Re: [PATCH v9 08/24] wfx: add bus_sdio.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



[...]

> +static const struct of_device_id wfx_sdio_of_match[] = {
> +       { .compatible = "silabs,wf200",    .data = &pdata_wf200 },
> +       { .compatible = "silabs,brd4001a", .data = &pdata_brd4001a },
> +       { .compatible = "silabs,brd8022a", .data = &pdata_brd8022a },
> +       { .compatible = "silabs,brd8023a", .data = &pdata_brd8023a },
> +       { .compatible = "silabs,wfx-sdio", .data = &pdata_wfx_sdio },
> +       { },
> +};
> +MODULE_DEVICE_TABLE(of, wfx_sdio_of_match);
> +
> +static int wfx_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
> +{
> +       const struct wfx_platform_data *pdata = of_device_get_match_data(&func->dev);
> +       struct device_node *np = func->dev.of_node;
> +       struct wfx_sdio_priv *bus;
> +       int ret;
> +
> +       if (func->num != 1) {
> +               dev_err(&func->dev, "SDIO function number is %d while it should always be 1 (unsupported chip?)\n",
> +                       func->num);
> +               return -ENODEV;
> +       }
> +
> +       if (!pdata) {
> +               dev_warn(&func->dev, "no compatible device found in DT\n");
> +               return -ENODEV;
> +       }
> +
> +       bus = devm_kzalloc(&func->dev, sizeof(*bus), GFP_KERNEL);
> +       if (!bus)
> +               return -ENOMEM;
> +
> +       bus->func = func;
> +       bus->of_irq = irq_of_parse_and_map(np, 0);
> +       sdio_set_drvdata(func, bus);
> +       func->card->quirks |= MMC_QUIRK_LENIENT_FN0 |
> +                             MMC_QUIRK_BLKSZ_FOR_BYTE_MODE |
> +                             MMC_QUIRK_BROKEN_BYTE_MODE_512;

This should not be needed any more, right?

> +
> +       sdio_claim_host(func);
> +       ret = sdio_enable_func(func);
> +       /* Block of 64 bytes is more efficient than 512B for frame sizes < 4k */
> +       sdio_set_block_size(func, 64);
> +       sdio_release_host(func);
> +       if (ret)
> +               return ret;
> +
> +       bus->core = wfx_init_common(&func->dev, pdata, &wfx_sdio_hwbus_ops, bus);
> +       if (!bus->core) {
> +               ret = -EIO;
> +               goto sdio_release;
> +       }
> +
> +       ret = wfx_probe(bus->core);
> +       if (ret)
> +               goto sdio_release;
> +
> +       return 0;
> +
> +sdio_release:
> +       sdio_claim_host(func);
> +       sdio_disable_func(func);
> +       sdio_release_host(func);
> +       return ret;
> +}

[...]

Other than the above, this looks good to me!


Kind regards
Uffe



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux