Since ref_gpmi is sourced from pll0 (480MHz), It allows the GPMI
controller to manage High-Speed NAND Timing (edo mode 3,4 and 5).
Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx>
---
Changes in v2:
- Reparent by device tree instead of code (drivers/clk/mxs/clk-imx28.c).
Suggested by Stephen Boyd.
arch/arm/boot/dts/imx28.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 84d0176d5193..130b4145af82 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -110,6 +110,8 @@ gpmi: nand-controller@8000c000 {
interrupt-names = "bch";
clocks = <&clks 50>;
clock-names = "gpmi_io";
+ assigned-clocks = <&clks 13>;
+ assigned-clock-parents = <&clks 10>;
dmas = <&dma_apbh 4>;
dma-names = "rx-tx";
status = "disabled";
--
2.32.0
