On Mon, 2022-01-17 at 11:50 +0100, AngeloGioacchino Del Regno wrote:
> Il 17/01/22 08:12, Axe Yang ha scritto:
> > Add support for eint IRQ when MSDC is used as an SDIO host. This
> > feature requires SDIO device support async IRQ function. With this
> > feature, SDIO host can be awakened by SDIO card in suspend state,
> > without additional pin.
> >
> > MSDC driver will time-share the SDIO DAT1 pin. During suspend, MSDC
> > turn off clock and switch SDIO DAT1 pin to GPIO mode. And during
> > resume, switch GPIO function back to DAT1 mode then turn on clock.
> >
> > Some device tree property should be added or modified in MSDC node
> > to support SDIO eint IRQ. Pinctrls named state_dat1 and state_eint
> > are mandatory. And cap-sdio-async-irq flag is necessary since this
> > feature depends on asynchronous interrupt:
> > &mmcX {
> > ...
> > pinctrl-names = "default", "state_uhs",
> > "state_eint",
> > "state_dat1";
> > ...
> > pinctrl-2 = <&mmc2_pins_eint>;
> > pinctrl-3 = <&mmc2_pins_dat1>;
> > ...
> > cap-sdio-async-irq;
> > ...
> > };
> >
> > Signed-off-by: Axe Yang <axe.yang@xxxxxxxxxxxx>
> > Signed-off-by: Yong Mao <yong.mao@xxxxxxxxxxxx>
> > ---
> > drivers/mmc/host/mtk-sd.c | 125
> > +++++++++++++++++++++++++++++++++++---
> > 1 file changed, 117 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> > index 65037e1d7723..cbdbcce99fd9 100644
> > --- a/drivers/mmc/host/mtk-sd.c
> > +++ b/drivers/mmc/host/mtk-sd.c
> > @@ -1,6 +1,6 @@
> > // SPDX-License-Identifier: GPL-2.0-only
> > /*
> > - * Copyright (c) 2014-2015 MediaTek Inc.
> > + * Copyright (c) 2022 MediaTek Inc.
> > * Author: Chaotian.Jing <chaotian.jing@xxxxxxxxxxxx>
> > */
> >
> > @@ -9,6 +9,7 @@
> > #include <linux/clk.h>
> > #include <linux/delay.h>
> > #include <linux/dma-mapping.h>
> > +#include <linux/gpio/consumer.h>
> > #include <linux/iopoll.h>
> > #include <linux/ioport.h>
> > #include <linux/irq.h>
> > @@ -440,8 +441,12 @@ struct msdc_host {
> > struct pinctrl *pinctrl;
> > struct pinctrl_state *pins_default;
> > struct pinctrl_state *pins_uhs;
> > + struct pinctrl_state *pins_eint;
> > + struct pinctrl_state *pins_dat1;
> > struct delayed_work req_timeout;
> > int irq; /* host interrupt */
> > + int eint_irq; /* device interrupt */
> > + int sdio_irq_cnt; /* irq enable cnt */
> > struct reset_control *reset;
> >
> > struct clk *src_clk; /* msdc source clock */
> > @@ -465,6 +470,7 @@ struct msdc_host {
> > bool hs400_tuning; /* hs400 mode online tuning */
> > bool internal_cd; /* Use internal card-detect logic */
> > bool cqhci; /* support eMMC hw cmdq */
> > + bool sdio_eint_ready; /* Ready to support SDIO eint
> > interrupt */
> > struct msdc_save_para save_para; /* used when gate HCLK */
> > struct msdc_tune_para def_tune_para; /* default tune setting */
> > struct msdc_tune_para saved_tune_para; /* tune result of
> > CMD21/CMD19 */
> > @@ -1527,10 +1533,12 @@ static void msdc_enable_sdio_irq(struct
> > mmc_host *mmc, int enb)
> > __msdc_enable_sdio_irq(host, enb);
> > spin_unlock_irqrestore(&host->lock, flags);
> >
> > - if (enb)
> > - pm_runtime_get_noresume(host->dev);
> > - else
> > - pm_runtime_put_noidle(host->dev);
> > + if (mmc->card && !mmc->card->cccr.enable_async_irq) {
> > + if (enb)
> > + pm_runtime_get_noresume(host->dev);
> > + else
> > + pm_runtime_put_noidle(host->dev);
> > + }
> > }
> >
> > static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32
> > intsts)
> > @@ -2461,6 +2469,50 @@ static const struct mmc_host_ops mt_msdc_ops
> > = {
> > .hw_reset = msdc_hw_reset,
> > };
> >
> > +static irqreturn_t msdc_sdio_eint_irq(int irq, void *dev_id)
> > +{
> > + struct msdc_host *host = dev_id;
> > + struct mmc_host *mmc = mmc_from_priv(host);
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (likely(host->sdio_irq_cnt > 0)) {
> > + disable_irq_nosync(host->eint_irq);
> > + disable_irq_wake(host->eint_irq);
> > + host->sdio_irq_cnt--;
> > + }
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + sdio_signal_irq(mmc);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int msdc_request_dat1_eint_irq(struct msdc_host *host)
> > +{
> > + struct gpio_desc *desc;
> > + int irq, ret;
> > +
> > + desc = devm_gpiod_get(host->dev, "eint", GPIOD_IN);
> > + if (IS_ERR(desc))
> > + return PTR_ERR(desc);
> > +
> > + ret = gpiod_to_irq(desc);
> > + if (ret < 0)
> > + return ret;
> > +
> > + irq = ret;
> > + ret = devm_request_threaded_irq(host->dev, irq, NULL,
> > msdc_sdio_eint_irq,
> > + IRQF_TRIGGER_LOW | IRQF_ONESHOT
> > | IRQF_NO_AUTOEN,
> > + "sdio-eint", host);
> > + if (ret)
> > + return ret;
> > +
> > + host->eint_irq = irq;
> > +
> > + return 0;
> > +}
> > +
> > static const struct cqhci_host_ops msdc_cmdq_ops = {
> > .enable = msdc_cqe_enable,
> > .disable = msdc_cqe_disable,
> > @@ -2631,6 +2683,23 @@ static int msdc_drv_probe(struct
> > platform_device *pdev)
> > goto host_free;
> > }
> >
> > + if (!(mmc->caps2 & MMC_CAP2_NO_SDIO)) {
>
> Please, also check for the async irq capability here:
>
> if (!(mmc->caps2 & MMC_CAP2_NO_SDIO) && (mmc->caps2 &
> MMC_CAP2_SDIO_ASYNC_IRQ)) {
>
> ...because if we have "state_eint" specified in DT, but we didn't
> *also* specify
> cap-sdio-async-irq, then clearly we don't want to use this
> functionality - hence
> it becomes useless to register the interrupt handler for that because
> we're never
> enabling the CCCR_INTERRUPT_EXT on the card (from
> drivers/mmc/core/host.c).
>
> Regards,
> Angelo
Thanks, will fix this in next version.
>
> > + /* Support for SDIO eint irq */
> > + host->pins_eint = pinctrl_lookup_state(host->pinctrl,
> > "state_eint");
> > + if (IS_ERR(host->pins_eint)) {
> > + dev_dbg(&pdev->dev, "Cannot find pinctrl
> > eint!\n");
> > + } else {
> > + host->pins_dat1 = pinctrl_lookup_state(host-
> > >pinctrl, "state_dat1");
> > + if (IS_ERR(host->pins_dat1)) {
> > + ret = dev_err_probe(&pdev->dev,
> > PTR_ERR(host->pins_dat1),
> > + "Cannot find
> > pinctrl dat1!\n");
> > + goto host_free;
> > + }
> > +
> > + host->sdio_eint_ready = true;
> > + }
> > + }
> > +
> > msdc_of_property_parse(pdev, host);
> >
> > host->dev = &pdev->dev;
> > @@ -2722,6 +2791,16 @@ static int msdc_drv_probe(struct
> > platform_device *pdev)
> > if (ret)
> > goto release;
> >
> > + if (host->sdio_eint_ready) {
> > + ret = msdc_request_dat1_eint_irq(host);
> > + if (ret) {
> > + dev_err(host->dev, "Failed to register data1
> > eint irq!\n");
> > + goto release;
> > + }
> > +
> > + pinctrl_select_state(host->pinctrl, host->pins_dat1);
> > + }
> > +
> > pm_runtime_set_active(host->dev);
> > pm_runtime_set_autosuspend_delay(host->dev,
> > MTK_MMC_AUTOSUSPEND_DELAY);
> > pm_runtime_use_autosuspend(host->dev);
> > @@ -2841,16 +2920,31 @@ static void msdc_restore_reg(struct
> > msdc_host *host)
> >
> > static int __maybe_unused msdc_runtime_suspend(struct device
> > *dev)
> > {
> > + unsigned long flags;
> > struct mmc_host *mmc = dev_get_drvdata(dev);
> > struct msdc_host *host = mmc_priv(mmc);
> >
> > msdc_save_reg(host);
> > +
> > + if (host->sdio_eint_ready) {
> > + disable_irq(host->irq);
> > + pinctrl_select_state(host->pinctrl, host->pins_eint);
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (host->sdio_irq_cnt == 0) {
> > + enable_irq(host->eint_irq);
> > + enable_irq_wake(host->eint_irq);
> > + host->sdio_irq_cnt++;
> > + }
> > + sdr_clr_bits(host->base + SDC_CFG, SDC_CFG_SDIOIDE);
> > + spin_unlock_irqrestore(&host->lock, flags);
> > + }
> > msdc_gate_clock(host);
> > return 0;
> > }
> >
> > static int __maybe_unused msdc_runtime_resume(struct device *dev)
> > {
> > + unsigned long flags;
> > struct mmc_host *mmc = dev_get_drvdata(dev);
> > struct msdc_host *host = mmc_priv(mmc);
> > int ret;
> > @@ -2860,10 +2954,25 @@ static int __maybe_unused
> > msdc_runtime_resume(struct device *dev)
> > return ret;
> >
> > msdc_restore_reg(host);
> > +
> > + if (host->sdio_eint_ready) {
> > + spin_lock_irqsave(&host->lock, flags);
> > + if (host->sdio_irq_cnt > 0) {
> > + disable_irq_nosync(host->eint_irq);
> > + disable_irq_wake(host->eint_irq);
> > + host->sdio_irq_cnt--;
> > + sdr_set_bits(host->base + SDC_CFG,
> > SDC_CFG_SDIOIDE);
> > + } else {
> > + sdr_clr_bits(host->base + MSDC_INTEN,
> > MSDC_INTEN_SDIOIRQ);
> > + }
> > + spin_unlock_irqrestore(&host->lock, flags);
> > + pinctrl_select_state(host->pinctrl, host->pins_uhs);
> > + enable_irq(host->irq);
> > + }
> > return 0;
> > }
> >
> > -static int __maybe_unused msdc_suspend(struct device *dev)
> > +static int __maybe_unused msdc_suspend_noirq(struct device *dev)
> > {
> > struct mmc_host *mmc = dev_get_drvdata(dev);
> > int ret;
> > @@ -2877,13 +2986,13 @@ static int __maybe_unused
> > msdc_suspend(struct device *dev)
> > return pm_runtime_force_suspend(dev);
> > }
> >
> > -static int __maybe_unused msdc_resume(struct device *dev)
> > +static int __maybe_unused msdc_resume_noirq(struct device *dev)
> > {
> > return pm_runtime_force_resume(dev);
> > }
> >
> > static const struct dev_pm_ops msdc_dev_pm_ops = {
> > - SET_SYSTEM_SLEEP_PM_OPS(msdc_suspend, msdc_resume)
> > + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(msdc_suspend_noirq,
> > msdc_resume_noirq)
> > SET_RUNTIME_PM_OPS(msdc_runtime_suspend, msdc_runtime_resume,
> > NULL)
> > };
> >
> >
>
>
