From: Reinhold Mueller <reinhold.mueller@xxxxxxxxxxx> This patchset adds support for the emtrion emCON-MX8M Mini Changes v5: [RESEND PATCH 1/2] - no changes - since v2 Acked-by: Rob Herring <robh@xxxxxxxxxx> [RESEND PATCH 2/2] - ecspi1: add cs-gpios in cs-gpios property - Reviewed-by: Fabio Estevam <festevam@xxxxxxxxx> v4: [PATCH 1/2] - no changes - since v2 Acked-by: Rob Herring <robh@xxxxxxxxxx> [PATCH 2/2] - removed reserved memory nodes - added a child node in fec for the phy reset gpios v3: [PATCH 1/2] - no changes - since v2 Acked-by: Rob Herring <robh@xxxxxxxxxx> [PATCH 2/2] - inserted hyphen in some node names - spell out regulator in some regulator nodes - order of properties - sort label node alphabetically - inserting space before node name v2: [PATCH 1/2] - no changes - Acked-by: Rob Herring <robh@xxxxxxxxxx> [PATCH 2/2] - replaced GPIO_ACTIVE_LOW by IRQ_TYPE_LEVEL_LOW v1: [PATCH 0/2] - split former patch in dts -and yaml patches [PATCH 1/2] - removing character '\t' [PATCH 2/2] - correct entry compatible in spi-flash@0 Reinhold Mueller (2): dt-bindings: arm: Add emtrion hardware emCON-MX8M Mini arm64: dts: imx8mm: Add support for emtrion emCON-MX8M Mini .../devicetree/bindings/arm/fsl.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 3 +- .../boot/dts/freescale/imx8mm-emcon-avari.dts | 23 + .../dts/freescale/imx8mm-emcon-avari.dtsi | 139 ++++ .../boot/dts/freescale/imx8mm-emcon.dtsi | 627 ++++++++++++++++++ 5 files changed, 792 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi -- 2.20.1
