The Cadence GEM/MACB driver now utilizes the platform-level reset on the
ZynqMP platform. Add reset definitions to the ZynqMP platform device
tree to allow this to be used.
Signed-off-by: Robert Hancock <robert.hancock@xxxxxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 74e66443e4ce..9bec3ba20c69 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -512,6 +512,8 @@ gem0: ethernet@ff0b0000 {
#stream-id-cells = <1>;
iommus = <&smmu 0x874>;
power-domains = <&zynqmp_firmware PD_ETH_0>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
+ reset-names = "gem0_rst";
};
gem1: ethernet@ff0c0000 {
@@ -526,6 +528,8 @@ gem1: ethernet@ff0c0000 {
#stream-id-cells = <1>;
iommus = <&smmu 0x875>;
power-domains = <&zynqmp_firmware PD_ETH_1>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+ reset-names = "gem1_rst";
};
gem2: ethernet@ff0d0000 {
@@ -540,6 +544,8 @@ gem2: ethernet@ff0d0000 {
#stream-id-cells = <1>;
iommus = <&smmu 0x876>;
power-domains = <&zynqmp_firmware PD_ETH_2>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
+ reset-names = "gem2_rst";
};
gem3: ethernet@ff0e0000 {
@@ -554,6 +560,8 @@ gem3: ethernet@ff0e0000 {
#stream-id-cells = <1>;
iommus = <&smmu 0x877>;
power-domains = <&zynqmp_firmware PD_ETH_3>;
+ resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
+ reset-names = "gem3_rst";
};
gpio: gpio@ff0a0000 {
--
2.31.1
