Quoting Douglas Anderson (2022-01-13 16:43:03) > Add the new herobrine-r1. Note that this is pretty much a re-design > compared to herobrine-r0 so we don't attempt any dtsi to share stuff > between them. > > This patch attempts to define things at 3 levels: > > 1. The Qcard level. Herobrine includes a Qcard PCB and the Qcard PCB > is supposed to be the same (modulo stuffing options) across > multiple boards, so trying to define what's there hopefully makes > sense. NOTE that newer "CRD" boards from Qualcomm also use > Qcard. When support for CRD3 is added hopefully it can use the > Qcard include (and perhaps we should even evaluate it using > herobrine.dtsi?) > 2. The herobrine "baseboard" level. Right now most stuff is here with > the exception of things that we _know_ will be different per > board. We know that not all boards will have the same set of eMMC, > nvme, and SD. We also know that the exact pin names are likely to > be different. > 3. The actual "board" level, AKA herobrine-rev1. > > NOTES: > - This boots to command prompt, but no eDP yet since eDP hasn't > been added to sc7280.dtsi yet. > - This assumes LTE for now. Once it's clear how WiFi-only SKUs will > work we expect some small changes. > > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> > --- Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
