Re: [RFC PATCH v2 6/7] media: imx219: Add support for multiplexed streams

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jean-Michel,

Thank you for the patch.

On Fri, Jan 21, 2022 at 09:18:09AM +0100, Jean-Michel Hautbois wrote:
> As of now, imx219 was not supporting anything more than one stream. Add
> support for embedded data, based on linux-rpi kernel, and make it work
> with multiplexed streams. We have only one source pad with two streams:
> stream 0 is the image, and stream 1 is the embedded data.
> 
> Signed-off-by: Naushir Patuck <naush@xxxxxxxxxxxxxxx>
> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@xxxxxxxxxxxxxxxx>
> 
> ---
> in v2: modified the get_format_pad function as it was not correctly
> propagating the format in case of sensor flips.
> ---
>  drivers/media/i2c/imx219.c | 452 ++++++++++++++++++++-----------------

This is too big, it bundles multiple changes together. It should be
split in multiple patches.

>  1 file changed, 241 insertions(+), 211 deletions(-)
> 
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index e10af3f74b38..d73fe6b8b2fb 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -118,6 +118,16 @@
>  #define IMX219_PIXEL_ARRAY_WIDTH	3280U
>  #define IMX219_PIXEL_ARRAY_HEIGHT	2464U
>  
> +/* Embedded metadata stream structure */
> +#define IMX219_EMBEDDED_LINE_WIDTH 16384
> +#define IMX219_NUM_EMBEDDED_LINES 1
> +
> +enum pad_types {
> +	IMAGE_PAD,
> +	METADATA_PAD,
> +	NUM_PADS
> +};

No used.

> +
>  struct imx219_reg {
>  	u16 address;
>  	u8 val;
> @@ -429,7 +439,7 @@ static const char * const imx219_supply_name[] = {
>   * - v flip
>   * - h&v flips
>   */
> -static const u32 codes[] = {
> +static const u32 imx219_mbus_formats[] = {

For instance renaming this array should go in a patch of its own.

>  	MEDIA_BUS_FMT_SRGGB10_1X10,
>  	MEDIA_BUS_FMT_SGRBG10_1X10,
>  	MEDIA_BUS_FMT_SGBRG10_1X10,
> @@ -655,62 +665,17 @@ static u32 imx219_get_format_code(struct imx219 *imx219, u32 code)
>  
>  	lockdep_assert_held(&imx219->mutex);
>  
> -	for (i = 0; i < ARRAY_SIZE(codes); i++)
> -		if (codes[i] == code)
> +	for (i = 0; i < ARRAY_SIZE(imx219_mbus_formats); i++)
> +		if (imx219_mbus_formats[i] == code)
>  			break;
>  
> -	if (i >= ARRAY_SIZE(codes))
> +	if (i >= ARRAY_SIZE(imx219_mbus_formats))
>  		i = 0;
>  
>  	i = (i & ~3) | (imx219->vflip->val ? 2 : 0) |
>  	    (imx219->hflip->val ? 1 : 0);
>  
> -	return codes[i];
> -}
> -
> -static void imx219_set_default_format(struct imx219 *imx219)
> -{
> -	struct v4l2_mbus_framefmt *fmt;
> -
> -	fmt = &imx219->fmt;
> -	fmt->code = MEDIA_BUS_FMT_SRGGB10_1X10;
> -	fmt->colorspace = V4L2_COLORSPACE_SRGB;
> -	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
> -	fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> -							  fmt->colorspace,
> -							  fmt->ycbcr_enc);
> -	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
> -	fmt->width = supported_modes[0].width;
> -	fmt->height = supported_modes[0].height;
> -	fmt->field = V4L2_FIELD_NONE;
> -}
> -
> -static int imx219_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)

So should switching from open to init_cfg. Same thing for adding support
for the V4L2 subdev active state (v4l2_subdev_init_finalize() and the
corresponding changes in the get/set format handlers). This is mainline,
not a BSP, patches must be reviewable.

> -{
> -	struct imx219 *imx219 = to_imx219(sd);
> -	struct v4l2_mbus_framefmt *try_fmt =
> -		v4l2_subdev_get_try_format(sd, fh->state, 0);
> -	struct v4l2_rect *try_crop;
> -
> -	mutex_lock(&imx219->mutex);
> -
> -	/* Initialize try_fmt */
> -	try_fmt->width = supported_modes[0].width;
> -	try_fmt->height = supported_modes[0].height;
> -	try_fmt->code = imx219_get_format_code(imx219,
> -					       MEDIA_BUS_FMT_SRGGB10_1X10);
> -	try_fmt->field = V4L2_FIELD_NONE;
> -
> -	/* Initialize try_crop rectangle. */
> -	try_crop = v4l2_subdev_get_try_crop(sd, fh->state, 0);
> -	try_crop->top = IMX219_PIXEL_ARRAY_TOP;
> -	try_crop->left = IMX219_PIXEL_ARRAY_LEFT;
> -	try_crop->width = IMX219_PIXEL_ARRAY_WIDTH;
> -	try_crop->height = IMX219_PIXEL_ARRAY_HEIGHT;
> -
> -	mutex_unlock(&imx219->mutex);
> -
> -	return 0;
> +	return imx219_mbus_formats[i];
>  }
>  
>  static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
> @@ -802,98 +767,148 @@ static const struct v4l2_ctrl_ops imx219_ctrl_ops = {
>  	.s_ctrl = imx219_set_ctrl,
>  };
>  
> -static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
> -				 struct v4l2_subdev_state *sd_state,
> -				 struct v4l2_subdev_mbus_code_enum *code)
> +static void imx219_init_formats(struct v4l2_subdev_state *state)
>  {
> -	struct imx219 *imx219 = to_imx219(sd);
> +	struct v4l2_mbus_framefmt *format;
> +
> +	format = v4l2_state_get_stream_format(state, 0, 0);
> +	format->code = imx219_mbus_formats[0];
> +	format->width = supported_modes[0].width;
> +	format->height = supported_modes[0].height;
> +	format->field = V4L2_FIELD_NONE;
> +	format->colorspace = V4L2_COLORSPACE_RAW;
> +
> +	if (state->routing.routes[1].flags & V4L2_SUBDEV_ROUTE_FL_ACTIVE) {
> +		format = v4l2_state_get_stream_format(state, 0, 1);
> +		format->code = MEDIA_BUS_FMT_METADATA_8;
> +		format->width = IMX219_EMBEDDED_LINE_WIDTH;
> +		format->height = 1;
> +		format->field = V4L2_FIELD_NONE;
> +		format->colorspace = V4L2_COLORSPACE_DEFAULT;
> +	}
> +}
>  
> -	if (code->index >= (ARRAY_SIZE(codes) / 4))
> -		return -EINVAL;
> +static int _imx219_set_routing(struct v4l2_subdev *sd,
> +			       struct v4l2_subdev_state *state)
> +{
> +	struct v4l2_subdev_route routes[] = {
> +		{
> +			.source_pad = 0,
> +			.source_stream = 0,
> +			.flags = V4L2_SUBDEV_ROUTE_FL_IMMUTABLE |
> +				 V4L2_SUBDEV_ROUTE_FL_SOURCE |
> +				 V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> +		},
> +		{
> +			.source_pad = 0,
> +			.source_stream = 1,
> +			.flags = V4L2_SUBDEV_ROUTE_FL_SOURCE |
> +				 V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> +		}
> +	};
>  
> -	mutex_lock(&imx219->mutex);
> -	code->code = imx219_get_format_code(imx219, codes[code->index * 4]);
> -	mutex_unlock(&imx219->mutex);
> +	struct v4l2_subdev_krouting routing = {
> +		.num_routes = ARRAY_SIZE(routes),
> +		.routes = routes,
> +	};
> +
> +	int ret;
> +
> +	ret = v4l2_subdev_set_routing(sd, state, &routing);
> +	if (ret)
> +		return ret;
> +
> +	imx219_init_formats(state);
>  
>  	return 0;
>  }
>  
> -static int imx219_enum_frame_size(struct v4l2_subdev *sd,
> -				  struct v4l2_subdev_state *sd_state,
> -				  struct v4l2_subdev_frame_size_enum *fse)
> +static int imx219_set_routing(struct v4l2_subdev *sd,
> +			      struct v4l2_subdev_state *state,
> +			      enum v4l2_subdev_format_whence which,
> +			      struct v4l2_subdev_krouting *routing)
>  {
> -	struct imx219 *imx219 = to_imx219(sd);
> -	u32 code;
> +	int ret;
>  
> -	if (fse->index >= ARRAY_SIZE(supported_modes))
> +	if (routing->num_routes == 0 || routing->num_routes > 2)
>  		return -EINVAL;
>  
> -	mutex_lock(&imx219->mutex);
> -	code = imx219_get_format_code(imx219, fse->code);
> -	mutex_unlock(&imx219->mutex);
> -	if (fse->code != code)
> -		return -EINVAL;
> +	v4l2_subdev_lock_state(state);
>  
> -	fse->min_width = supported_modes[fse->index].width;
> -	fse->max_width = fse->min_width;
> -	fse->min_height = supported_modes[fse->index].height;
> -	fse->max_height = fse->min_height;
> +	ret = _imx219_set_routing(sd, state);
>  
> -	return 0;
> +	v4l2_subdev_unlock_state(state);
> +
> +	return ret;
>  }
>  
> -static void imx219_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
> +static int imx219_init_cfg(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_state *state)
>  {
> -	fmt->colorspace = V4L2_COLORSPACE_SRGB;
> -	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
> -	fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
> -							  fmt->colorspace,
> -							  fmt->ycbcr_enc);
> -	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
> +	int ret;
> +
> +	v4l2_subdev_lock_state(state);
> +
> +	ret = _imx219_set_routing(sd, state);
> +
> +	v4l2_subdev_unlock_state(state);
> +
> +	return ret;
>  }
>  
> -static void imx219_update_pad_format(struct imx219 *imx219,
> -				     const struct imx219_mode *mode,
> -				     struct v4l2_subdev_format *fmt)
> +static int imx219_enum_mbus_code(struct v4l2_subdev *sd,
> +				 struct v4l2_subdev_state *sd_state,
> +				 struct v4l2_subdev_mbus_code_enum *code)
>  {
> -	fmt->format.width = mode->width;
> -	fmt->format.height = mode->height;
> -	fmt->format.field = V4L2_FIELD_NONE;
> -	imx219_reset_colorspace(&fmt->format);
> +	if (code->index >= ARRAY_SIZE(imx219_mbus_formats))
> +		return -EINVAL;
> +
> +	code->code = imx219_mbus_formats[code->index];
> +
> +	return 0;
>  }
>  
> -static int __imx219_get_pad_format(struct imx219 *imx219,
> -				   struct v4l2_subdev_state *sd_state,
> -				   struct v4l2_subdev_format *fmt)
> +static int imx219_enum_frame_size(struct v4l2_subdev *sd,
> +				  struct v4l2_subdev_state *sd_state,
> +				  struct v4l2_subdev_frame_size_enum *fse)
>  {
> -	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> -		struct v4l2_mbus_framefmt *try_fmt =
> -			v4l2_subdev_get_try_format(&imx219->sd, sd_state,
> -						   fmt->pad);
> -		/* update the code which could change due to vflip or hflip: */
> -		try_fmt->code = imx219_get_format_code(imx219, try_fmt->code);
> -		fmt->format = *try_fmt;
> +	unsigned int i;
> +
> +	if (fse->stream == 0) {
> +		for (i = 0; i < ARRAY_SIZE(imx219_mbus_formats); ++i) {
> +			if (imx219_mbus_formats[i] == fse->code)
> +				break;
> +		}
> +
> +		if (i == ARRAY_SIZE(imx219_mbus_formats))
> +			return -EINVAL;
> +
> +		if (fse->index >= ARRAY_SIZE(supported_modes))
> +			return -EINVAL;
> +
> +		fse->min_width  = supported_modes[fse->index].width;
> +		fse->max_width  = fse->min_width;
> +		fse->max_height = supported_modes[fse->index].height;
> +		fse->min_height = fse->max_height;
>  	} else {
> -		imx219_update_pad_format(imx219, imx219->mode, fmt);
> -		fmt->format.code = imx219_get_format_code(imx219,
> -							  imx219->fmt.code);
> +		if (fse->code != MEDIA_BUS_FMT_METADATA_8)
> +			return -EINVAL;
> +
> +		fse->min_width = IMX219_EMBEDDED_LINE_WIDTH;
> +		fse->max_width = fse->min_width;
> +		fse->min_height = IMX219_NUM_EMBEDDED_LINES;
> +		fse->max_height = fse->min_height;
>  	}
>  
>  	return 0;
>  }
>  
> -static int imx219_get_pad_format(struct v4l2_subdev *sd,
> -				 struct v4l2_subdev_state *sd_state,
> -				 struct v4l2_subdev_format *fmt)
> +static void imx219_update_metadata_pad_format(struct v4l2_subdev_format *fmt)
>  {
> -	struct imx219 *imx219 = to_imx219(sd);
> -	int ret;
> -
> -	mutex_lock(&imx219->mutex);
> -	ret = __imx219_get_pad_format(imx219, sd_state, fmt);
> -	mutex_unlock(&imx219->mutex);
> -
> -	return ret;
> +	fmt->format.width = IMX219_EMBEDDED_LINE_WIDTH;
> +	fmt->format.height = IMX219_NUM_EMBEDDED_LINES;
> +	fmt->format.code = MEDIA_BUS_FMT_METADATA_8;
> +	fmt->format.field = V4L2_FIELD_NONE;
>  }
>  
>  static int imx219_set_pad_format(struct v4l2_subdev *sd,
> @@ -901,82 +916,91 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
>  				 struct v4l2_subdev_format *fmt)
>  {
>  	struct imx219 *imx219 = to_imx219(sd);
> +	struct i2c_client *client = v4l2_get_subdevdata(&imx219->sd);
>  	const struct imx219_mode *mode;
> -	struct v4l2_mbus_framefmt *framefmt;
> -	int exposure_max, exposure_def, hblank;
> +	struct v4l2_mbus_framefmt *format;
>  	unsigned int i;
> +	int ret = 0;
> +	int exposure_max, exposure_def, hblank;
>  
> -	mutex_lock(&imx219->mutex);
> +	if (fmt->pad != 0) {
> +		dev_err(&client->dev, "%s Could not get pad %d\n", __func__,
> +			fmt->pad);
> +		return -EINVAL;
> +	}
>  
> -	for (i = 0; i < ARRAY_SIZE(codes); i++)
> -		if (codes[i] == fmt->format.code)
> +	if (fmt->stream == 1) {
> +		/* Only one embedded data mode is supported */
> +		imx219_update_metadata_pad_format(fmt);
> +		return 0;
> +	}
> +
> +	if (fmt->stream != 0)
> +		return -EINVAL;
> +
> +	/*
> +	 * Validate the media bus code, defaulting to the first one if the
> +	 * requested code isn't supported.
> +	 */
> +	for (i = 0; i < ARRAY_SIZE(imx219_mbus_formats); ++i) {
> +		if (imx219_mbus_formats[i] == fmt->format.code)
>  			break;
> -	if (i >= ARRAY_SIZE(codes))
> -		i = 0;
> +	}
>  
> -	/* Bayer order varies with flips */
> -	fmt->format.code = imx219_get_format_code(imx219, codes[i]);
> +	if (i >= ARRAY_SIZE(imx219_mbus_formats))
> +		i = 0;
>  
>  	mode = v4l2_find_nearest_size(supported_modes,
>  				      ARRAY_SIZE(supported_modes),
>  				      width, height,
> -				      fmt->format.width, fmt->format.height);
> -	imx219_update_pad_format(imx219, mode, fmt);
> -	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> -		framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
> -		*framefmt = fmt->format;
> -	} else if (imx219->mode != mode ||
> -		   imx219->fmt.code != fmt->format.code) {
> -		imx219->fmt = fmt->format;
> -		imx219->mode = mode;
> -		/* Update limits and set FPS to default */
> -		__v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
> -					 IMX219_VTS_MAX - mode->height, 1,
> -					 mode->vts_def - mode->height);
> -		__v4l2_ctrl_s_ctrl(imx219->vblank,
> -				   mode->vts_def - mode->height);
> -		/* Update max exposure while meeting expected vblanking */
> -		exposure_max = mode->vts_def - 4;
> -		exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
> -			exposure_max : IMX219_EXPOSURE_DEFAULT;
> -		__v4l2_ctrl_modify_range(imx219->exposure,
> -					 imx219->exposure->minimum,
> -					 exposure_max, imx219->exposure->step,
> -					 exposure_def);
> -		/*
> -		 * Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank
> -		 * depends on mode->width only, and is not changeble in any
> -		 * way other than changing the mode.
> -		 */
> -		hblank = IMX219_PPL_DEFAULT - mode->width;
> -		__v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1,
> -					 hblank);
> -	}
> +				      fmt->format.width,
> +				      fmt->format.height);
>  
> -	mutex_unlock(&imx219->mutex);
> +	v4l2_subdev_lock_state(sd_state);
>  
> -	return 0;
> -}
> +	/* Update the stored format and return it. */
> +	format = v4l2_state_get_stream_format(sd_state, fmt->pad, fmt->stream);
>  
> -static int imx219_set_framefmt(struct imx219 *imx219)
> -{
> -	switch (imx219->fmt.code) {
> -	case MEDIA_BUS_FMT_SRGGB8_1X8:
> -	case MEDIA_BUS_FMT_SGRBG8_1X8:
> -	case MEDIA_BUS_FMT_SGBRG8_1X8:
> -	case MEDIA_BUS_FMT_SBGGR8_1X8:
> -		return imx219_write_regs(imx219, raw8_framefmt_regs,
> -					ARRAY_SIZE(raw8_framefmt_regs));
> -
> -	case MEDIA_BUS_FMT_SRGGB10_1X10:
> -	case MEDIA_BUS_FMT_SGRBG10_1X10:
> -	case MEDIA_BUS_FMT_SGBRG10_1X10:
> -	case MEDIA_BUS_FMT_SBGGR10_1X10:
> -		return imx219_write_regs(imx219, raw10_framefmt_regs,
> -					ARRAY_SIZE(raw10_framefmt_regs));
> +	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE && imx219->streaming) {
> +		ret = -EBUSY;
> +		goto done;
>  	}
>  
> -	return -EINVAL;
> +	/* Bayer order varies with flips */
> +	fmt->format.code = imx219_get_format_code(imx219, imx219_mbus_formats[i]);
> +	fmt->format = *format;
> +
> +	/* Update limits and set FPS to default */
> +	__v4l2_ctrl_modify_range(imx219->vblank,
> +				 IMX219_VBLANK_MIN,
> +				 IMX219_VTS_MAX - mode->height,
> +				 1,
> +				 mode->vts_def - mode->height);
> +	__v4l2_ctrl_s_ctrl(imx219->vblank, mode->vts_def - mode->height);
> +	/*
> +	 * Update max exposure while meeting
> +	 * expected vblanking
> +	 */
> +	exposure_max = mode->vts_def - 4;
> +	exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
> +			exposure_max : IMX219_EXPOSURE_DEFAULT;
> +	__v4l2_ctrl_modify_range(imx219->exposure,
> +				 imx219->exposure->minimum,
> +				 exposure_max,
> +				 imx219->exposure->step,
> +				 exposure_def);
> +	/*
> +	 * Currently PPL is fixed to IMX219_PPL_DEFAULT, so
> +	 * hblank depends on mode->width only, and is not
> +	 * changeble in any way other than changing the mode.
> +	 */
> +	hblank = IMX219_PPL_DEFAULT - mode->width;
> +	__v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1, hblank);
> +
> +done:
> +	v4l2_subdev_unlock_state(sd_state);
> +
> +	return ret;
>  }
>  
>  static const struct v4l2_rect *
> @@ -1037,9 +1061,11 @@ static int imx219_start_streaming(struct imx219 *imx219)
>  	const struct imx219_reg_list *reg_list;
>  	int ret;
>  
> -	ret = pm_runtime_resume_and_get(&client->dev);
> -	if (ret < 0)
> +	ret = pm_runtime_get_sync(&client->dev);
> +	if (ret < 0) {
> +		pm_runtime_put_noidle(&client->dev);
>  		return ret;
> +	}
>  
>  	/* Apply default values of current mode */
>  	reg_list = &imx219->mode->reg_list;
> @@ -1049,13 +1075,6 @@ static int imx219_start_streaming(struct imx219 *imx219)
>  		goto err_rpm_put;
>  	}
>  
> -	ret = imx219_set_framefmt(imx219);
> -	if (ret) {
> -		dev_err(&client->dev, "%s failed to set frame format: %d\n",
> -			__func__, ret);
> -		goto err_rpm_put;
> -	}
> -
>  	/* Apply customized values from user */
>  	ret =  __v4l2_ctrl_handler_setup(imx219->sd.ctrl_handler);
>  	if (ret)
> @@ -1133,21 +1152,22 @@ static int imx219_set_stream(struct v4l2_subdev *sd, int enable)
>  /* Power/clock management functions */
>  static int imx219_power_on(struct device *dev)
>  {
> -	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
>  	struct imx219 *imx219 = to_imx219(sd);
>  	int ret;
>  
>  	ret = regulator_bulk_enable(IMX219_NUM_SUPPLIES,
>  				    imx219->supplies);
>  	if (ret) {
> -		dev_err(dev, "%s: failed to enable regulators\n",
> +		dev_err(&client->dev, "%s: failed to enable regulators\n",
>  			__func__);
>  		return ret;
>  	}
>  
>  	ret = clk_prepare_enable(imx219->xclk);
>  	if (ret) {
> -		dev_err(dev, "%s: failed to enable clock\n",
> +		dev_err(&client->dev, "%s: failed to enable clock\n",
>  			__func__);
>  		goto reg_off;
>  	}
> @@ -1166,7 +1186,8 @@ static int imx219_power_on(struct device *dev)
>  
>  static int imx219_power_off(struct device *dev)
>  {
> -	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
>  	struct imx219 *imx219 = to_imx219(sd);
>  
>  	gpiod_set_value_cansleep(imx219->reset_gpio, 0);
> @@ -1178,7 +1199,8 @@ static int imx219_power_off(struct device *dev)
>  
>  static int __maybe_unused imx219_suspend(struct device *dev)
>  {
> -	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
>  	struct imx219 *imx219 = to_imx219(sd);
>  
>  	if (imx219->streaming)
> @@ -1189,7 +1211,8 @@ static int __maybe_unused imx219_suspend(struct device *dev)
>  
>  static int __maybe_unused imx219_resume(struct device *dev)
>  {
> -	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
>  	struct imx219 *imx219 = to_imx219(sd);
>  	int ret;
>  
> @@ -1255,11 +1278,13 @@ static const struct v4l2_subdev_video_ops imx219_video_ops = {
>  };
>  
>  static const struct v4l2_subdev_pad_ops imx219_pad_ops = {
> -	.enum_mbus_code = imx219_enum_mbus_code,
> -	.get_fmt = imx219_get_pad_format,
> -	.set_fmt = imx219_set_pad_format,
> -	.get_selection = imx219_get_selection,
> -	.enum_frame_size = imx219_enum_frame_size,
> +	.init_cfg		= imx219_init_cfg,
> +	.enum_mbus_code		= imx219_enum_mbus_code,
> +	.get_fmt		= v4l2_subdev_get_fmt,
> +	.set_fmt		= imx219_set_pad_format,
> +	.get_selection		= imx219_get_selection,
> +	.set_routing		= imx219_set_routing,
> +	.enum_frame_size	= imx219_enum_frame_size,
>  };
>  
>  static const struct v4l2_subdev_ops imx219_subdev_ops = {
> @@ -1268,10 +1293,6 @@ static const struct v4l2_subdev_ops imx219_subdev_ops = {
>  	.pad = &imx219_pad_ops,
>  };
>  
> -static const struct v4l2_subdev_internal_ops imx219_internal_ops = {
> -	.open = imx219_open,
> -};
> -
>  /* Initialize control handlers */
>  static int imx219_init_controls(struct imx219 *imx219)
>  {
> @@ -1446,6 +1467,7 @@ static int imx219_check_hwcfg(struct device *dev)
>  static int imx219_probe(struct i2c_client *client)
>  {
>  	struct device *dev = &client->dev;
> +	struct v4l2_subdev *sd;
>  	struct imx219 *imx219;
>  	int ret;
>  
> @@ -1453,7 +1475,8 @@ static int imx219_probe(struct i2c_client *client)
>  	if (!imx219)
>  		return -ENOMEM;
>  
> -	v4l2_i2c_subdev_init(&imx219->sd, client, &imx219_subdev_ops);
> +	sd = &imx219->sd;
> +	v4l2_i2c_subdev_init(sd, client, &imx219_subdev_ops);
>  
>  	/* Check the hardware configuration in device tree */
>  	if (imx219_check_hwcfg(dev))
> @@ -1520,27 +1543,29 @@ static int imx219_probe(struct i2c_client *client)
>  		goto error_power_off;
>  
>  	/* Initialize subdev */
> -	imx219->sd.internal_ops = &imx219_internal_ops;
> -	imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> -			    V4L2_SUBDEV_FL_HAS_EVENTS;
> -	imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
> +		     V4L2_SUBDEV_FL_HAS_EVENTS |
> +		     V4L2_SUBDEV_FL_MULTIPLEXED;
>  
> -	/* Initialize source pad */
> +	/* Initialize the media entity. */
>  	imx219->pad.flags = MEDIA_PAD_FL_SOURCE;
> -
> -	/* Initialize default format */
> -	imx219_set_default_format(imx219);
> -
> -	ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad);
> +	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
> +	ret = media_entity_pads_init(&sd->entity, 1, &imx219->pad);
>  	if (ret) {
>  		dev_err(dev, "failed to init entity pads: %d\n", ret);
>  		goto error_handler_free;
>  	}
>  
> -	ret = v4l2_async_register_subdev_sensor(&imx219->sd);
> +	ret = v4l2_subdev_init_finalize(sd);
> +	if (ret) {
> +		dev_err(dev, "failed to finalize sensor init: %d\n", ret);
> +		goto error_media_entity;
> +	}
> +
> +	ret = v4l2_async_register_subdev_sensor(sd);
>  	if (ret < 0) {
>  		dev_err(dev, "failed to register sensor sub-device: %d\n", ret);
> -		goto error_media_entity;
> +		goto error_free_state;
>  	}
>  
>  	/* Enable runtime PM and turn off the device */
> @@ -1550,6 +1575,8 @@ static int imx219_probe(struct i2c_client *client)
>  
>  	return 0;
>  
> +error_free_state:
> +	v4l2_subdev_cleanup(sd);
>  error_media_entity:
>  	media_entity_cleanup(&imx219->sd.entity);
>  
> @@ -1568,6 +1595,9 @@ static int imx219_remove(struct i2c_client *client)
>  	struct imx219 *imx219 = to_imx219(sd);
>  
>  	v4l2_async_unregister_subdev(sd);
> +
> +	v4l2_subdev_cleanup(sd);
> +
>  	media_entity_cleanup(&sd->entity);
>  	imx219_free_controls(imx219);
>  

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux