Re: [PATCH v2 03/15] dt-bindings: clock: Document qcom,gcc-ipq8064 binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 21 Jan 2022 00:20:16 +0100, Ansuel Smith wrote:
> Document qcom,gcc-ipq8064 binding needed to declare pxo and cxo source
> clocks. The gcc node is also used by the tsens driver, already documented,
> to get the calib nvmem cells and the base reg from gcc.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@xxxxxxxxx>
> ---
>  .../bindings/clock/qcom,gcc-ipq8064.yaml      | 70 +++++++++++++++++++
>  1 file changed, 70 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.example.dt.yaml: clock-controller@900000: compatible: ['qcom,gcc-ipq8064', 'syscon'] is too long
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.example.dt.yaml: clock-controller@900000: compatible: Additional items are not allowed ('syscon' was unexpected)
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.example.dt.yaml: clock-controller@900000: 'clock-names', 'clocks', 'thermal-sensor' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/clock/qcom,gcc.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1582346

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux