This simplifies resetting the UART controller during probe and will make it easier to integrate the common clock code which will require the registers at probe time as well. Signed-off-by: Yu Tu <yu.tu@xxxxxxxxxxx> --- drivers/tty/serial/meson_uart.c | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index c9a37602ffd0..99efe62a1507 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -397,24 +397,11 @@ static int meson_uart_verify_port(struct uart_port *port, static void meson_uart_release_port(struct uart_port *port) { - devm_iounmap(port->dev, port->membase); - port->membase = NULL; - devm_release_mem_region(port->dev, port->mapbase, port->mapsize); + /* nothing to do */ } static int meson_uart_request_port(struct uart_port *port) { - if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize, - dev_name(port->dev))) { - dev_err(port->dev, "Memory region busy\n"); - return -EBUSY; - } - - port->membase = devm_ioremap(port->dev, port->mapbase, - port->mapsize); - if (!port->membase) - return -ENOMEM; - return 0; } @@ -728,6 +715,10 @@ static int meson_uart_probe(struct platform_device *pdev) if (!port) return -ENOMEM; + port->membase = devm_ioremap_resource(&pdev->dev, res_mem); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + ret = meson_uart_probe_clocks(pdev, port); if (ret) return ret; @@ -749,10 +740,7 @@ static int meson_uart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, port); /* reset port before registering (and possibly registering console) */ - if (meson_uart_request_port(port) >= 0) { - meson_uart_reset(port); - meson_uart_release_port(port); - } + meson_uart_reset(port); ret = uart_add_one_port(&meson_uart_driver, port); if (ret) base-commit: b3a9e3b9622ae10064826dccb4f7a52bd88c7407 prerequisite-patch-id: 97a514f3447511cb204179ce03ae99dc1d5902d9 -- 2.33.1