Add compitable/reg/irq/clock/efuse/reset setting in svs node. Signed-off-by: Roger Lu <roger.lu@xxxxxxxxxxxx> --- arch/arm64/boot/dts/mediatek/mt8192.dtsi | 39 ++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi index c7c7d4e017ae..c111e26489dd 100644 --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi @@ -9,6 +9,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pinctrl/mt8192-pinfunc.h> +#include <dt-bindings/reset/ti-syscon.h> + / { compatible = "mediatek,mt8192"; @@ -268,6 +270,14 @@ compatible = "mediatek,mt8192-infracfg", "syscon"; reg = <0 0x10001000 0 0x1000>; #clock-cells = <1>; + + infracfg_rst: reset-controller { + compatible = "mediatek,infra-reset", "ti,syscon-reset"; + #reset-cells = <1>; + ti,reset-bits = < + 0x150 5 0x154 5 0 0 (ASSERT_SET | DEASSERT_SET | STATUS_NONE) /* 0: svs */ + >; + }; }; pericfg: syscon@10003000 { @@ -362,6 +372,20 @@ status = "disabled"; }; + svs: svs@1100b000 { + compatible = "mediatek,mt8192-svs"; + reg = <0 0x1100b000 0 0x1000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&infracfg CLK_INFRA_THERM>; + clock-names = "main"; + nvmem-cells = <&svs_calibration>, + <&lvts_e_data1>; + nvmem-cell-names = "svs-calibration-data", + "t-calibration-data"; + resets = <&infracfg_rst 0>; + reset-names = "svs_rst"; + }; + spi1: spi@11010000 { compatible = "mediatek,mt8192-spi", "mediatek,mt6765-spi"; @@ -479,6 +503,21 @@ #clock-cells = <1>; }; + efuse: efuse@11c10000 { + compatible = "mediatek,efuse"; + reg = <0 0x11c10000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + lvts_e_data1: data1@1c0 { + reg = <0x1c0 0x58>; + }; + + svs_calibration: calib@580 { + reg = <0x580 0x68>; + }; + }; + i2c3: i2c3@11cb0000 { compatible = "mediatek,mt8192-i2c"; reg = <0 0x11cb0000 0 0x1000>, -- 2.18.0