On 18/01/2022 15:48, Alim Akhtar wrote: > Add initial clock support for FSD (Full Self-Driving) SoC > which is required to bring-up platforms based on this SoC. > > Cc: linux-fsd@xxxxxxxxx > Signed-off-by: Jayati Sahu <jayati.sahu@xxxxxxxxxxx> > Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> > Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx> > Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx> > --- > drivers/clk/samsung/Kconfig | 7 + > drivers/clk/samsung/Makefile | 1 + > drivers/clk/samsung/clk-fsd.c | 308 ++++++++++++++++++++++++++++++++++ > drivers/clk/samsung/clk-pll.c | 1 + > drivers/clk/samsung/clk-pll.h | 1 + > 5 files changed, 318 insertions(+) > create mode 100644 drivers/clk/samsung/clk-fsd.c > > diff --git a/drivers/clk/samsung/Kconfig b/drivers/clk/samsung/Kconfig > index 0e18d6ff2916..11587eb87fc4 100644 > --- a/drivers/clk/samsung/Kconfig > +++ b/drivers/clk/samsung/Kconfig > @@ -124,3 +124,10 @@ config S3C2443_COMMON_CLK > help > Support for the clock controller present on the Samsung > S3C2416/S3C2443 SoCs. Choose Y here only if you build for this SoC. > + > +config TESLA_FSD_COMMON_CLK > + bool "Tesla FSD clock controller support" if COMPILE_TEST > + depends on COMMON_CLK_SAMSUNG > + help > + Support for the clock controller present on the Tesla FSD SoC. > + Choose Y here only if you build for this SoC. The clock drivers Kconfig is organized in a way, that platform should select only COMMON_CLK_SAMSUNG (first comment in a file), so let's keep it consistent also for FSD. "select TESLA_FSD_COMMON_CLK if ARM64 && ARCH_TESLA_FSD" and skip the select in Kconfig.platform in following patch. Best regards, Krzysztof
