Some devices support sampling of the parallel data at both edges of the
interface pixel clock in order to reduce the pixel clock by two.
Add a mediabus flag that represents this feature.
Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
---
drivers/media/v4l2-core/v4l2-fwnode.c | 23 +++++++++++++++++++----
include/media/v4l2-mediabus.h | 17 +++++++++--------
2 files changed, 28 insertions(+), 12 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
index 00457e1e93f6..70adf6549f5b 100644
--- a/drivers/media/v4l2-core/v4l2-fwnode.c
+++ b/drivers/media/v4l2-core/v4l2-fwnode.c
@@ -296,10 +296,25 @@ v4l2_fwnode_endpoint_parse_parallel_bus(struct fwnode_handle *fwnode,
if (!fwnode_property_read_u32(fwnode, "pclk-sample", &v)) {
flags &= ~(V4L2_MBUS_PCLK_SAMPLE_RISING |
- V4L2_MBUS_PCLK_SAMPLE_FALLING);
- flags |= v ? V4L2_MBUS_PCLK_SAMPLE_RISING :
- V4L2_MBUS_PCLK_SAMPLE_FALLING;
- pr_debug("pclk-sample %s\n", v ? "high" : "low");
+ V4L2_MBUS_PCLK_SAMPLE_FALLING |
+ V4L2_MBUS_PCLK_SAMPLE_DUALEDGE);
+ switch (v) {
+ case 0:
+ flags |= V4L2_MBUS_PCLK_SAMPLE_FALLING;
+ pr_debug("pclk-sample low\n");
+ break;
+ case 1:
+ flags |= V4L2_MBUS_PCLK_SAMPLE_RISING;
+ pr_debug("pclk-sample high\n");
+ break;
+ case 2:
+ flags |= V4L2_MBUS_PCLK_SAMPLE_DUALEDGE;
+ pr_debug("pclk-sample dual edge\n");
+ break;
+ default:
+ pr_warn("invalid argument for pclk-sample");
+ break;
+ }
}
if (!fwnode_property_read_u32(fwnode, "data-active", &v)) {
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 841e190aedd9..c98f956ef586 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -57,17 +57,18 @@
#define V4L2_MBUS_VSYNC_ACTIVE_LOW BIT(5)
#define V4L2_MBUS_PCLK_SAMPLE_RISING BIT(6)
#define V4L2_MBUS_PCLK_SAMPLE_FALLING BIT(7)
-#define V4L2_MBUS_DATA_ACTIVE_HIGH BIT(8)
-#define V4L2_MBUS_DATA_ACTIVE_LOW BIT(9)
+#define V4L2_MBUS_PCLK_SAMPLE_DUALEDGE BIT(8)
+#define V4L2_MBUS_DATA_ACTIVE_HIGH BIT(9)
+#define V4L2_MBUS_DATA_ACTIVE_LOW BIT(10)
/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */
-#define V4L2_MBUS_FIELD_EVEN_HIGH BIT(10)
+#define V4L2_MBUS_FIELD_EVEN_HIGH BIT(11)
/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */
-#define V4L2_MBUS_FIELD_EVEN_LOW BIT(11)
+#define V4L2_MBUS_FIELD_EVEN_LOW BIT(12)
/* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */
-#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH BIT(12)
-#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW BIT(13)
-#define V4L2_MBUS_DATA_ENABLE_HIGH BIT(14)
-#define V4L2_MBUS_DATA_ENABLE_LOW BIT(15)
+#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH BIT(13)
+#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW BIT(14)
+#define V4L2_MBUS_DATA_ENABLE_HIGH BIT(15)
+#define V4L2_MBUS_DATA_ENABLE_LOW BIT(16)
/* Serial flags */
/* CSI-2 D-PHY number of data lanes. */
--
2.30.2
