LLCC HW version info is made up of major, branch, minor and echo version bits each of which are 8bits. Several features in newer LLCC HW are based on the full version rather than just major or minor versions such as write-subcache enable which is applicable for versions greater than v2.0.0.0 and upcoming write-subcache cacheable for SM8450 SoC which is only present in versions v2.1.0.0 and later, so it makes it easier and cleaner to just directly compare with the full version than adding additional major/branch/ minor/echo version checks. So remove the earlier major version check and add full version check for those features. Signed-off-by: Sai Prakash Ranjan <quic_saipraka@xxxxxxxxxxx> --- drivers/soc/qcom/llcc-qcom.c | 9 ++++----- include/linux/soc/qcom/llcc-qcom.h | 4 ++-- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index b3a34f117a7c..a06764f16023 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -37,7 +37,6 @@ #define CACHE_LINE_SIZE_SHIFT 6 #define LLCC_COMMON_HW_INFO 0x00030000 -#define LLCC_MAJOR_VERSION_MASK GENMASK(31, 24) #define LLCC_COMMON_STATUS0 0x0003000c #define LLCC_LB_CNT_MASK GENMASK(31, 28) @@ -55,6 +54,8 @@ #define BANK_OFFSET_STRIDE 0x80000 +#define LLCC_VERSION_2_0_0_0 0x02000000 + /** * struct llcc_slice_config - Data associated with the llcc slice * @usecase_id: Unique id for the client's use case @@ -504,7 +505,7 @@ static int _qcom_llcc_cfg_program(const struct llcc_slice_config *config, return ret; } - if (drv_data->major_version == 2) { + if (drv_data->version >= LLCC_VERSION_2_0_0_0) { u32 wren; wren = config->write_scid_en << config->slice_id; @@ -598,13 +599,11 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; } - /* Extract major version of the IP */ + /* Extract version of the IP */ ret = regmap_read(drv_data->bcast_regmap, LLCC_COMMON_HW_INFO, &version); if (ret) goto err; - drv_data->major_version = FIELD_GET(LLCC_MAJOR_VERSION_MASK, version); - ret = regmap_read(drv_data->regmap, LLCC_COMMON_STATUS0, &num_banks); if (ret) diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h index 9e8fd92c96b7..beecf00b707d 100644 --- a/include/linux/soc/qcom/llcc-qcom.h +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -83,7 +83,7 @@ struct llcc_edac_reg_data { * @bitmap: Bit map to track the active slice ids * @offsets: Pointer to the bank offsets array * @ecc_irq: interrupt for llcc cache error detection and reporting - * @major_version: Indicates the LLCC major version + * @version: Indicates the LLCC version */ struct llcc_drv_data { struct regmap *regmap; @@ -96,7 +96,7 @@ struct llcc_drv_data { unsigned long *bitmap; u32 *offsets; int ecc_irq; - u32 major_version; + u32 version; }; #if IS_ENABLED(CONFIG_QCOM_LLCC) -- 2.33.1