Compared to the A1 SoCs the number of RESET registers is different
and the offset for the level registers is the same. Add a new
compatible string and struct meson_reset_param to add support for the
reset controller on the S4 SoC.
Signed-off-by: Zelong Dong <zelong.dong@xxxxxxxxxxx>
---
drivers/reset/reset-meson.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c
index c9bc325ad65a..26dc54778615 100644
--- a/drivers/reset/reset-meson.c
+++ b/drivers/reset/reset-meson.c
@@ -98,11 +98,17 @@ static const struct meson_reset_param meson_a1_param = {
.level_offset = 0x40,
};
+static const struct meson_reset_param meson_s4_param = {
+ .reg_count = 6,
+ .level_offset = 0x40,
+};
+
static const struct of_device_id meson_reset_dt_ids[] = {
{ .compatible = "amlogic,meson8b-reset", .data = &meson8b_param},
{ .compatible = "amlogic,meson-gxbb-reset", .data = &meson8b_param},
{ .compatible = "amlogic,meson-axg-reset", .data = &meson8b_param},
{ .compatible = "amlogic,meson-a1-reset", .data = &meson_a1_param},
+ { .compatible = "amlogic,meson-s4-reset", .data = &meson_s4_param},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, meson_reset_dt_ids);
--
2.34.1
