 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -213,6 +213,11 @@ da9063_rtc: rtc {
da9063_wdog: watchdog {
compatible = "dlg,da9063-watchdog";
};
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 94b254bfd054..28a805384668 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -116,6 +116,16 @@ watchdog {
dlg,use-sw-pm;
};
+ thermal {
+ compatible = "dlg,da9062-thermal";
+ status = "disabled";
+ };
+
+ gpio {
+ compatible = "dlg,da9062-gpio";
+ status = "disabled";
+ };
+
regulators {
vdd_arm: buck1 {
regulator-name = "vdd_arm";
--
2.25.1
