Re: [PATCH 1/2] arm64: dts: exynos: Link DSI panel at port@1 for TM2 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+CC: dri-devel

On 10.01.2022 16:27, Jagan Teki wrote:
TM2 board DSI pipeline has input from MIC and output to
s6e3ha2 panel.

The existing pipeline has child nodes of ports, panel and
MIC is remote-endpoint reference of port@0 of ports.

Adding panel as another child node to DSI is unconventional
as pipeline has ports child. However it can be true if MIC
is added inside port node like this.

dsi {
	compatible = "samsung,exynos5433-mipi-dsi";
	#address-cells = <1>;
	#size-cells = <0>;

	port {
		dsi_to_mic: endpoint {
			remote-endpoint = <&mic_to_dsi>;
		};
	};

	panel@0 {
		compatible = "samsung,s6e3hf2";
                 reg = <0>;
                 vdd3-supply = <&ldo27_reg>;
                 vci-supply = <&ldo28_reg>;
                 reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
                 enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
	};
};

The above pipeline is proper but it requires the DSI input MIC
pipeline to update.

This patch is trying to add panel at port@1 so-that the entire
pipeline before to panel output is untouched.

Reported-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
  arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 16 ++++++++++++++++
  1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index aca01709fd29..e13210c8d7e0 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -53,6 +53,16 @@ &cmu_disp {
  };
&dsi {
+	ports {
+		port@1 {
+			reg = <1>;
+
+			dsi_out_panel: endpoint {
+				remote-endpoint = <&dsi_in_panel>;
+			};
+		};
+	};
+
  	panel@0 {
  		compatible = "samsung,s6e3ha2";
  		reg = <0>;
@@ -60,6 +70,12 @@ panel@0 {
  		vci-supply = <&ldo28_reg>;
  		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
  		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+
+		port {
+			dsi_in_panel: endpoint {
+				remote-endpoint = <&dsi_out_panel>;
+			};
+		};


As I already wrote in Exynos thread, DSI host has already parent-child relation with the panel - DSI host knows well who is connected to it. Adding another links between them is redundant and has no value added.

I have already answered in Exynos thread[1] how could you deal with the issue, you have.

[1]: https://lore.kernel.org/dri-devel/e541c52b-9751-933b-5eac-783dd0ed9056@xxxxxxxxx/


Regards

Andrzej


  	};
  };



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux