From: Chris Morgan <macromorgan@xxxxxxxxxxx> Add support for the VC4 DPI driver to utilize DPI mode 3. This is defined here as xxxRRRRRxxGGGGGGxxxBBBBB: https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#parallel-display-interface-dpi This mode is required to use the Geekworm MZP280 DPI display. Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx> Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx> --- drivers/gpu/drm/vc4/vc4_dpi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/vc4/vc4_dpi.c b/drivers/gpu/drm/vc4/vc4_dpi.c index c180eb60b..3c58ade25 100644 --- a/drivers/gpu/drm/vc4/vc4_dpi.c +++ b/drivers/gpu/drm/vc4/vc4_dpi.c @@ -173,6 +173,10 @@ static void vc4_dpi_encoder_enable(struct drm_encoder *encoder) dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_3, DPI_FORMAT); break; + case MEDIA_BUS_FMT_RGB565_1X24_CPADHI: + dpi_c |= VC4_SET_FIELD(DPI_FORMAT_16BIT_565_RGB_2, + DPI_FORMAT); + break; default: DRM_ERROR("Unknown media bus format %d\n", bus_format); break; -- 2.25.1
