The GEM controllers on ZynqMP were missing some initialization steps which
are required in some cases when using SGMII mode, which uses the PS-GTR
transceivers managed by the phy-zynqmp driver.
The GEM core appears to need a hardware-level reset in order to work
properly in SGMII mode in cases where the GT reference clock was not
present at initial power-on. This can be done using a reset mapped to
the zynqmp-reset driver in the device tree.
Also, when in SGMII mode, the GEM driver needs to ensure the PHY is
initialized and powered on.
Signed-off-by: Robert Hancock <robert.hancock@xxxxxxxxxx>
---
drivers/net/ethernet/cadence/macb.h | 4 ++
drivers/net/ethernet/cadence/macb_main.c | 63 ++++++++++++++++++++++--
2 files changed, 64 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 9ddbee7de72b..f0a7d8396a4a 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -12,6 +12,7 @@
#include <linux/ptp_clock_kernel.h>
#include <linux/net_tstamp.h>
#include <linux/interrupt.h>
+#include <linux/phy/phy.h>
#if defined(CONFIG_ARCH_DMA_ADDR_T_64BIT) || defined(CONFIG_MACB_USE_HWSTAMP)
#define MACB_EXT_DESC
@@ -1291,6 +1292,9 @@ struct macb {
u32 wol;
struct macb_ptp_info *ptp_info; /* macb-ptp interface */
+
+ struct phy *sgmii_phy; /* for ZynqMP SGMII mode */
+
#ifdef MACB_EXT_DESC
uint8_t hw_dma_cap;
#endif
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index a363da928e8b..1ce20bf52f72 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -34,7 +34,9 @@
#include <linux/udp.h>
#include <linux/tcp.h>
#include <linux/iopoll.h>
+#include <linux/phy/phy.h>
#include <linux/pm_runtime.h>
+#include <linux/reset.h>
#include "macb.h"
/* This structure is only used for MACB on SiFive FU540 devices */
@@ -2739,10 +2741,14 @@ static int macb_open(struct net_device *dev)
macb_init_hw(bp);
- err = macb_phylink_connect(bp);
+ err = phy_power_on(bp->sgmii_phy);
if (err)
goto reset_hw;
+ err = macb_phylink_connect(bp);
+ if (err)
+ goto phy_off;
+
netif_tx_start_all_queues(dev);
if (bp->ptp_info)
@@ -2750,6 +2756,9 @@ static int macb_open(struct net_device *dev)
return 0;
+phy_off:
+ phy_power_off(bp->sgmii_phy);
+
reset_hw:
macb_reset_hw(bp);
for (q = 0, queue = bp->queues; q < bp->num_queues; ++q, ++queue)
@@ -2775,6 +2784,8 @@ static int macb_close(struct net_device *dev)
phylink_stop(bp->phylink);
phylink_disconnect_phy(bp->phylink);
+ phy_power_off(bp->sgmii_phy);
+
spin_lock_irqsave(&bp->lock, flags);
macb_reset_hw(bp);
netif_carrier_off(dev);
@@ -4544,13 +4555,55 @@ static const struct macb_config np4_config = {
.usrio = &macb_default_usrio,
};
+static int zynqmp_init(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct macb *bp = netdev_priv(dev);
+ int ret;
+
+ if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
+ /* Ensure PS-GTR PHY device used in SGMII mode is ready */
+ bp->sgmii_phy = devm_phy_get(&pdev->dev, "sgmii-phy");
+
+ if (IS_ERR(bp->sgmii_phy)) {
+ ret = PTR_ERR(bp->sgmii_phy);
+ dev_err_probe(&pdev->dev, ret,
+ "failed to get PS-GTR PHY\n");
+ return ret;
+ }
+
+ ret = phy_init(bp->sgmii_phy);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to init PS-GTR PHY: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ /* Fully reset GEM controller at hardware level using zynqmp-reset driver,
+ * if mapped in device tree.
+ */
+ ret = device_reset_optional(&pdev->dev);
+ if (ret) {
+ dev_err_probe(&pdev->dev, ret, "failed to reset controller");
+ phy_exit(bp->sgmii_phy);
+ return ret;
+ }
+
+ ret = macb_init(pdev);
+ if (ret)
+ phy_exit(bp->sgmii_phy);
+
+ return ret;
+}
+
static const struct macb_config zynqmp_config = {
.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
MACB_CAPS_JUMBO |
MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
.dma_burst_length = 16,
.clk_init = macb_clk_init,
- .init = macb_init,
+ .init = zynqmp_init,
.jumbo_max_len = 10240,
.usrio = &macb_default_usrio,
};
@@ -4767,7 +4820,7 @@ static int macb_probe(struct platform_device *pdev)
err = macb_mii_init(bp);
if (err)
- goto err_out_free_netdev;
+ goto err_out_phy_exit;
netif_carrier_off(dev);
@@ -4792,6 +4845,9 @@ static int macb_probe(struct platform_device *pdev)
mdiobus_unregister(bp->mii_bus);
mdiobus_free(bp->mii_bus);
+err_out_phy_exit:
+ phy_exit(bp->sgmii_phy);
+
err_out_free_netdev:
free_netdev(dev);
@@ -4813,6 +4869,7 @@ static int macb_remove(struct platform_device *pdev)
if (dev) {
bp = netdev_priv(dev);
+ phy_exit(bp->sgmii_phy);
mdiobus_unregister(bp->mii_bus);
mdiobus_free(bp->mii_bus);
--
2.31.1
