From: Linus Walleij <linus.walleij@xxxxxxxxxx> The supply names of the Zinitix touchscreen were a bit confused, the new bindings rectifies this. To deal with old and new devicetrees, first check if we have "vddo" and in case that exists assume the old supply names. Else go and look for the new ones. We cannot just get the regulators since we would get an OK and a dummy regulator: we need to check explicitly for the old supply name. Use struct device *dev as a local variable instead of the I2C client since the device is what we are actually obtaining the resources from. Cc: Mark Brown <broonie@xxxxxxxxxx> Cc: Michael Srba <Michael.Srba@xxxxxxxxx> Cc: phone-devel@xxxxxxxxxxxxxxx Cc: devicetree@xxxxxxxxxxxxxxx Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> [Slightly changed the legacy regulator detection] Signed-off-by: Nikita Travkin <nikita@xxxxxxx> --- This patch was previously submitted here: https://lore.kernel.org/linux-input/20210625113435.2539282-2-linus.walleij@xxxxxxxxxx/ Changes since the original patch: - Address the review comments by Dmitry: Drop explicit OF check and use of_find_property() Changes in v2: - Reword the legacy regulator comment to drop "... and warn" as no warning is done. (I think adding a warning is not very useful here) --- drivers/input/touchscreen/zinitix.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/drivers/input/touchscreen/zinitix.c b/drivers/input/touchscreen/zinitix.c index 1e70b8d2a8d7..e84e4c3b1b3a 100644 --- a/drivers/input/touchscreen/zinitix.c +++ b/drivers/input/touchscreen/zinitix.c @@ -252,16 +252,27 @@ static int zinitix_init_touch(struct bt541_ts_data *bt541) static int zinitix_init_regulators(struct bt541_ts_data *bt541) { - struct i2c_client *client = bt541->client; + struct device *dev = &bt541->client->dev; int error; - bt541->supplies[0].supply = "vdd"; - bt541->supplies[1].supply = "vddo"; - error = devm_regulator_bulk_get(&client->dev, + /* + * Some older device trees have erroneous names for the regulators, + * so check if "vddo" is present and in that case use these names. + * Else use the proper supply names on the component. + */ + if (of_find_property(dev->of_node, "vddo-supply", NULL)) { + bt541->supplies[0].supply = "vdd"; + bt541->supplies[1].supply = "vddo"; + } else { + /* Else use the proper supply names */ + bt541->supplies[0].supply = "vcca"; + bt541->supplies[1].supply = "vdd"; + } + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(bt541->supplies), bt541->supplies); if (error < 0) { - dev_err(&client->dev, "Failed to get regulators: %d\n", error); + dev_err(dev, "Failed to get regulators: %d\n", error); return error; } -- 2.30.2
