Re: [PATCH] arm64: dts: renesas: ulcb-kf: add KF HDMI output

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Nikita,

On Sat, Dec 25, 2021 at 12:54 PM Nikita Yushchenko
<nikita.yoush@xxxxxxxxxxxxxxxxxx> wrote:
> This patch adds nodes needed to enable DRM video output over HDMI
> connector located on KF board.
>
> Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> @@ -51,6 +51,31 @@ wlan_en: regulator-wlan_en {
>                 startup-delay-us = <70000>;
>                 enable-active-high;
>         };
> +
> +       hdmi_1v8: regulator-hdmi-1v8 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "hdmi-1v8";
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <1800000>;
> +       };
> +
> +       hdmi_3v3: regulator-hdmi-3v3 {
> +               compatible = "regulator-fixed";
> +               regulator-name = "hdmi-3v3";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +       };
> +
> +       hdmi1-out {

Sort order.

> +               compatible = "hdmi-connector";
> +               type = "a";
> +
> +               port {
> +                       hdmi1_con: endpoint {
> +                               remote-endpoint = <&adv7513_out>;
> +                       };
> +               };
> +       };
>  };
>
>  &can0 {

> @@ -236,6 +313,10 @@ gpio_exp_77: gpio@77 {
>         };
>  };
>
> +&du_out_rgb {

Sort order.

> +       remote-endpoint = <&adv7513_in>;
> +};
> +
>  &ohci0 {
>         dr_mode = "otg";
>         status = "okay";
> @@ -289,6 +370,18 @@ usb0_pins: usb0 {
>                 groups = "usb0";
>                 function = "usb0";
>         };
> +
> +       hdmi1_pins: hdmi1 {
> +               du {

More sort order.

> +                       groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp";
> +                       function = "du";
> +               };
> +
> +               adv7513-interrupt {
> +                       pins = "GP_2_14";
> +                       bias-pull-up;
> +               };
> +       };
>  };

The rest looks good to me.
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
i.e. will queue in renesas-devel for v5.18 with the sort order fixed.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux