Re: [PATCH v2 1/2] ASoC: add support for TAS5805M digital amplifier

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 13, 2022 at 10:18:27AM +0100, Amadeusz Sławiński wrote:
> > +static int tas5805m_vol_put(struct snd_kcontrol *kcontrol,
> > +			    struct snd_ctl_elem_value *ucontrol)
> > +{
> > +	struct snd_soc_component *component =
> > +		snd_soc_kcontrol_component(kcontrol);
> > +	struct tas5805m_priv *tas5805m =
> > +		snd_soc_component_get_drvdata(component);
> > +
> > +	if (!(volume_is_valid(ucontrol->value.integer.value[0]) &&
> > +	      volume_is_valid(ucontrol->value.integer.value[1])))
> > +		return -EINVAL;
> > +
> > +	mutex_lock(&tas5805m->lock);
> > +	tas5805m->vol[0] = ucontrol->value.integer.value[0];
> > +	tas5805m->vol[1] = ucontrol->value.integer.value[1];
> > +	dev_dbg(component->dev, "set vol=%d/%d (is_powered=%d)\n",
> > +		tas5805m->vol[0], tas5805m->vol[1], tas5805m->is_powered);
> > +	if (tas5805m->is_powered)
> > +		tas5805m_refresh_unlocked(component);
> > +	mutex_unlock(&tas5805m->lock);
> > +
> > +	return 0;
> > +}
> > +
> 
> put method should return '1' if value changed, so ALSA knows to inform
> userspace utilities about change. You can check if userspace is notified of
> changes with "alsactl monitor", you should see something like:
> node hw:2, #3 (2,0,0,ADC0 Capture Volume,0) VALUE
> when value changes.

Thanks, will fix this.

-- 
Daniel Beer
Firmware Engineer at Igor Institute
daniel.beer@xxxxxxxxxxxxxxxxx or +64-27-420-8101
Offices in Seattle, San Francisco, and Vancouver BC or (206) 494-3312



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux