[PATCH 2/4] riscv: dts: Change the macro name of prci in each device node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, these marcos are referenced by some device nodes,
they should be modified as well.

Signed-off-by: Zong Li <zong.li@xxxxxxxxxx>
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 22 +++++++++---------
 arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 26 +++++++++++-----------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 0655b5c4201d..2bb88e06e3e2 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -163,7 +163,7 @@ uart0: serial@10010000 {
 			reg = <0x0 0x10010000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <4>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 		dma: dma@3000000 {
@@ -178,7 +178,7 @@ uart1: serial@10011000 {
 			reg = <0x0 0x10011000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <5>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 		i2c0: i2c@10030000 {
@@ -186,7 +186,7 @@ i2c0: i2c@10030000 {
 			reg = <0x0 0x10030000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <50>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -199,7 +199,7 @@ qspi0: spi@10040000 {
 			       0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <51>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -210,7 +210,7 @@ qspi1: spi@10041000 {
 			       0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -220,7 +220,7 @@ qspi2: spi@10050000 {
 			reg = <0x0 0x10050000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <6>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -233,8 +233,8 @@ eth0: ethernet@10090000 {
 			       0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
-			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
-				 <&prci PRCI_CLK_GEMGXLPLL>;
+			clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>,
+				 <&prci FU540_PRCI_CLK_GEMGXLPLL>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -244,7 +244,7 @@ pwm0: pwm@10020000 {
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <42 43 44 45>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -253,7 +253,7 @@ pwm1: pwm@10021000 {
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <46 47 48 49>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -279,7 +279,7 @@ gpio: gpio@10060000 {
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index abbb960f90a0..38fa29db8a90 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -166,7 +166,7 @@ uart0: serial@10010000 {
 			reg = <0x0 0x10010000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <39>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		uart1: serial@10011000 {
@@ -174,7 +174,7 @@ uart1: serial@10011000 {
 			reg = <0x0 0x10011000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <40>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		i2c0: i2c@10030000 {
@@ -182,7 +182,7 @@ i2c0: i2c@10030000 {
 			reg = <0x0 0x10030000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -194,7 +194,7 @@ i2c1: i2c@10031000 {
 			reg = <0x0 0x10031000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <53>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -207,7 +207,7 @@ qspi0: spi@10040000 {
 			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <41>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -218,7 +218,7 @@ qspi1: spi@10041000 {
 			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <42>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -228,7 +228,7 @@ spi0: spi@10050000 {
 			reg = <0x0 0x10050000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <43>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -241,8 +241,8 @@ eth0: ethernet@10090000 {
 			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
-			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
-				 <&prci PRCI_CLK_GEMGXLPLL>;
+			clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>,
+				 <&prci FU740_PRCI_CLK_GEMGXLPLL>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -252,7 +252,7 @@ pwm0: pwm@10020000 {
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <44>, <45>, <46>, <47>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -261,7 +261,7 @@ pwm1: pwm@10021000 {
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <48>, <49>, <50>, <51>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -287,7 +287,7 @@ gpio: gpio@10060000 {
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		pcie@e00000000 {
@@ -316,7 +316,7 @@ pcie@e00000000 {
 					<0x0 0x0 0x0 0x3 &plic0 59>,
 					<0x0 0x0 0x0 0x4 &plic0 60>;
 			clock-names = "pcie_aux";
-			clocks = <&prci PRCI_CLK_PCIE_AUX>;
+			clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
 			pwren-gpios = <&gpio 5 0>;
 			reset-gpios = <&gpio 8 0>;
 			resets = <&prci 4>;
-- 
2.31.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux