On Thu, Dec 16, 2021 at 08:12:27AM -0800, Tim Harvey wrote:
> Since commit 99aa29932271 ("arm64: dts: imx8mn: Enable GPU")
> imx8mn-venice-gw7902 will hang during kernel init because it uses
> a MIMX8MN5CVTI which does not have a GPU.
I do not quite follow on this. i.MX8MN integrates a GPU, and
MIMX8MN5CVTI is built on i.MX8MN, correct? If so, how comes
MIMX8MN5CVTI doesn't have a GPU?
>
> Disable pgc_gpumix to work around this. We also disable the GPU devices
> that depend on the gpumix power domain and pgc_gpu to avoid them staying
> in a probe deferred state forever.
Is this an indication that GPU should be disabled in imx8mn.dtsi and
enabled board by board?
Shawn
>
> Cc: Adam Ford <aford173@xxxxxxxxx>
> Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> ---
> .../boot/dts/freescale/imx8mn-venice-gw7902.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
> index 236f425e1570..2d58005d20e4 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
> @@ -220,6 +220,10 @@
> };
> };
>
> +&disp_blk_ctrl {
> + status = "disabled";
> +};
> +
> /* off-board header */
> &ecspi2 {
> pinctrl-names = "default";
> @@ -251,6 +255,10 @@
> };
> };
>
> +&gpu {
> + status = "disabled";
> +};
> +
> &i2c1 {
> clock-frequency = <100000>;
> pinctrl-names = "default";
> @@ -546,6 +554,10 @@
> status = "okay";
> };
>
> +&pgc_gpumix {
> + status = "disabled";
> +};
> +
> /* off-board header */
> &sai3 {
> pinctrl-names = "default";
> --
> 2.17.1
>
