This enabled the VOP2 display controller along with hdmi and the required port routes which is enough to get a picture out of the hdmi port of the board. Changes since v3: - Fix HDMI connector type Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> --- .../boot/dts/rockchip/rk3568-evb1-v10.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts index 184e2aa2416a..9a669240e49a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts @@ -7,6 +7,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / { @@ -33,6 +34,17 @@ dc_12v: dc-12v { regulator-max-microvolt = <12000000>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + vcc3v3_sys: vcc3v3-sys { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -106,6 +118,12 @@ &gmac1m1_rgmii_clk status = "okay"; }; +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -390,3 +408,33 @@ &sdmmc0 { &uart2 { status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint@0 { + reg = <0>; + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&vp0 { + vp0_out_hdmi: endpoint@RK3568_VOP2_EP_HDMI { + reg = <RK3568_VOP2_EP_HDMI>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; -- 2.30.2