Re: [PATCH] ARM: dts: msm8960: Sort out rpm node duplication

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun 09 Jan 12:03 PST 2022, David Heidelberg wrote:

> On other platforms are usually regulators enumerated in platform and
> used in devices, follow the pattern on MSM8960 too.

I used to be a proponent of this, but as we grew the number of devices
supported we noticed that not everyone uses the same set of PMICs.
And then we have cases where non-Qualcomm people drew the schematics and
picked different names for the regulator lines - which we want to be
able to represent in the labels.

As such, I would prefer if we moved those other platforms towards
specifying the regulators in the board dts instead of platform dtsi.
Even though it does imply that there's some level of duplication.

Regards,
Bjorn

> 
> No functional changes.
> 
> Original author: Bjorn Andersson
> 
> Signed-off-by: David Heidelberg <david@xxxxxxx>
> ---
>  arch/arm/boot/dts/qcom-msm8960-cdp.dts | 73 +++++++++++++-------------
>  arch/arm/boot/dts/qcom-msm8960.dtsi    | 43 +++++++++++++++
>  2 files changed, 79 insertions(+), 37 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> index 830703759466..7c4c3cb79d05 100644
> --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> @@ -49,7 +49,6 @@ sdcc3: mmc@12180000 {
>  
>  		rpm@108000 {
>  			regulators {
> -				compatible = "qcom,rpm-pm8921-regulators";
>  				vin_lvs1_3_6-supply = <&pm8921_s4>;
>  				vin_lvs2-supply = <&pm8921_s4>;
>  				vin_lvs4_5_7-supply = <&pm8921_s4>;
> @@ -62,7 +61,7 @@ regulators {
>  				vdd_l28-supply = <&pm8921_s7>;
>  
>  				/* Buck SMPS */
> -				pm8921_s1: s1 {
> +				s1 {
>  					regulator-always-on;
>  					regulator-min-microvolt = <1225000>;
>  					regulator-max-microvolt = <1225000>;
> @@ -70,21 +69,21 @@ pm8921_s1: s1 {
>  					bias-pull-down;
>  				};
>  
> -				pm8921_s2: s2 {
> +				s2 {
>  					regulator-min-microvolt = <1300000>;
>  					regulator-max-microvolt = <1300000>;
>  					qcom,switch-mode-frequency = <1600000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_s3: s3 {
> +				s3 {
>  					regulator-min-microvolt = <500000>;
>  					regulator-max-microvolt = <1150000>;
>  					qcom,switch-mode-frequency = <4800000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_s4: s4 {
> +				s4 {
>  					regulator-always-on;
>  					regulator-min-microvolt = <1800000>;
>  					regulator-max-microvolt = <1800000>;
> @@ -93,14 +92,14 @@ pm8921_s4: s4 {
>  					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
>  				};
>  
> -				pm8921_s7: s7 {
> +				s7 {
>  					regulator-min-microvolt = <1150000>;
>  					regulator-max-microvolt = <1150000>;
>  					qcom,switch-mode-frequency = <3200000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_s8: s8 {
> +				s8 {
>  					regulator-always-on;
>  					regulator-min-microvolt = <2050000>;
>  					regulator-max-microvolt = <2050000>;
> @@ -109,137 +108,137 @@ pm8921_s8: s8 {
>  				};
>  
>  				/* PMOS LDO */
> -				pm8921_l1: l1 {
> +				l1 {
>  					regulator-always-on;
>  					regulator-min-microvolt = <1050000>;
>  					regulator-max-microvolt = <1050000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l2: l2 {
> +				l2 {
>  					regulator-min-microvolt = <1200000>;
>  					regulator-max-microvolt = <1200000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l3: l3 {
> +				l3 {
>  					regulator-min-microvolt = <3075000>;
>  					regulator-max-microvolt = <3075000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l4: l4 {
> +				l4 {
>  					regulator-always-on;
>  					regulator-min-microvolt = <1800000>;
>  					regulator-max-microvolt = <1800000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l5: l5 {
> +				l5 {
>  					regulator-min-microvolt = <2950000>;
>  					regulator-max-microvolt = <2950000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l6: l6 {
> +				l6 {
>  					regulator-min-microvolt = <2950000>;
>  					regulator-max-microvolt = <2950000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l7: l7 {
> +				l7 {
>  					regulator-always-on;
>  					regulator-min-microvolt = <1850000>;
>  					regulator-max-microvolt = <2950000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l8: l8 {
> +				l8 {
>  					regulator-min-microvolt = <2800000>;
>  					regulator-max-microvolt = <3000000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l9: l9 {
> +				l9 {
>  					regulator-min-microvolt = <3000000>;
>  					regulator-max-microvolt = <3000000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l10: l10 {
> +				l10 {
>  					regulator-min-microvolt = <3000000>;
>  					regulator-max-microvolt = <3000000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l11: l11 {
> +				l11 {
>  					regulator-min-microvolt = <2850000>;
>  					regulator-max-microvolt = <2850000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l12: l12 {
> +				l12 {
>  					regulator-min-microvolt = <1200000>;
>  					regulator-max-microvolt = <1200000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l14: l14 {
> +				l14 {
>  					regulator-min-microvolt = <1800000>;
>  					regulator-max-microvolt = <1800000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l15: l15 {
> +				l15 {
>  					regulator-min-microvolt = <1800000>;
>  					regulator-max-microvolt = <2950000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l16: l16 {
> +				l16 {
>  					regulator-min-microvolt = <2800000>;
>  					regulator-max-microvolt = <2800000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l17: l17 {
> +				l17 {
>  					regulator-min-microvolt = <1800000>;
>  					regulator-max-microvolt = <2950000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l18: l18 {
> +				l18 {
>  					regulator-min-microvolt = <1300000>;
>  					regulator-max-microvolt = <1300000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l21: l21 {
> +				l21 {
>  					regulator-min-microvolt = <1900000>;
>  					regulator-max-microvolt = <1900000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l22: l22 {
> +				l22 {
>  					regulator-min-microvolt = <2750000>;
>  					regulator-max-microvolt = <2750000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l23: l23 {
> +				l23 {
>  					regulator-always-on;
>  					regulator-min-microvolt = <1800000>;
>  					regulator-max-microvolt = <1800000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l24: l24 {
> +				l24 {
>  					regulator-min-microvolt = <750000>;
>  					regulator-max-microvolt = <1150000>;
>  					bias-pull-down;
>  				};
>  
> -				pm8921_l25: l25 {
> +				l25 {
>  					regulator-always-on;
>  					regulator-min-microvolt = <1250000>;
>  					regulator-max-microvolt = <1250000>;
> @@ -247,35 +246,35 @@ pm8921_l25: l25 {
>  				};
>  
>  				/* Low Voltage Switch */
> -				pm8921_lvs1: lvs1 {
> +				lvs1 {
>  					bias-pull-down;
>  				};
>  
> -				pm8921_lvs2: lvs2 {
> +				lvs2 {
>  					bias-pull-down;
>  				};
>  
> -				pm8921_lvs3: lvs3 {
> +				lvs3 {
>  					bias-pull-down;
>  				};
>  
> -				pm8921_lvs4: lvs4 {
> +				lvs4 {
>  					bias-pull-down;
>  				};
>  
> -				pm8921_lvs5: lvs5 {
> +				lvs5 {
>  					bias-pull-down;
>  				};
>  
> -				pm8921_lvs6: lvs6 {
> +				lvs6 {
>  					bias-pull-down;
>  				};
>  
> -				pm8921_lvs7: lvs7 {
> +				lvs7 {
>  					bias-pull-down;
>  				};
>  
> -				pm8921_ncp: ncp {
> +				ncp {
>  					regulator-min-microvolt = <1800000>;
>  					regulator-max-microvolt = <1800000>;
>  					qcom,switch-mode-frequency = <1600000>;
> diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
> index d9033912c7f3..ffedc60f9ec1 100644
> --- a/arch/arm/boot/dts/qcom-msm8960.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
> @@ -154,6 +154,49 @@ rpm@108000 {
>  
>  			regulators {
>  				compatible = "qcom,rpm-pm8921-regulators";
> +
> +				/* Buck SMPS */
> +				pm8921_s1: s1 {};
> +				pm8921_s2: s2 {};
> +				pm8921_s3: s3 {};
> +				pm8921_s4: s4 {};
> +				pm8921_s7: s7 {};
> +				pm8921_s8: s8 {};
> +
> +				/* PMOS LDO */
> +				pm8921_l1: l1 {};
> +				pm8921_l2: l2 {};
> +				pm8921_l3: l3 {};
> +				pm8921_l4: l4 {};
> +				pm8921_l5: l5 {};
> +				pm8921_l6: l6 {};
> +				pm8921_l7: l7 {};
> +				pm8921_l8: l8 {};
> +				pm8921_l9: l9 {};
> +				pm8921_l10: l10 {};
> +				pm8921_l11: l11 {};
> +				pm8921_l12: l12 {};
> +				pm8921_l14: l14 {};
> +				pm8921_l15: l15 {};
> +				pm8921_l16: l16 {};
> +				pm8921_l17: l17 {};
> +				pm8921_l18: l18 {};
> +				pm8921_l21: l21 {};
> +				pm8921_l22: l22 {};
> +				pm8921_l23: l23 {};
> +				pm8921_l24: l24 {};
> +				pm8921_l25: l25 {};
> +
> +				/* Low Voltage Switch */
> +				pm8921_lvs1: lvs1 {};
> +				pm8921_lvs2: lvs2 {};
> +				pm8921_lvs3: lvs3 {};
> +				pm8921_lvs4: lvs4 {};
> +				pm8921_lvs5: lvs5 {};
> +				pm8921_lvs6: lvs6 {};
> +				pm8921_lvs7: lvs7 {};
> +
> +				pm8921_ncp: ncp {};
>  			};
>  		};
>  
> -- 
> 2.34.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux