From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> Add yaml binding for msm8998 dpu1 support. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> Signed-off-by: Jami Kettunen <jami.kettunen@xxxxxxxxxxxxxx> --- .../bindings/display/msm/dpu-msm8998.yaml | 219 ++++++++++++++++++ 1 file changed, 219 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml new file mode 100644 index 000000000000..167bc48748d7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -0,0 +1,219 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-msm8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties for MSM8998 target + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> + +description: | + Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates + sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree + bindings of MDSS and DPU are mentioned for MSM8998 target. + +properties: + compatible: + items: + - const: qcom,msm8998-mdss + + reg: + maxItems: 1 + + reg-names: + const: mdss + + power-domains: + maxItems: 1 + + clocks: + items: + - description: Display AHB clock + - description: Display AXI clock + - description: Display core clock + + clock-names: + items: + - const: iface + - const: bus + - const: core + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#address-cells": true + + "#size-cells": true + + "#interrupt-cells": + const: 1 + + iommus: + items: + - description: Phandle to apps_smmu node with SID mask for Hard-Fail port0 + + ranges: true + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + description: Node containing the properties of DPU. + + properties: + compatible: + items: + - const: qcom,msm8998-dpu + + reg: + items: + - description: Address offset and size for mdp register set + - description: Address offset and size for regdma register set + - description: Address offset and size for vbif register set + - description: Address offset and size for non-realtime vbif register set + + reg-names: + items: + - const: mdp + - const: regdma + - const: vbif + - const: vbif_nrt + + clocks: + items: + - description: Display ahb clock + - description: Display axi clock + - description: Display mem-noc clock + - description: Display core clock + - description: Display vsync clock + + clock-names: + items: + - const: iface + - const: bus + - const: mnoc + - const: core + - const: vsync + + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF1 (DSI1) + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: DPU_INTF2 (DSI2) + + required: + - port@0 + - port@1 + + required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +required: + - compatible + - reg + - reg-names + - power-domains + - clocks + - interrupts + - interrupt-controller + - iommus + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,mmcc-msm8998.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + display-subsystem@c900000 { + compatible = "qcom,msm8998-mdss"; + reg = <0x0c900000 0x1000>; + reg-names = "mdss"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + + #address-cells = <1>; + #interrupt-cells = <1>; + #size-cells = <1>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + iommus = <&mmss_smmu 0>; + + power-domains = <&mmcc MDSS_GDSC>; + ranges; + + display-controller@c901000 { + compatible = "qcom,msm8998-dpu"; + reg = <0x0c901000 0x8f000>, + <0x0c9a8e00 0xf0>, + <0x0c9b0000 0x2008>, + <0x0c9b8000 0x1040>; + reg-names = "mdp", "regdma", "vbif", "vbif_nrt"; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MNOC_AHB_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "mnoc", "core", "vsync"; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + }; +... -- 2.34.1
