Maxim <bigunclemax@xxxxxxxxx> writes: > From: Maxim Kiselev <bigunclemax@xxxxxxxxx> > > On board rev A, the network interface labels for the switch ports > written on the front panel are different than on rev B and later. > > This patch fixes network interface names for the switch ports according > to labels that are written on the front panel of the board rev B. > They start from ETH3 and end at ETH10. > > This patch also introduces a separate device tree for rev A. > The main device tree is supposed to cover rev B and later. > > Signed-off-by: Maxim Kiselev <bigunclemax@xxxxxxxxx> > Reviewed-by: Maxim Kochetkov <fido_max@xxxxxxxx> > --- > arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 30 ++++++++++++++++++++ > arch/powerpc/boot/dts/fsl/t1040rdb.dts | 8 +++--- > 2 files changed, 34 insertions(+), 4 deletions(-) > create mode 100644 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts I applied this but it generated errors, you should have got some reports from the kernel build robot. cheers
