[PATCH 0/4] usb: phy: generic: Support enabling/disabling VBUS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The generic USB phy has had VBUS-related code for a long time, but it
has always been broken, since the regulator was never gotten from the
device tree. However, the support itself seems not very useful, since
e.g.  usb_phy_vbus_on/off has no users and usb_phy_set_power is only
used by gadgets to make sure they don't draw too much current. Instead,
use the VBUS regulator to implement otg_set_vbus, which is called from
several drivers. This results in a change in semantics of VBUS, but
since support was always broken I don't think this will have any affect.


Sean Anderson (4):
  dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator
  usb: phy: generic: Get the vbus supply
  usb: phy: generic: Implement otg->set_vbus
  usb: phy: generic: Disable vbus on removal

 .../bindings/usb/usb-nop-xceiv.yaml           |  8 +--
 drivers/usb/phy/phy-generic.c                 | 55 +++++++++----------
 2 files changed, 31 insertions(+), 32 deletions(-)

-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux