On 26. 01. 22 10:27, Shawn Guo wrote:
On Thu, Dec 16, 2021 at 12:55:29PM +0100, Andrej Picej wrote:
From: Yunus Bas <y.bas@xxxxxxxxx>
The proper way to handle partly used MFD devices are to describe all MFD
subdevices in the devicetree and disable the not used ones. This
suppresses any warnings that may arise as a result.
Signed-off-by: Yunus Bas <y.bas@xxxxxxxxx>
Signed-off-by: Andrej Picej <andrej.picej@xxxxxxxxx>
Use subject prefix like
ARM: dts: imx6qdl-phytec: ...
Shawn
Will send a v2 with this change.
Thanks.
Andrej
---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 5 +++++
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi | 10 ++++++++++
2 files changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 2ec154756bbc..3590f439adf5 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -213,6 +213,11 @@ pmic_rtc: rtc {
da9063_wdog: wdt {
compatible = "dlg,da9063-watchdog";
};
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 94b254bfd054..28a805384668 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -116,6 +116,16 @@ watchdog {
dlg,use-sw-pm;
};
+ thermal {
+ compatible = "dlg,da9062-thermal";
+ status = "disabled";
+ };
+
+ gpio {
+ compatible = "dlg,da9062-gpio";
+ status = "disabled";
+ };
+
regulators {
vdd_arm: buck1 {
regulator-name = "vdd_arm";
--
2.25.1
